source "drivers/net/phy/Kconfig"
source "drivers/net/pfe_eth/Kconfig"
source "drivers/net/fsl-mc/Kconfig"
+source "drivers/net/bnxt/Kconfig"
config ETH
def_bool y
This driver supports the XGMAC in Calxeda Highbank and Midway
machines.
+config DRIVER_DM9000
+ bool "Davicom DM9000 controller driver"
+ help
+ The Davicom DM9000 parallel bus external ethernet interface chip.
+
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
depends on DM_ETH
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
+ depends on PCI
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
+config E1000_NO_NVM
+ bool "Intel PRO/1000 has no NVMEM / EEPROM"
+ depends on E1000
+
config E1000_SPI_GENERIC
bool "Allow access to the Intel 8257x SPI bus"
depends on E1000
config ETH_DESIGNWARE_SOCFPGA
select REGMAP
select SYSCON
+ select DW_ALTDESCRIPTOR
bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
depends on DM_ETH && ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
present on Actions S700 SoC.
+config DW_ALTDESCRIPTOR
+ bool "Designware Ethernet MAC uses alternate (enhanced) descriptors"
+ depends on ETH_DESIGNWARE
+
config ETHOC
bool "OpenCores 10/100 Mbps Ethernet MAC"
help
config FEC_MXC
bool "FEC Ethernet controller"
- depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || VF610
+ depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX93 || VF610
help
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
config FMAN_ENET
bool "Freescale FMan ethernet support"
depends on ARM || PPC
+ select SYS_FMAN_V3 if ARCH_B4420 || ARCH_B4860 || ARCH_LS1043A || \
+ ARCH_LS1046A || ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || \
+ ARCH_T2080 || ARCH_T4240
help
This driver support the Freescale FMan Ethernet controller
depends on FMAN_ENET || QE || U_QE
default 0x10000
+config SYS_FMAN_V3
+ bool
+ select FSL_MEMAC
+ help
+ SoC has FMan v3 with mEMAC
+
config FTMAC100
bool "Ftmac100 Ethernet Support"
help
offers high-priority transmit queue for QoS and CoS
applications.
+config SYS_DISCOVER_PHY
+ bool
config MCFFEC
bool "ColdFire Ethernet Support"
depends on DM_ETH
select PHYLIB
+ select SYS_DISCOVER_PHY
help
This driver supports the network interface units in the
ColdFire family.
+config SYS_UNIFY_CACHE
+ depends on MCFFEC
+ bool "Invalidate icache during ethernet operations"
+
config FSLDMAFEC
bool "ColdFire DMA Ethernet Support"
depends on DM_ETH
select PHYLIB
+ select SYS_DISCOVER_PHY
help
This driver supports the network interface units in the
ColdFire family.
This driver implements a DSA switch driver for the KSZ9477 family
of GbE switches using the I2C interface.
+config LPC32XX_ETH
+ bool "LPC32xx Ethernet MAC interface driver"
+ depends on ARCH_LPC32XX
+ default y
+
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
depends on ARCH_KIRKWOOD || ARCH_ORION5X
bool "Marvell Armada XP/385/3700 network interface support"
depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
select PHYLIB
+ select DM_MDIO
help
This driver supports the network interface units in the
Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
config MACB
bool "Cadence MACB/GEM Ethernet Interface"
- depends on DM_ETH
select PHYLIB
help
The Cadence MACB ethernet interface is found on many Atmel
The MediaTek MT7628 ethernet interface is used on MT7628 and
MT7688 based boards.
+config NET_NPCM750
+ bool "Nuvoton NPCM750 Ethernet MAC"
+ help
+ support NPCM750 EMAC
+
+config NET_OCTEON
+ bool "MIPS Octeon ethernet support"
+ depends on ARCH_OCTEON
+ help
+ You must select Y to enable network device support for
+ MIPS Octeon SoCs. If unsure, say n
+
config NET_OCTEONTX
bool "OcteonTX Ethernet support"
depends on ARCH_OCTEONTX
help
Enable support of the Media-Independent Interface (MII)
+config RMII
+ bool "Enable RMII"
+ help
+ Enable support of the Reduced Media-Independent Interface (MII)
+
config PCNET
bool "AMD PCnet series Ethernet controller driver"
help
This driver supports Realtek 8169 series gigabit ethernet family of
PCI/PCIe chipsets/adapters.
+config SJA1105
+ bool "NXP SJA1105 Ethernet switch family driver"
+ depends on DM_DSA && DM_SPI
+ select BITREVERSE
+ help
+ This is the driver for the NXP SJA1105 automotive Ethernet switch
+ family. These are 5-port devices and are managed over an SPI
+ interface. Probing is handled based on OF bindings. The driver
+ supports the following revisions:
+ - SJA1105E (Gen. 1, No TT-Ethernet)
+ - SJA1105T (Gen. 1, TT-Ethernet)
+ - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
+ - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
+ - SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
+ - SJA1105S (Gen. 2, SGMII, TT-Ethernet)
+
config SMC911X
bool "SMSC LAN911x and LAN921x controller driver"
config MPC8XX_FEC
bool "Fast Ethernet Controller on MPC8XX"
depends on MPC8xx
+ depends on DM_ETH
select MII
+ select SYS_DISCOVER_PHY
help
This driver implements support for the Fast Ethernet Controller
on MPC8XX
help
QBman fixups to allow deep sleep in DPAA 1 SOCs
+config SYS_FSL_QMAN_V3
+ bool # QMAN version 3
+ depends on SYS_DPAA_QBMAN
+
config TSEC_ENET
select PHYLIB
bool "Enable Three-Speed Ethernet Controller"
This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
on the mEMAC (which supports both Clauses 22 and 45).
+config ASPEED_MDIO
+ bool "Aspeed MDIO interface support"
+ depends on DM_MDIO
+ help
+ This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver
+ currently supports Clause 22.
+
config MDIO_MUX_MMIOREG
bool "MDIO MUX accessed as a MMIO register access"
depends on DM_MDIO_MUX
projects / platform / kernel / u-boot.git / blobdiff