bool "Enable Aardvark PCIe driver"
default n
depends on DM_PCI
+ depends on DM_GPIO
depends on ARMADA_3700
help
Say Y here if you want to enable PCIe controller support on
help
Enable PCI memory and I/O space resource allocation and assignment.
+config PCI_REGION_MULTI_ENTRY
+ bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
+ depends on PCI || DM_PCI
+ default n
+ help
+ Enable PCI memory regions to be of multiple entry. Multiple entry
+ here refers to allow more than one count of address ranges for MEMORY
+ region type. This helps to add support for SoC's like OcteonTX/TX2
+ where every peripheral is on the PCI bus.
+
+config PCI_SRIOV
+ bool "Enable Single Root I/O Virtualization support for PCI"
+ depends on PCI || DM_PCI
+ default n
+ help
+ Say Y here if you want to enable PCI Single Root I/O Virtualization
+ capability support. This helps to enumerate Virtual Function devices
+ if available on a PCI Physical Function device and probe for
+ applicable drivers.
+
+config PCI_ARID
+ bool "Enable Alternate Routing-ID support for PCI"
+ depends on PCI || DM_PCI
+ default n
+ help
+ Say Y here if you want to enable Alternate Routing-ID capability
+ support on PCI devices. This helps to skip some devices in BDF
+ scan that are not present.
+
config PCIE_ECAM_GENERIC
bool "Generic ECAM-based PCI host controller support"
default n
Say Y here if you want to enable support for generic ECAM-based
PCIe host controllers, such as the one emulated by QEMU.
+config PCI_PHYTIUM
+ bool "Phytium PCIe support"
+ depends on DM_PCI
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Phytium SoCs.
+
config PCIE_DW_MVEBU
bool "Enable Armada-8K PCIe driver (DesignWare core)"
depends on DM_PCI
Armada-8K SoCs. The PCIe controller on Armada-8K is based on
DesignWare hardware.
+config PCIE_FSL
+ bool "FSL PowerPC PCIe support"
+ depends on DM_PCI
+ help
+ Say Y here if you want to enable PCIe controller support on FSL
+ PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
+ This driver does not support SRIO_PCIE_BOOT feature.
+
+config PCI_MPC85XX
+ bool "MPC85XX PowerPC PCI support"
+ depends on DM_PCI
+ help
+ Say Y here if you want to enable PCI controller support on FSL
+ PowerPC MPC85xx SoC.
+
config PCI_RCAR_GEN2
bool "Renesas RCar Gen2 PCIe driver"
depends on DM_PCI
Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
also used to access EHCI USB controller on the SoC.
+config PCI_RCAR_GEN3
+ bool "Renesas RCar Gen3 PCIe driver"
+ depends on DM_PCI
+ depends on RCAR_GEN3
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Renesas RCar Gen3 SoCs.
+
config PCI_SANDBOX
bool "Sandbox PCI support"
depends on SANDBOX && DM_PCI
config PCI_TEGRA
bool "Tegra PCI support"
- depends on TEGRA
+ depends on ARCH_TEGRA
depends on (TEGRA186 && POWER_DOMAIN) || (!TEGRA186)
help
Enable support for the PCIe controller found on some generations of
with a total of 5 lanes. Some boards require this for Ethernet
support to work (e.g. beaver, jetson-tk1).
+config PCI_OCTEONTX
+ bool "OcteonTX PCI support"
+ depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ help
+ Enable support for the OcteonTX/TX2 SoC family ECAM/PEM controllers.
+ These controllers provide PCI configuration access to all on-board
+ peripherals so it should only be disabled for testing purposes
+
config PCI_XILINX
bool "Xilinx AXI Bridge for PCI Express"
depends on DM_PCI
which can be used on some generations of Xilinx FPGAs.
config PCIE_LAYERSCAPE
- bool "Layerscape PCIe support"
+ bool
+ default n
+
+config PCIE_LAYERSCAPE_RC
+ bool "Layerscape PCIe Root Complex mode support"
+ depends on DM_PCI
+ select PCIE_LAYERSCAPE
+ help
+ Enable Layerscape PCIe Root Complex mode driver support. The Layerscape
+ SoC may have one or several PCIe controllers. Each controller can be
+ configured to Root Complex mode by clearing the corresponding bit of
+ RCW[HOST_AGT_PEX].
+
+config PCI_IOMMU_EXTRA_MAPPINGS
+ bool "Support for specifying extra IOMMU mappings for PCI"
+ depends on PCIE_LAYERSCAPE_RC
+ help
+ Enable support for specifying extra IOMMU mappings for PCI
+ controllers through a special env var called "pci_iommu_extra" or
+ through a device tree property named "pci-iommu-extra" placed in
+ the node describing the PCI controller.
