#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
+#include <malloc.h>
#include <mapmem.h>
#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include <dt-bindings/phy/phy.h>
/* version V1 sub-banks offset base address */
/* banks shared by multiple phys */
#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
+#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */
+/* u2 phy bank */
+#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
/* u3/pcie/sata phy banks */
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
#define SSUSB_SIFSLV_V1_U3PHYA 0x200
+/* version V2 sub-banks offset base address */
+/* u2 phy banks */
+#define SSUSB_SIFSLV_V2_MISC 0x000
+#define SSUSB_SIFSLV_V2_U2FREQ 0x100
+#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V2_SPLLC 0x000
+#define SSUSB_SIFSLV_V2_CHIP 0x100
+#define SSUSB_SIFSLV_V2_U3PHYD 0x200
+#define SSUSB_SIFSLV_V2_U3PHYA 0x400
+
+#define U3P_USBPHYACR0 0x000
+#define PA0_RG_U2PLL_FORCE_ON BIT(15)
+#define PA0_RG_USB20_INTR_EN BIT(5)
+
+#define U3P_USBPHYACR5 0x014
+#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
+#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
+#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
+#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
+
+#define U3P_USBPHYACR6 0x018
+#define PA6_RG_U2_BC11_SW_EN BIT(23)
+#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
+#define PA6_RG_U2_SQTH GENMASK(3, 0)
+#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
+
+#define U3P_U2PHYACR4 0x020
+#define P2C_RG_USB20_GPIO_CTL BIT(9)
+#define P2C_USB20_GPIO_MODE BIT(8)
+#define P2C_U2_GPIO_CTR_MSK \
+ (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
+
+#define U3P_U2PHYDTM0 0x068
+#define P2C_FORCE_UART_EN BIT(26)
+#define P2C_FORCE_DATAIN BIT(23)
+#define P2C_FORCE_DM_PULLDOWN BIT(21)
+#define P2C_FORCE_DP_PULLDOWN BIT(20)
+#define P2C_FORCE_XCVRSEL BIT(19)
+#define P2C_FORCE_SUSPENDM BIT(18)
+#define P2C_FORCE_TERMSEL BIT(17)
+#define P2C_RG_DATAIN GENMASK(13, 10)
+#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
+#define P2C_RG_DMPULLDOWN BIT(7)
+#define P2C_RG_DPPULLDOWN BIT(6)
+#define P2C_RG_XCVRSEL GENMASK(5, 4)
+#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
+#define P2C_RG_SUSPENDM BIT(3)
+#define P2C_RG_TERMSEL BIT(2)
+#define P2C_DTM0_PART_MASK \
+ (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
+ P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
+ P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
+ P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
+
+#define U3P_U2PHYDTM1 0x06C
+#define P2C_RG_UART_EN BIT(16)
+#define P2C_FORCE_IDDIG BIT(9)
+#define P2C_RG_VBUSVALID BIT(5)
+#define P2C_RG_SESSEND BIT(4)
+#define P2C_RG_AVALID BIT(2)
+#define P2C_RG_IDDIG BIT(1)
+
#define U3P_U3_CHIP_GPIO_CTLD 0x0c
#define P3C_REG_IP_SW_RST BIT(31)
#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
+#define U3P_U3_PHYA_REG6 0x018
+#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
+#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
+
+#define U3P_U3_PHYA_REG9 0x024
+#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
+#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
+
#define U3P_U3_PHYA_DA_REG0 0x100
#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
+#define U3P_U3_PHYD_LFPS1 0x00c
+#define P3D_RG_FWAKE_TH GENMASK(21, 16)
+#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
+
+#define U3P_U3_PHYD_CDR1 0x05c
+#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
+#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
+#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
+#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
+
#define U3P_U3_PHYD_RXDET1 0x128
#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9)
#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x))
+#define U3P_SPLLC_XTALCTL3 0x018
+#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
+#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
+
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4 0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
+#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
+#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define PHYD_DESIGN_OPTION2 0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
+#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
+
+#define PHYD_DESIGN_OPTION9 0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK GENMASK(20, 16)
+#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK GENMASK(13, 8)
+#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK GENMASK(7, 5)
+#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK GENMASK(4, 0)
+#define RG_T2_MIN_VAL(x) (0x1f & (x))
+
+#define ANA_RG_CTRL_SIGNAL1 0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
+#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL4 0x58
+#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
