depends on ARCH_SUNXI
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+ default AXP305_POWER if MACH_SUN50I_H616
default AXP818_POWER if MACH_SUN8I_A83T
- default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
config SUNXI_NO_PMIC
bool "board without a pmic"
config AXP209_POWER
bool "axp209 pmic support"
- depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S
select AXP_PMIC_BUS
select CMD_POWEROFF
---help---
Select this to enable support for the axp221/axp223 pmic found on most
A23 and A31 boards.
+config AXP305_POWER
+ bool "axp305 pmic support"
+ depends on MACH_SUN50I_H616
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Select this to enable support for the axp305 pmic found on most
+ H616 boards.
+
config AXP809_POWER
bool "axp809 pmic support"
depends on MACH_SUN9I
config AXP_DCDC4_VOLT
int "axp pmic dcdc4 voltage"
- depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+ depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
default 1250 if AXP152_POWER
default 1200 if MACH_SUN6I
default 0 if MACH_SUN8I
default 900 if MACH_SUN9I
+ default 1500 if AXP305_POWER
---help---
Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
disable dcdc4.
On A23 / A33 boards dcdc4 is unused and should be disabled.
On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
On A83T boards dcdc4 is used for VDD-GPU.
+ On H616 boards dcdcd is used for VCC-DRAM.
config AXP_DCDC5_VOLT
int "axp pmic dcdc5 voltage"
config AXP_ALDO3_INRUSH_QUIRK
bool "axp pmic (a)ldo3 inrush quirk"
depends on AXP209_POWER
- default n
---help---
The reference design denotes a value of 4.7 uF for the output capacitor
of LDO3. Some boards have too high capacitance causing an inrush current
config AXP_SW_ON
bool "axp pmic sw on"
depends on AXP809_POWER || AXP818_POWER
- default n
---help---
Enable to turn on axp pmic sw.
The TWL4030 in a combination audio CODEC/power management with
GPIO and it is commonly used with the OMAP3 family of processors
+config POWER_MT6323
+ bool "Poweroff driver for mediatek mt6323"
+ select CMD_POWEROFF
+ help
+ This adds poweroff driver for mt6323
+ this pmic is used on mt7623 / Bananapi R2
+
endmenu