+ The intent is to cover SR-IOV scenarios which need mappings for VFs
+ and PCI hot-plug scenarios. More documentation can be found under:
+ arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra
+
+config PCIE_LAYERSCAPE_EP
+ bool "Layerscape PCIe Endpoint mode support"
+ depends on DM_PCI
+ select PCIE_LAYERSCAPE
+ select PCI_ENDPOINT
+ help
+ Enable Layerscape PCIe Endpoint mode driver support. The Layerscape
+ SoC may have one or several PCIe controllers. Each controller can be
+ configured to Endpoint mode by setting the corresponding bit of
+ RCW[HOST_AGT_PEX].
+
+config PCIE_LAYERSCAPE_GEN4
+ bool "Layerscape Gen4 PCIe support"
depends on DM_PCI
help
- Support Layerscape PCIe. The Layerscape SoC may have one or several
- PCIe controllers. The PCIe may works in RC or EP mode according to
- RCW[HOST_AGT_PEX] setting.
+ Support PCIe Gen4 on NXP Layerscape SoCs, which may have one or
+ several PCIe controllers. The PCIe controller can work in RC or
+ EP mode according to RCW[HOST_AGT_PEX] setting.
+
+config FSL_PCIE_COMPAT
+ string "PCIe compatible of Kernel DT"
+ depends on PCIE_LAYERSCAPE_RC || PCIE_LAYERSCAPE_GEN4
+ default "fsl,ls1012a-pcie" if ARCH_LS1012A
+ default "fsl,ls1028a-pcie" if ARCH_LS1028A
+ default "fsl,ls1043a-pcie" if ARCH_LS1043A
+ default "fsl,ls1046a-pcie" if ARCH_LS1046A
+ default "fsl,ls2080a-pcie" if ARCH_LS2080A
+ default "fsl,ls1088a-pcie" if ARCH_LS1088A
+ default "fsl,lx2160a-pcie" if ARCH_LX2160A || ARCH_LX2162A
+ default "fsl,ls1021a-pcie" if ARCH_LS1021A
+ help
+ This compatible is used to find pci controller node in Kernel DT
+ to complete fixup.
+
+config FSL_PCIE_EP_COMPAT
+ string "PCIe EP compatible of Kernel DT"
+ depends on PCIE_LAYERSCAPE_RC || PCIE_LAYERSCAPE_GEN4
+ default "fsl,lx2160a-pcie-ep" if ARCH_LX2160A || ARCH_LX2162A
+ default "fsl,ls-pcie-ep"
+ help
+ This compatible is used to find pci controller ep node in Kernel DT
+ to complete fixup.
config PCIE_INTEL_FPGA
bool "Intel FPGA PCIe support"
Say Y here if you want to enable PCIe controller support on Intel
FPGA, example Stratix 10.
+config PCIE_IPROC
+ bool "Iproc PCIe support"
+ depends on DM_PCI
+ help
+ Broadcom iProc PCIe controller driver.
+ Say Y here if you want to enable Broadcom iProc PCIe controller,
+
+config PCI_MVEBU
+ bool "Enable Armada XP/38x PCIe driver"
+ depends on ARCH_MVEBU
+ select DM_PCI
+ select MISC
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Armada XP/38x SoCs.
+
+config PCI_KEYSTONE
+ bool "TI Keystone PCIe controller"
+ depends on DM_PCI
+ help
+ Say Y here if you want to enable PCI controller support on AM654 SoC.
+
+config PCIE_MEDIATEK
+ bool "MediaTek PCIe Gen2 controller"
+ depends on DM_PCI
+ depends on ARCH_MEDIATEK
+ help
+ Say Y here if you want to enable Gen2 PCIe controller,
+ which could be found on MT7623 SoC family.
+
+config PCIE_ROCKCHIP
+ bool "Enable Rockchip PCIe driver"
+ depends on ARCH_ROCKCHIP
+ select DM_PCI
+ select PHY_ROCKCHIP_PCIE
+ default y if ROCKCHIP_RK3399
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Rockchip SoCs.
+
+config PCI_BRCMSTB
+ bool "Broadcom STB PCIe controller"
+ depends on DM_PCI
+ depends on ARCH_BCM283X
+ help
+ Say Y here if you want to enable support for PCIe controller
+ on Broadcom set-top-box (STB) SoCs.
+ This driver currently supports only BCM2711 SoC and RC mode
+ of the controller.
endif
projects / platform / kernel / u-boot.git / blobdiff