PCI Hotplug: cpqphp: stray whitespace cleanups

[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / pci / hotplug / cpqphp_core.c

diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index c2e1bcb..55eae4c 100644 (file)
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -25,7 +25,7 @@
  * Send feedback to <greg@kroah.com>
  *
  * Jan 12, 2003 -      Added 66/100/133MHz PCI-X support,
- *                     Torben Mathiasen <torben.mathiasen@hp.com>
+ *                     Torben Mathiasen <torben.mathiasen@hp.com>
  *
  */
 
@@ -100,8 +100,8 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
        .get_attention_status = get_attention_status,
        .get_latch_status =     get_latch_status,
        .get_adapter_status =   get_adapter_status,
-       .get_max_bus_speed =    get_max_bus_speed,
-       .get_cur_bus_speed =    get_cur_bus_speed,
+       .get_max_bus_speed =    get_max_bus_speed,
+       .get_cur_bus_speed =    get_cur_bus_speed,
 };
 
 
@@ -144,7 +144,7 @@ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *e
                        break;
                }
        }
-       
+
        if (!status)
                fp = NULL;
 
@@ -292,7 +292,7 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
        if (!smbios_table)
                return NULL;
 
-       if (!previous) {                  
+       if (!previous) {
                previous = smbios_start;
        } else {
                previous = get_subsequent_smbios_entry(smbios_start,
@@ -300,7 +300,7 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
        }
 
        while (previous) {
-               if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
+               if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
                        previous = get_subsequent_smbios_entry(smbios_start,
                                                smbios_table, previous);
                } else {
@@ -426,7 +426,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
                        cpq_get_latch_status(ctrl, slot);
                hotplug_slot_info->adapter_status =
                        get_presence_status(ctrl, slot);
-               
+
                dbg("registering bus %d, dev %d, number %d, "
                                "ctrl->slot_device_offset %d, slot %d\n",
                                slot->bus, slot->device,
@@ -440,7 +440,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
                        err("pci_hp_register failed with error %d\n", result);
                        goto error_info;
                }
-               
+
                slot->next = ctrl->slot;
                ctrl->slot = slot;
 
@@ -563,9 +563,9 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 
        }
 
-       // If we got here, we didn't find an entry in the IRQ mapping table 
-       // for the target PCI device.  If we did determine that the target 
-       // device is on the other side of a PCI-to-PCI bridge, return the 
+       // If we got here, we didn't find an entry in the IRQ mapping table
+       // for the target PCI device.  If we did determine that the target
+       // device is on the other side of a PCI-to-PCI bridge, return the
        // slot number for the bridge.
        if (bridgeSlot != 0xFF) {
                *slot = bridgeSlot;
@@ -719,7 +719,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
 
        dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
-       return cpqhp_hardware_test(ctrl, value);        
+       return cpqhp_hardware_test(ctrl, value);
 }
 
 
@@ -738,7 +738,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
        struct slot *slot = hotplug_slot->private;
        struct controller *ctrl = slot->ctrl;
-       
+
        dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
        *value = cpq_get_attention_status(ctrl, slot);
@@ -832,7 +832,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        }
 
        /* Check for the proper subsytem ID's
-        * Intel uses a different SSID programming model than Compaq.  
+        * Intel uses a different SSID programming model than Compaq.
         * For Intel, each SSID bit identifies a PHP capability.
         * Also Intel HPC's may have RID=0.
         */
@@ -1087,7 +1087,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        if (rc) {
                goto err_free_bus;
        }
-       
+
        dbg("pdev = %p\n", pdev);
        dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));
        dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0));
@@ -1182,7 +1182,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                        __func__, rc);
                goto err_iounmap;
        }
-       
+
        /* Mask all general input interrupts */
        writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
 
@@ -1291,7 +1291,6 @@ err_disable_device:
        return rc;
 }
 
-
 static int one_time_init(void)
 {
        int loop;
@@ -1328,10 +1327,10 @@ static int one_time_init(void)
                retval = -EIO;
                goto error;
        }
-       
+
        /* Now, map the int15 entry point if we are on compaq specific hardware */
        compaq_nvram_init(cpqhp_rom_start);
-       
+
        /* Map smbios table entry point structure */
        smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
                                        cpqhp_rom_start + ROM_PHY_LEN);
@@ -1361,7 +1360,6 @@ error:
        return retval;
 }
 
-
 static void __exit unload_cpqphpd(void)
 {
        struct pci_func *next;
@@ -1381,10 +1379,10 @@ static void __exit unload_cpqphpd(void)
                if (ctrl->hpc_reg) {
                        u16 misc;
                        rc = read_slot_enable (ctrl);
-                       
+
                        writeb(0, ctrl->hpc_reg + SLOT_SERR);
                        writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
-                       
+
                        misc = readw(ctrl->hpc_reg + MISC);
                        misc &= 0xFFFD;
                        writew(misc, ctrl->hpc_reg + MISC);
@@ -1475,27 +1473,23 @@ static void __exit unload_cpqphpd(void)
                iounmap(smbios_start);
 }
 
-
-
 static struct pci_device_id hpcd_pci_tbl[] = {
        {
        /* handle any PCI Hotplug controller */
        .class =        ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
        .class_mask =   ~0,
-       
+
        /* no matter who makes it */
        .vendor =       PCI_ANY_ID,
        .device =       PCI_ANY_ID,
        .subvendor =    PCI_ANY_ID,
        .subdevice =    PCI_ANY_ID,
-       
+
        }, { /* end: all zeroes */ }
 };
 
 MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
 
-
-
 static struct pci_driver cpqhpc_driver = {
        .name =         "compaq_pci_hotplug",
        .id_table =     hpcd_pci_tbl,
@@ -1503,8 +1497,6 @@ static struct pci_driver cpqhpc_driver = {
        /* remove:      cpqhpc_remove_one, */
 };
 
-
-
 static int __init cpqhpc_init(void)
 {
        int result;
@@ -1518,7 +1510,6 @@ static int __init cpqhpc_init(void)
        return result;
 }
 
-
 static void __exit cpqhpc_cleanup(void)
 {
        dbg("unload_cpqphpd()\n");
@@ -1529,8 +1520,5 @@ static void __exit cpqhpc_cleanup(void)
        cpqhp_shutdown_debugfs();
 }
 
-
 module_init(cpqhpc_init);
 module_exit(cpqhpc_cleanup);
-
-