Convert CONFIG_PCI_MSC01 to Kconfig

[platform/kernel/u-boot.git] / drivers / pci / Kconfig

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index fd22034..e4c6056 100644 (file)
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -48,6 +48,10 @@ config PCI_REGION_MULTI_ENTRY
          region type. This helps to add support for SoC's like OcteonTX/TX2
          where every peripheral is on the PCI bus.
 
+config PCI_CONFIG_HOST_BRIDGE
+       bool "Configure PCI host bridges"
+       default y if X86
+
 config PCI_MAP_SYSTEM_MEMORY
        bool "Map local system memory from a virtual base address"
        depends on MIPS
@@ -81,6 +85,10 @@ config PCI_ARID
           support on PCI devices. This helps to skip some devices in BDF
           scan that are not present.
 
+config PCI_SCAN_SHOW
+       bool "Show PCI devices during startup"
+       depends on PCIE_IMX
+
 config PCIE_ECAM_GENERIC
        bool "Generic ECAM-based PCI host controller support"
        help
@@ -97,6 +105,10 @@ config PCIE_ECAM_SYNQUACER
          Note that this must be configured when boot because Linux driver
          expects the PCIe RC has been configured in the bootloader.
 
+config PCI_GT64120
+       bool "GT64120 PCI support"
+       depends on MIPS
+
 config PCI_PHYTIUM
        bool "Phytium PCIe support"
        help
@@ -134,6 +146,10 @@ config PCI_MPC85XX
          Say Y here if you want to enable PCI controller support on FSL
          PowerPC MPC85xx SoC.
 
+config PCI_MSC01
+       bool "MSC01 PCI support"
+       depends on TARGET_MALTA
+
 config PCI_RCAR_GEN2
        bool "Renesas RCar Gen2 PCIe driver"
        depends on RCAR_32
@@ -159,6 +175,12 @@ config PCI_SANDBOX
          the device tree but the normal PCI scan technique is used to find
          then.
 
+config SH7751_PCI
+       bool "SH7751 PCI controller support"
+       depends on SH
+       help
+         SuperH PCI Bridge Configuration
+
 config PCI_TEGRA
        bool "Tegra PCI support"
        depends on ARCH_TEGRA
@@ -254,6 +276,10 @@ config FSL_PCIE_EP_COMPAT
          This compatible is used to find pci controller ep node in Kernel DT
          to complete fixup.
 
+config PCIE_IMX
+       bool "i.MX PCIe support"
+       depends on ARCH_MX6
+
 config PCIE_INTEL_FPGA
        bool "Intel FPGA PCIe support"
        help