sunxi: Add support for Allwinner A64 SoCs

[platform/kernel/u-boot.git] / drivers / power / Kconfig

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index adc6455..3c41bca 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -10,7 +10,7 @@ choice
        default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
        default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
        default AXP818_POWER if MACH_SUN8I_A83T
-       default SUNXI_NO_PMIC if MACH_SUN8I_H3
+       default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
 
 config SUNXI_NO_PMIC
        boolean "board without a pmic"
@@ -118,13 +118,12 @@ config AXP_DCDC4_VOLT
 config AXP_DCDC5_VOLT
        int "axp pmic dcdc5 voltage"
        depends on AXP221_POWER || AXP818_POWER
-       default 1800 if AXP818_POWER
        default 1500 if MACH_SUN6I || MACH_SUN8I
        ---help---
        Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
        disable dcdc5.
        On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
-       1.8V for A83T.
+       1.35V if DDR3L is used.
 
 config AXP_ALDO1_VOLT
        int "axp pmic (a)ldo1 voltage"
@@ -239,6 +238,33 @@ config AXP_ELDO3_VOLT
        1.2V for the SSD2828 chip (converter of parallel LCD interface
        into MIPI DSI).
 
+config AXP_FLDO1_VOLT
+       int "axp pmic fldo1 voltage"
+       depends on AXP818_POWER
+       default 0 if MACH_SUN8I_A83T
+       ---help---
+       Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
+       disable fldo1.
+       On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
+       used.
+
+config AXP_FLDO2_VOLT
+       int "axp pmic eldo2 voltage"
+       depends on AXP818_POWER
+       default 900 if MACH_SUN8I_A83T
+       ---help---
+       Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
+       disable fldo2.
+       On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
+
+config AXP_FLDO3_VOLT
+       int "axp pmic fldo3 voltage"
+       depends on AXP818_POWER
+       default 0
+       ---help---
+       Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
+       disable fldo3.
+
 config SY8106A_VOUT1_VOLT
        int "SY8106A pmic VOUT1 voltage"
        depends on SY8106A_POWER