+#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL6 0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
+#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
+#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
+#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
+#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
+
+enum mtk_phy_version {
+ MTK_TPHY_V1 = 1,
+ MTK_TPHY_V2,
+};
+
+struct u2phy_banks {
+ void __iomem *misc;
+ void __iomem *fmreg;
+ void __iomem *com;
+};
+
struct u3phy_banks {
void __iomem *spllc;
void __iomem *chip;
struct mtk_phy_instance {
void __iomem *port_base;
const struct device_node *np;
+ union {
+ struct u2phy_banks u2_banks;
+ struct u3phy_banks u3_banks;
+ };
- struct u3phy_banks u3_banks;
-
- /* reference clock of anolog phy */
- struct clk ref_clk;
+ struct clk ref_clk; /* reference clock of (digital) phy */
+ struct clk da_ref_clk; /* reference clock of analog phy */
u32 index;
- u8 type;
+ u32 type;
};
struct mtk_tphy {
+ struct udevice *dev;
void __iomem *sif_base;
+ enum mtk_phy_version version;
struct mtk_phy_instance **phys;
int nphys;
};
+static void u2_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+
+ /* switch to USB function, and enable usb pll */
+ clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM0,
+ P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM,
+ P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0));
+
+ clrbits_le32(u2_banks->com + U3P_U2PHYDTM1, P2C_RG_UART_EN);
+ setbits_le32(u2_banks->com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN);
+
+ /* disable switch 100uA current to SSUSB */
+ clrbits_le32(u2_banks->com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
+
+ clrbits_le32(u2_banks->com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
+
+ /* DP/DM BC1.1 path Disable */
+ clrsetbits_le32(u2_banks->com + U3P_USBPHYACR6,
+ PA6_RG_U2_BC11_SW_EN | PA6_RG_U2_SQTH,
+ PA6_RG_U2_SQTH_VAL(2));
+
+ /* set HS slew rate */
+ clrsetbits_le32(u2_banks->com + U3P_USBPHYACR5,
+ PA5_RG_U2_HSTX_SRCTRL, PA5_RG_U2_HSTX_SRCTRL_VAL(4));
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+
+ clrbits_le32(u2_banks->com + U3P_U2PHYDTM0,
+ P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+
+ /* OTG Enable */
+ setbits_le32(u2_banks->com + U3P_USBPHYACR6,
+ PA6_RG_U2_OTG_VBUSCMP_EN);
+
+ clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1,
+ P2C_RG_SESSEND, P2C_RG_VBUSVALID | P2C_RG_AVALID);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+
+ clrbits_le32(u2_banks->com + U3P_U2PHYDTM0,
+ P2C_RG_XCVRSEL | P2C_RG_DATAIN);
+
+ /* OTG Disable */
+ clrbits_le32(u2_banks->com + U3P_USBPHYACR6,
+ PA6_RG_U2_OTG_VBUSCMP_EN);
+
+ clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1,
+ P2C_RG_VBUSVALID | P2C_RG_AVALID, P2C_RG_SESSEND);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void u3_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ /* gating PCIe Analog XTAL clock */
+ setbits_le32(u3_banks->spllc + U3P_SPLLC_XTALCTL3,
+ XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD);
+
+ /* gating XSQ */
+ clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0,
+ P3A_RG_XTAL_EXT_EN_U3, P3A_RG_XTAL_EXT_EN_U3_VAL(2));
+
+ clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG9,
+ P3A_RG_RX_DAC_MUX, P3A_RG_RX_DAC_MUX_VAL(4));
+
+ clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG6,
+ P3A_RG_TX_EIDLE_CM, P3A_RG_TX_EIDLE_CM_VAL(0xe));
+
+ clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_CDR1,
+ P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1,
+ P3D_RG_CDR_BIR_LTD0_VAL(0xc) |
+ P3D_RG_CDR_BIR_LTD1_VAL(0x3));
+
+ clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_LFPS1,
+ P3D_RG_FWAKE_TH, P3D_RG_FWAKE_TH_VAL(0x34));
+
+ clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
+ P3D_RG_RXDET_STB2_SET, P3D_RG_RXDET_STB2_SET_VAL(0x10));
+
+ clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
+ P3D_RG_RXDET_STB2_SET_P3,
+ P3D_RG_RXDET_STB2_SET_P3_VAL(0x10));
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
static void pcie_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *u3_banks = &instance->u3_banks;
+ if (tphy->version != MTK_TPHY_V1)
+ return;
+
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0,
P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
P3A_RG_XTAL_EXT_PE1H_VAL(0x2) |
udelay(3000);
}
+static void sata_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL6,
+ RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK,
+ RG_CDR_BIRLTR_GEN1_VAL(0x6) |
+ RG_CDR_BC_GEN1_VAL(0x1a));
+ clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL4,
+ RG_CDR_BIRLTD0_GEN1_MSK,
+ RG_CDR_BIRLTD0_GEN1_VAL(0x18));
+ clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL5,
+ RG_CDR_BIRLTD0_GEN3_MSK,
+ RG_CDR_BIRLTD0_GEN3_VAL(0x06));
+ clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL4,
+ RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK,
+ RG_CDR_BICLTR_GEN1_VAL(0x0c) |
+ RG_CDR_BR_GEN2_VAL(0x07));
+ clrsetbits_le32(u3_banks->phyd + PHYD_CTRL_SIGNAL_MODE4,
+ RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK,
+ RG_CDR_BICLTD0_GEN1_VAL(0x08) |
+ RG_CDR_BICLTD1_GEN1_VAL(0x02));
+ clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION2,
+ RG_LOCK_CNT_SEL_MSK,
+ RG_LOCK_CNT_SEL_VAL(0x02));
+ clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION9,
+ RG_T2_MIN_MSK | RG_TG_MIN_MSK |
+ RG_T2_MAX_MSK | RG_TG_MAX_MSK,
+ RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
+ RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e));
+ clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL1,
+ RG_IDRV_0DB_GEN1_MSK,
+ RG_IDRV_0DB_GEN1_VAL(0x20));
+ clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL1,
+ RG_EQ_DLEQ_LFI_GEN1_MSK,
+ RG_EQ_DLEQ_LFI_GEN1_VAL(0x03));
+}
+
static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
static void phy_v1_banks_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
struct u3phy_banks *u3_banks = &instance->u3_banks;
switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = NULL;
+ u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
case PHY_TYPE_PCIE:
u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
break;
+ case PHY_TYPE_SATA:
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ break;
default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
+static void phy_v2_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+ u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+ u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
return;
}
}
int ret;
ret = clk_enable(&instance->ref_clk);
- if (ret)
+ if (ret < 0) {
+ dev_err(tphy->dev, "failed to enable ref_clk\n");
+ return ret;
+ }
+
+ ret = clk_enable(&instance->da_ref_clk);
+ if (ret < 0) {
+ dev_err(tphy->dev, "failed to enable da_ref_clk %d\n", ret);
+ clk_disable(&instance->ref_clk);
return ret;
+ }
switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_USB3:
+ u3_phy_instance_init(tphy, instance);
+ break;
case PHY_TYPE_PCIE:
pcie_phy_instance_init(tphy, instance);
break;
+ case PHY_TYPE_SATA:
+ sata_phy_instance_init(tphy, instance);
+ break;
default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
return -EINVAL;
}
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
- pcie_phy_instance_power_on(tphy, instance);
+ if (instance->type == PHY_TYPE_USB2)
+ u2_phy_instance_power_on(tphy, instance);
+ else if (instance->type == PHY_TYPE_PCIE)
+ pcie_phy_instance_power_on(tphy, instance);
return 0;
}
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
- pcie_phy_instance_power_off(tphy, instance);
+ if (instance->type == PHY_TYPE_USB2)
+ u2_phy_instance_power_off(tphy, instance);
+ else if (instance->type == PHY_TYPE_PCIE)
+ pcie_phy_instance_power_off(tphy, instance);
return 0;
}
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
+ clk_disable(&instance->da_ref_clk);
clk_disable(&instance->ref_clk);
return 0;
instance->type = args->args[1];
if (!(instance->type == PHY_TYPE_USB2 ||
instance->type == PHY_TYPE_USB3 ||
- instance->type == PHY_TYPE_PCIE ||
- instance->type == PHY_TYPE_SATA)) {
+ instance->type == PHY_TYPE_SATA ||
+ instance->type == PHY_TYPE_PCIE)) {
dev_err(phy->dev, "unsupported device type\n");
return -EINVAL;
}
- phy_v1_banks_init(tphy, instance);
+ if (tphy->version == MTK_TPHY_V1) {
+ phy_v1_banks_init(tphy, instance);
+ } else if (tphy->version == MTK_TPHY_V2) {
+ phy_v2_banks_init(tphy, instance);
+ } else {
+ dev_err(phy->dev, "phy version is not supported\n");
+ return -EINVAL;
+ }
return 0;
}
ofnode subnode;
int index = 0;
- dev_for_each_subnode(subnode, dev)
- tphy->nphys++;
+ tphy->nphys = dev_get_child_count(dev);
tphy->phys = devm_kcalloc(dev, tphy->nphys, sizeof(*tphy->phys),
GFP_KERNEL);
if (!tphy->phys)
return -ENOMEM;
- tphy->sif_base = dev_read_addr_ptr(dev);
- if (!tphy->sif_base)
- return -ENOENT;
+ tphy->dev = dev;
+ tphy->version = dev_get_driver_data(dev);
+
+ /* v1 has shared banks for usb/pcie mode, */
+ /* but not for sata mode */
+ if (tphy->version == MTK_TPHY_V1) {
+ tphy->sif_base = dev_read_addr_ptr(dev);
+ }
dev_for_each_subnode(subnode, dev) {
struct mtk_phy_instance *instance;
&instance->ref_clk);
if (err)
return err;
+
+ err = clk_get_optional_nodev(subnode, "da_ref",
+ &instance->da_ref_clk);
+ if (err)
+ return err;
}
return 0;
}
static const struct udevice_id mtk_tphy_id_table[] = {
- { .compatible = "mediatek,generic-tphy-v1", },
+ { .compatible = "mediatek,generic-tphy-v1", .data = MTK_TPHY_V1, },
+ { .compatible = "mediatek,generic-tphy-v2", .data = MTK_TPHY_V2, },
{ }
};
.of_match = mtk_tphy_id_table,
.ops = &mtk_tphy_ops,
.probe = mtk_tphy_probe,
- .priv_auto_alloc_size = sizeof(struct mtk_tphy),
+ .priv_auto = sizeof(struct mtk_tphy),
};
projects / platform / kernel / u-boot.git / blobdiff