- MUIC
- Others
-config PMIC_PM8916
- bool "Enable Driver Model for Qualcomm PM8916 PMIC"
+config PMIC_QCOM
+ bool "Enable Driver Model for Qualcomm generic PMIC"
---help---
- The PM8916 is a PMIC connected to one (or several) processors
+ The Qcom PMIC is connected to one (or several) processors
with SPMI bus. It has 2 slaves with several peripherals:
- 18x LDO
- 4x GPIO
- Vibrator drivers
- Others
- Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt
+ Driver binding info: doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
config PMIC_RK8XX
bool "Enable support for Rockchip PMIC RK8XX"
regulators Real-Time Clock and 4 GPIOs. This driver provides
register access only.
+config SPL_PMIC_RN5T567
+ bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
+ depends on SPL_DM_PMIC
+ ---help---
+ The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
+ regulators Real-Time Clock and 4 GPIOs. This driver provides
+ register access only.
+
config PMIC_TPS65090
bool "Enable driver for Texas Instruments TPS65090 PMIC"
---help---
only, and you can enable the regulator/charger drivers separately if
required.
+config POWER_TPS65218
+ bool "Enable legacy driver for TPS65218 PMIC"
+
+config POWER_TPS62362
+ bool "Enable legacy driver for TPS62362 PMIC"
+
+config SPL_POWER_TPS62362
+ bool "Enable legacy driver for TPS62362 PMIC in SPL"
+ default y if POWER_TPS62362
+ depends on SPL
+
+config SPL_POWER_TPS65910
+ bool "Enable legacy driver for TPS65910 PMIC in SPL"
+ depends on SPL
+
+if POWER_LEGACY || SPL_POWER_LEGACY
+
+config POWER_HI6553
+ bool "Enable legacy driver for HI6553 PMIC"
+
+config POWER_LTC3676
+ bool "Enable legacy driver for LTC3676 PMIC"
+
+config POWER_PFUZE100
+ bool "Enable legacy driver for PFUZE100 PMIC"
+
+config POWER_PFUZE3000
+ bool "Enable legacy driver for PFUZE3000 PMIC"
+
config POWER_MC34VR500
bool "Enable driver for Freescale MC34VR500 PMIC"
- depends on !DM_PMIC
---help---
The MC34VR500 is used in conjunction with the FSL T1 and LS1 series
SoC. It provides 4 buck DC-DC convertors and 5 LDOs, and it is accessed
via an I2C interface.
+
+endif