Merge tag 'u-boot-imx-20200825' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[platform/kernel/u-boot.git] / drivers / pci / Kconfig

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 6d8c22a..06d39df 100644 (file)
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -43,6 +43,35 @@ config PCI_PNP
        help
          Enable PCI memory and I/O space resource allocation and assignment.
 
+config PCI_REGION_MULTI_ENTRY
+       bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
+       depends on PCI || DM_PCI
+       default n
+       help
+         Enable PCI memory regions to be of multiple entry. Multiple entry
+         here refers to allow more than one count of address ranges for MEMORY
+         region type. This helps to add support for SoC's like OcteonTX/TX2
+         where every peripheral is on the PCI bus.
+
+config PCI_SRIOV
+       bool "Enable Single Root I/O Virtualization support for PCI"
+       depends on PCI || DM_PCI
+       default n
+       help
+         Say Y here if you want to enable PCI Single Root I/O Virtualization
+         capability support. This helps to enumerate Virtual Function devices
+         if available on a PCI Physical Function device and probe for
+         applicable drivers.
+
+config PCI_ARID
+        bool "Enable Alternate Routing-ID support for PCI"
+        depends on PCI || DM_PCI
+        default n
+        help
+          Say Y here if you want to enable Alternate Routing-ID capability
+          support on PCI devices. This helps to skip some devices in BDF
+          scan that are not present.
+
 config PCIE_ECAM_GENERIC
        bool "Generic ECAM-based PCI host controller support"
        default n
@@ -120,6 +149,14 @@ config PCI_TEGRA
          with a total of 5 lanes. Some boards require this for Ethernet
          support to work (e.g. beaver, jetson-tk1).
 
+config PCI_OCTEONTX
+       bool "OcteonTX PCI support"
+       depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+       help
+         Enable support for the OcteonTX/TX2 SoC family ECAM/PEM controllers.
+         These controllers provide PCI configuration access to all on-board
+         peripherals so it should only be disabled for testing purposes
+
 config PCI_XILINX
        bool "Xilinx AXI Bridge for PCI Express"
        depends on DM_PCI
@@ -128,12 +165,29 @@ config PCI_XILINX
          which can be used on some generations of Xilinx FPGAs.
 
 config PCIE_LAYERSCAPE
-       bool "Layerscape PCIe support"
+       bool
+       default n
+
+config PCIE_LAYERSCAPE_RC
+       bool "Layerscape PCIe Root Complex mode support"
+       depends on DM_PCI
+       select PCIE_LAYERSCAPE
+       help
+         Enable Layerscape PCIe Root Complex mode driver support. The Layerscape
+         SoC may have one or several PCIe controllers. Each controller can be
+         configured to Root Complex mode by clearing the corresponding bit of
+         RCW[HOST_AGT_PEX].
+
+config PCIE_LAYERSCAPE_EP
+       bool "Layerscape PCIe Endpoint mode support"
        depends on DM_PCI
+       select PCIE_LAYERSCAPE
+       select PCI_ENDPOINT
        help
-         Support Layerscape PCIe. The Layerscape SoC may have one or several
-         PCIe controllers. The PCIe may works in RC or EP mode according to
-         RCW[HOST_AGT_PEX] setting.
+         Enable Layerscape PCIe Endpoint mode driver support. The Layerscape
+         SoC may have one or several PCIe controllers. Each controller can be
+         configured to Endpoint mode by setting the corresponding bit of
+         RCW[HOST_AGT_PEX].
 
 config PCIE_LAYERSCAPE_GEN4
        bool "Layerscape Gen4 PCIe support"
@@ -145,7 +199,7 @@ config PCIE_LAYERSCAPE_GEN4
 
 config FSL_PCIE_COMPAT
        string "PCIe compatible of Kernel DT"
-       depends on PCIE_LAYERSCAPE || PCIE_LAYERSCAPE_GEN4
+       depends on PCIE_LAYERSCAPE_RC || PCIE_LAYERSCAPE_GEN4
        default "fsl,ls1012a-pcie" if ARCH_LS1012A
        default "fsl,ls1028a-pcie" if ARCH_LS1028A
        default "fsl,ls1043a-pcie" if ARCH_LS1043A
@@ -160,7 +214,7 @@ config FSL_PCIE_COMPAT
 
 config FSL_PCIE_EP_COMPAT
        string "PCIe EP compatible of Kernel DT"
-       depends on PCIE_LAYERSCAPE || PCIE_LAYERSCAPE_GEN4
+       depends on PCIE_LAYERSCAPE_RC || PCIE_LAYERSCAPE_GEN4
        default "fsl,lx2160a-pcie-ep" if ARCH_LX2160A
        default "fsl,ls-pcie-ep"
        help
@@ -174,6 +228,13 @@ config PCIE_INTEL_FPGA
          Say Y here if you want to enable PCIe controller support on Intel
          FPGA, example Stratix 10.
 
+config PCIE_IPROC
+       bool "Iproc PCIe support"
+       depends on DM_PCI
+       help
+         Broadcom iProc PCIe controller driver.
+         Say Y here if you want to enable Broadcom iProc PCIe controller,
+
 config PCI_MVEBU
        bool "Enable Armada XP/38x PCIe driver"
        depends on ARCH_MVEBU
@@ -200,9 +261,19 @@ config PCIE_MEDIATEK
 config PCIE_ROCKCHIP
        bool "Enable Rockchip PCIe driver"
        select DM_PCI
+       select PHY_ROCKCHIP_PCIE
        default y if ROCKCHIP_RK3399
        help
          Say Y here if you want to enable PCIe controller support on
          Rockchip SoCs.
 
+config PCI_BRCMSTB
+       bool "Broadcom STB PCIe controller"
+       depends on DM_PCI
+       depends on ARCH_BCM283X
+       help
+         Say Y here if you want to enable support for PCIe controller
+         on Broadcom set-top-box (STB) SoCs.
+         This driver currently supports only BCM2711 SoC and RC mode
+         of the controller.
 endif