{
unsigned char revid, tmp;
- pci_msi_quirk = 1;
- printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+ if (dev->subordinate) {
+ printk(KERN_WARNING "PCI: MSI quirk detected. "
+ "PCI_BUS_FLAGS_NO_MSI set for subordinate bus.\n");
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
if (nr_ioapics == 0)
return;
pci_write_config_byte( dev, AMD8131_MISC, tmp);
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
static void __init quirk_svw_msi(struct pci_dev *dev)
{
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
*/
static void quirk_via_irq(struct pci_dev *dev)
{
new_irq = dev->irq & 0xf;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge );
/*
+ * On the MSI-K8T-Neo2Fir Board, the internal Soundcard is disabled
+ * when a PCI-Soundcard is added. The BIOS only gives Options
+ * "Disabled" and "AUTO". This Quirk Sets the corresponding
+ * Register-Value to enable the Soundcard.
+ */
+static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+{
+ unsigned char val;
+
+ printk(KERN_INFO "PCI: Quirk-MSI-K8T Soundcard On\n");
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val == 0x88 || val == 0xc8) {
+ pci_write_config_byte(dev, 0x50, val & (~0x40));
+
+ /* Verify the Change for Status output */
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0x40)
+ printk(KERN_INFO "PCI: MSI-K8T soundcard still off\n");
+ else
+ printk(KERN_INFO "PCI: MSI-K8T soundcard on\n");
+ } else {
+ printk(KERN_INFO "PCI: Unexpected Value in PCI-Register: "
+ "no Change!\n");
+ }
+
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+
+#ifndef CONFIG_ACPI_SLEEP
+/*
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
* users to be irritated by just another PCI Device in the Win98 device
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
*/
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
switch (dev->subsystem_device) {
case 0x1882: /* M6V notebook */
+ case 0x1977: /* A6VA notebook */
asus_hides_smbus = 1;
}
}
case 0x12bd: /* HP D530 */
asus_hides_smbus = 1;
}
+ if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
+ switch (dev->subsystem_device) {
+ case 0x099c: /* HP Compaq nx6110 */
+ asus_hides_smbus = 1;
+ }
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
switch(dev->subsystem_device) {
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc );
static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
{
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
+#endif
+
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
+/*
+ * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
+ * and MC97 modem controller are disabled when a second PCI soundcard is
+ * present. This patch, tweaking the VT8237 ISA bridge, enables them.
+ * -- bjd
+ */
+static void __init asus_hides_ac97_lpc(struct pci_dev *dev)
+{
+ u8 val;
+ int asus_hides_ac97 = 0;
+
+ if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
+ if (dev->device == PCI_DEVICE_ID_VIA_8237)
+ asus_hides_ac97 = 1;
+ }
+
+ if (!asus_hides_ac97)
+ return;
+
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0) {
+ pci_write_config_byte(dev, 0x50, val & (~0xc0));
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0)
+ printk(KERN_INFO "PCI: onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val);
+ else
+ printk(KERN_INFO "PCI: enabled onboard AC97/MC97 devices\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
+
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
case 0x27c4:
ich = 7;
break;
+ case 0x2828: /* ICH8M */
+ ich = 8;
+ break;
default:
/* we do not handle this PCI device */
return;
else
return; /* not in combined mode */
} else {
- WARN_ON((ich != 6) && (ich != 7));
+ WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
tmp &= 0x3; /* interesting bits 1:0 */
if (tmp & (1 << 0))
comb = (1 << 2); /* PATA port 0, SATA port 1 */
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+/*
+ * Fixup the cardbus bridges on the IBM Dock II docking station
+ */
+static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * tie the 2 interrupt pins to INTA, and configure the
+ * multifunction routing register to handle this.
+ */
+ if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
+ (dev->subsystem_device == 0x0148)) {
+ printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge "
+ "applying quirk\n");
+ pci_read_config_dword(dev, 0x8c, &val);
+ val = ((val & 0xffffff00) | 0x1002);
+ pci_write_config_dword(dev, 0x8c, val);
+ pci_read_config_dword(dev, 0x80, &val);
+ val = ((val & 0x00ffff00) | 0x2864c077);
+ pci_write_config_dword(dev, 0x80, val);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420,
+ quirk_ibm_dock2_cardbus);
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
pci_do_fixups(dev, start, end);
}
+/* Enable 1k I/O space granularity on the Intel P64H2 */
+static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+{
+ u16 en1k;
+ u8 io_base_lo, io_limit_lo;
+ unsigned long base, limit;
+ struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
+
+ pci_read_config_word(dev, 0x40, &en1k);
+
+ if (en1k & 0x200) {
+ printk(KERN_INFO "PCI: Enable I/O Space to 1 KB Granularity\n");
+
+ pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
+ pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
+ base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
+ limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
+
+ if (base <= limit) {
+ res->start = base;
+ res->end = limit + 0x3ff;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
+
EXPORT_SYMBOL(pcie_mch_quirk);
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_fixup_device);