This driver is used for testing in test/dm/mdio.c
+config DM_ETH_PHY
+ bool "Enable Driver Model for Ethernet Generic PHY drivers"
+ depends on DM
+ help
+ Enable driver model for Ethernet Generic PHY .
+
menuconfig NETDEVICES
bool "Network device support"
depends on NET
help
This driver supports the Synopsys Designware Ethernet QOS (Quality
Of Service) IP block. The IP supports many options for bus type,
- clocking/reset structure, and feature list. This driver currently
- supports the specific configuration used in NVIDIA's Tegra186 chip,
- but should be extensible to other combinations quite easily.
+ clocking/reset structure, and feature list.
+
+config DWC_ETH_QOS_IMX
+ bool "Synopsys DWC Ethernet QOS device support for IMX"
+ depends on DWC_ETH_QOS
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in IMX soc.
+
+config DWC_ETH_QOS_STM32
+ bool "Synopsys DWC Ethernet QOS device support for STM32"
+ depends on DWC_ETH_QOS
+ default y if ARCH_STM32MP
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in STM32MP soc.
+
+config DWC_ETH_QOS_TEGRA186
+ bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
+ depends on DWC_ETH_QOS
+ default y if TEGRA186
+ help
+ The Synopsys Designware Ethernet QOS IP block with specific
+ configuration used in NVIDIA's Tegra186 chip.
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
+ depends on (DM_ETH && DM_PCI) || !DM_ETH
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
used on devices with SPI support you can reprogram the EEPROM from
U-Boot.
+config EEPRO100
+ bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
+ help
+ This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
+ ethernet family of adapters.
+
config ETH_SANDBOX
depends on DM_ETH && SANDBOX
default y
Altera system manager to correctly interface with the PHY.
This code handles those SoC specifics.
+config ETH_DESIGNWARE_S700
+ bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
+ depends on DM_ETH && ETH_DESIGNWARE
+ help
+ This provides glue layer to use Synopsys Designware Ethernet MAC
+ present on Actions S700 SoC.
+
config ETHOC
bool "OpenCores 10/100 Mbps Ethernet MAC"
help
This driver supports the network interface units in the
ColdFire family.
+config KS8851_MLL
+ bool "Microchip KS8851-MLL controller driver"
+ help
+ The Microchip KS8851 parallel bus external ethernet interface chip.
+
+if KS8851_MLL
+if !DM_ETH
+config KS8851_MLL_BASEADDR
+ hex "Microchip KS8851-MLL Base Address"
+ help
+ Define this to hold the physical address of the device (I/O space)
+endif #DM_ETH
+endif #KS8851_MLL
+
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
- depends on KIRKWOOD || ORION5X
+ depends on ARCH_KIRKWOOD || ARCH_ORION5X
select PHYLIB if DM_ETH
help
This driver supports the network interface units in the
help
Enable support of the Media-Independent Interface (MII)
+config PCNET
+ bool "AMD PCnet series Ethernet controller driver"
+ help
+ This driver supports AMD PCnet series fast ethernet family of
+ PCI chipsets/adapters.
+
config RTL8139
bool "Realtek 8139 series Ethernet controller driver"
help
source "drivers/net/ti/Kconfig"
+config TULIP
+ bool "DEC Tulip DC2114x Ethernet support"
+ depends on (DM_ETH && DM_PCI) || !DM_ETH
+ help
+ This driver supports DEC DC2114x Fast ethernet chips.
+
config XILINX_AXIEMAC
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx AXI Ethernet"
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config XILINX_EMACLITE
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
+ depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config ZYNQ_GEM
- depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
+ depends on DM_ETH
select PHYLIB
bool "Xilinx Ethernet GEM"
help