.name = #alias, \
.pins = n##_pins, \
.mux = n##_mux, \
- .nr_pins = ARRAY_SIZE(n##_pins), \
+ .nr_pins = ARRAY_SIZE(n##_pins) + \
+ BUILD_BUG_ON_ZERO(sizeof(n##_pins) != sizeof(n##_mux)), \
}
#define SH_PFC_PIN_GROUP(n) SH_PFC_PIN_GROUP_ALIAS(n, n)
struct pinmux_cfg_reg {
u32 reg;
u8 reg_width, field_width;
+#ifdef DEBUG
+ u16 nr_enum_ids; /* for variable width regs only */
+#define SET_NR_ENUM_IDS(n) .nr_enum_ids = n,
+#else
+#define SET_NR_ENUM_IDS(n)
+#endif
const u16 *enum_ids;
const u8 *var_field_width;
};
+#define GROUP(...) __VA_ARGS__
+
/*
* Describe a config register consisting of several fields of the same width
* - name: Register name (unused, for documentation purposes only)
* - r: Physical register address
* - r_width: Width of the register (in bits)
* - f_width: Width of the fixed-width register fields (in bits)
- * This macro must be followed by initialization data: For each register field
- * (from left to right, i.e. MSB to LSB), 2^f_width enum IDs must be specified,
- * one for each possible combination of the register field bit values.
+ * - ids: For each register field (from left to right, i.e. MSB to LSB),
+ * 2^f_width enum IDs must be specified, one for each possible
+ * combination of the register field bit values, all wrapped using
+ * the GROUP() macro.
*/
-#define PINMUX_CFG_REG(name, r, r_width, f_width) \
- .reg = r, .reg_width = r_width, .field_width = f_width, \
- .enum_ids = (const u16 [(r_width / f_width) * (1 << f_width)])
+#define PINMUX_CFG_REG(name, r, r_width, f_width, ids) \
+ .reg = r, .reg_width = r_width, \
+ .field_width = f_width + BUILD_BUG_ON_ZERO(r_width % f_width) + \
+ BUILD_BUG_ON_ZERO(sizeof((const u16 []) { ids }) / sizeof(u16) != \
+ (r_width / f_width) * (1 << f_width)), \
+ .enum_ids = (const u16 [(r_width / f_width) * (1 << f_width)]) \
+ { ids }
/*
* Describe a config register consisting of several fields of different widths
* - name: Register name (unused, for documentation purposes only)
* - r: Physical register address
* - r_width: Width of the register (in bits)
- * - var_fw0, var_fwn...: List of widths of the register fields (in bits),
- * From left to right (i.e. MSB to LSB)
- * This macro must be followed by initialization data: For each register field
- * (from left to right, i.e. MSB to LSB), 2^var_fwi enum IDs must be specified,
- * one for each possible combination of the register field bit values.
+ * - f_widths: List of widths of the register fields (in bits), from left
+ * to right (i.e. MSB to LSB), wrapped using the GROUP() macro.
+ * - ids: For each register field (from left to right, i.e. MSB to LSB),
+ * 2^f_widths[i] enum IDs must be specified, one for each possible
+ * combination of the register field bit values, all wrapped using
+ * the GROUP() macro.
*/
-#define PINMUX_CFG_REG_VAR(name, r, r_width, var_fw0, var_fwn...) \
- .reg = r, .reg_width = r_width, \
- .var_field_width = (const u8 [r_width]) \
- { var_fw0, var_fwn, 0 }, \
- .enum_ids = (const u16 [])
+#define PINMUX_CFG_REG_VAR(name, r, r_width, f_widths, ids) \
+ .reg = r, .reg_width = r_width, \
+ .var_field_width = (const u8 []) { f_widths, 0 }, \
+ SET_NR_ENUM_IDS(sizeof((const u16 []) { ids }) / sizeof(u16)) \
+ .enum_ids = (const u16 []) { ids }
struct pinmux_drive_reg_field {
u16 pin;
* - name: Register name (unused, for documentation purposes only)
* - r: Physical register address
* - r_width: Width of the register (in bits)
- * This macro must be followed by initialization data: For each register bit
- * (from left to right, i.e. MSB to LSB), one enum ID must be specified.
+ * - ids: For each register bit (from left to right, i.e. MSB to LSB), one
+ * enum ID must be specified, all wrapped using the GROUP() macro.
*/
-#define PINMUX_DATA_REG(name, r, r_width) \
- .reg = r, .reg_width = r_width, \
- .enum_ids = (const u16 [r_width]) \
+#define PINMUX_DATA_REG(name, r, r_width, ids) \
+ .reg = r, .reg_width = r_width + \
+ BUILD_BUG_ON_ZERO(sizeof((const u16 []) { ids }) / sizeof(u16) != \
+ r_width), \
+ .enum_ids = (const u16 [r_width]) { ids }
struct pinmux_irq {
const short *gpios;
sh_pfc_pin_to_bias_reg(const struct sh_pfc *pfc, unsigned int pin,
unsigned int *bit);
+extern const struct sh_pfc_soc_info r8a774a1_pinmux_info;
+extern const struct sh_pfc_soc_info r8a774b1_pinmux_info;
+extern const struct sh_pfc_soc_info r8a774e1_pinmux_info;
extern const struct sh_pfc_soc_info r8a7790_pinmux_info;
extern const struct sh_pfc_soc_info r8a7791_pinmux_info;
extern const struct sh_pfc_soc_info r8a7792_pinmux_info;
extern const struct sh_pfc_soc_info r8a7796_pinmux_info;
extern const struct sh_pfc_soc_info r8a77965_pinmux_info;
extern const struct sh_pfc_soc_info r8a77970_pinmux_info;
+extern const struct sh_pfc_soc_info r8a77980_pinmux_info;
extern const struct sh_pfc_soc_info r8a77990_pinmux_info;
extern const struct sh_pfc_soc_info r8a77995_pinmux_info;
/*
* Describe a pinmux configuration in which a pin is physically multiplexed
* with other pins.
- * - ipsr: IPSR field
- * - fn: Function name, also referring to the IPSR field
+ * - ipsr: IPSR field (unused, for documentation purposes only)
+ * - fn: Function name
* - psel: Physical multiplexing selector
*/
#define PINMUX_IPSR_PHYS(ipsr, fn, psel) \
*/
#define PORTCR(nr, reg) \
{ \
- PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, 2, 2, 1, 3) {\
+ PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, \
+ GROUP(2, 2, 1, 3), \
+ GROUP( \
/* PULMD[1:0], handled by .set_bias() */ \
0, 0, 0, 0, \
/* IE and OE */ \
PORT##nr##_FN2, PORT##nr##_FN3, \
PORT##nr##_FN4, PORT##nr##_FN5, \
PORT##nr##_FN6, PORT##nr##_FN7 \
- } \
+ )) \
}
/*
*/
#define RCAR_GP_PIN(bank, pin) (((bank) * 32) + (pin))
+#include <linux/bug.h>
#endif /* __SH_PFC_H */
projects / platform / kernel / u-boot.git / blobdiff