miiphy: convert to linux/mii.h

[platform/kernel/u-boot.git] / drivers / net / designware.c

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 2f923f2..3f5eeb7 100644 (file)
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -318,19 +318,19 @@ static int find_phy(struct eth_device *dev)
        u16 ctrl, oldctrl;
 
        do {
-               eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
-               oldctrl = ctrl & PHY_BMCR_AUTON;
+               eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+               oldctrl = ctrl & BMCR_ANENABLE;
 
-               ctrl ^= PHY_BMCR_AUTON;
-               eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
-               eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
-               ctrl &= PHY_BMCR_AUTON;
+               ctrl ^= BMCR_ANENABLE;
+               eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
+               eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+               ctrl &= BMCR_ANENABLE;
 
                if (ctrl == oldctrl) {
                        phy_addr++;
                } else {
-                       ctrl ^= PHY_BMCR_AUTON;
-                       eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+                       ctrl ^= BMCR_ANENABLE;
+                       eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
 
                        return phy_addr;
                }
@@ -347,10 +347,10 @@ static int dw_reset_phy(struct eth_device *dev)
        int timeout = CONFIG_PHYRESET_TIMEOUT;
        u32 phy_addr = priv->address;
 
-       eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+       eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
        do {
-               eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
-               if (!(ctrl & PHY_BMCR_RESET))
+               eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+               if (!(ctrl & BMCR_RESET))
                        break;
                udelay(1000);
        } while (timeout--);
@@ -386,33 +386,33 @@ static int configure_phy(struct eth_device *dev)
                return -1;
 
 #if defined(CONFIG_DW_AUTONEG)
-       bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
-              PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
+       bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
+              BMCR_FULLDPLX | BMCR_SPEED1000;
 #else
-       bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
+       bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
 
 #if defined(CONFIG_DW_SPEED10M)
-       bmcr &= ~PHY_BMCR_100MB;
+       bmcr &= ~BMCR_SPEED100;
 #endif
 #if defined(CONFIG_DW_DUPLEXHALF)
-       bmcr &= ~PHY_BMCR_DPLX;
+       bmcr &= ~BMCR_FULLDPLX;
 #endif
 #endif
-       if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
+       if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
                return -1;
 
        /* Read the phy status register and populate priv structure */
 #if defined(CONFIG_DW_AUTONEG)
        timeout = CONFIG_AUTONEG_TIMEOUT;
        do {
-               eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
-               if (bmsr & PHY_BMSR_AUTN_COMP)
+               eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
+               if (bmsr & BMSR_ANEGCOMPLETE)
                        break;
                udelay(1000);
        } while (timeout--);
 
-       eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
-       eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
+       eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
+       eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
 
        if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
                priv->speed = SPEED_1000M;
@@ -421,28 +421,28 @@ static int configure_phy(struct eth_device *dev)
                else
                        priv->duplex = HALF_DUPLEX;
        } else {
-               if (anlpar & PHY_ANLPAR_100)
+               if (anlpar & LPA_100)
                        priv->speed = SPEED_100M;
                else
                        priv->speed = SPEED_10M;
 
-               if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+               if (anlpar & (LPA_10FULL | LPA_100FULL))
                        priv->duplex = FULL_DUPLEX;
                else
                        priv->duplex = HALF_DUPLEX;
        }
 #else
-       if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
+       if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
                return -1;
 
-       if (ctrl & PHY_BMCR_DPLX)
+       if (ctrl & BMCR_FULLDPLX)
                priv->duplex = FULL_DUPLEX;
        else
                priv->duplex = HALF_DUPLEX;
 
-       if (ctrl & PHY_BMCR_1000_MBPS)
+       if (ctrl & BMCR_SPEED1000)
                priv->speed = SPEED_1000M;
-       else if (ctrl & PHY_BMCR_100_MBPS)
+       else if (ctrl & BMCR_SPEED100)
                priv->speed = SPEED_100M;
        else
                priv->speed = SPEED_10M;