source "drivers/net/phy/Kconfig"
source "drivers/net/pfe_eth/Kconfig"
+source "drivers/net/fsl-mc/Kconfig"
config DM_ETH
bool "Enable Driver Model for Ethernet drivers"
This driver is used for testing in test/dm/mdio.c
+config DM_ETH_PHY
+ bool "Enable Driver Model for Ethernet Generic PHY drivers"
+ depends on DM
+ help
+ Enable driver model for Ethernet Generic PHY .
+
menuconfig NETDEVICES
bool "Network device support"
depends on NET
help
This driver supports the BCM6368 Ethernet MAC.
+config BCMGENET
+ bool "BCMGENET V5 support"
+ depends on DM_ETH
+ select PHYLIB
+ help
+ This driver supports the BCMGENET Ethernet MAC.
+
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
depends on DM_ETH
help
This driver supports the Synopsys Designware Ethernet QOS (Quality
Of Service) IP block. The IP supports many options for bus type,
- clocking/reset structure, and feature list. This driver currently
- supports the specific configuration used in NVIDIA's Tegra186 chip,
- but should be extensible to other combinations quite easily.
+ clocking/reset structure, and feature list.
+
+config DWC_ETH_QOS_IMX
+ bool "Synopsys DWC Ethernet QOS device support for IMX"
+ depends on DWC_ETH_QOS
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in IMX soc.
+
+config DWC_ETH_QOS_STM32
+ bool "Synopsys DWC Ethernet QOS device support for STM32"
+ depends on DWC_ETH_QOS
+ default y if ARCH_STM32MP
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in STM32MP soc.
+
+config DWC_ETH_QOS_TEGRA186
+ bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
+ depends on DWC_ETH_QOS
+ default y if TEGRA186
+ help
+ The Synopsys Designware Ethernet QOS IP block with specific
+ configuration used in NVIDIA's Tegra186 chip.
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
+ depends on (DM_ETH && DM_PCI) || !DM_ETH
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
used on devices with SPI support you can reprogram the EEPROM from
U-Boot.
+config EEPRO100
+ bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
+ help
+ This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
+ ethernet family of adapters.
+
config ETH_SANDBOX
depends on DM_ETH && SANDBOX
default y
Altera system manager to correctly interface with the PHY.
This code handles those SoC specifics.
+config ETH_DESIGNWARE_S700
+ bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
+ depends on DM_ETH && ETH_DESIGNWARE
+ help
+ This provides glue layer to use Synopsys Designware Ethernet MAC
+ present on Actions S700 SoC.
+
config ETHOC
bool "OpenCores 10/100 Mbps Ethernet MAC"
help
config FEC_MXC
bool "FEC Ethernet controller"
- depends on MX28 || MX5 || MX6 || MX7 || IMX8 || VF610
+ depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
help
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
applications.
+config MCFFEC
+ bool "ColdFire Ethernet Support"
+ depends on DM_ETH
+ select PHYLIB
+ help
+ This driver supports the network interface units in the
+ ColdFire family.
+
+config FSLDMAFEC
+ bool "ColdFire DMA Ethernet Support"
+ depends on DM_ETH
+ select PHYLIB
+ help
+ This driver supports the network interface units in the
+ ColdFire family.
+
+config KS8851_MLL
+ bool "Microchip KS8851-MLL controller driver"
+ help
+ The Microchip KS8851 parallel bus external ethernet interface chip.
+
+if KS8851_MLL
+if !DM_ETH
+config KS8851_MLL_BASEADDR
+ hex "Microchip KS8851-MLL Base Address"
+ help
+ Define this to hold the physical address of the device (I/O space)
+endif #DM_ETH
+endif #KS8851_MLL
+
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
- depends on KIRKWOOD || ORION5X
+ depends on ARCH_KIRKWOOD || ARCH_ORION5X
select PHYLIB if DM_ETH
help
This driver supports the network interface units in the
bool "Marvell Armada 375/7K/8K network interface support"
depends on ARMADA_375 || ARMADA_8K
select PHYLIB
+ select MVMDIO
+ select DM_MDIO
help
This driver supports the network interface units in the
Marvell ARMADA 375, 7K and 8K SoCs.
config MT7628_ETH
bool "MediaTek MT7628 Ethernet Interface"
depends on SOC_MT7628
+ select PHYLIB
help
The MediaTek MT7628 ethernet interface is used on MT7628 and
MT7688 based boards.
help
Enable support of the Media-Independent Interface (MII)
+config PCNET
+ bool "AMD PCnet series Ethernet controller driver"
+ help
+ This driver supports AMD PCnet series fast ethernet family of
+ PCI chipsets/adapters.
+
config RTL8139
bool "Realtek 8139 series Ethernet controller driver"
help
if SMC911X
+if !DM_ETH
config SMC911X_BASE
hex "SMC911X Base Address"
help
Define this to hold the physical address
of the device (I/O space)
+endif #DM_ETH
choice
prompt "SMC911X bus width"
source "drivers/net/ti/Kconfig"
+config TULIP
+ bool "DEC Tulip DC2114x Ethernet support"
+ depends on (DM_ETH && DM_PCI) || !DM_ETH
+ help
+ This driver supports DEC DC2114x Fast ethernet chips.
+
config XILINX_AXIEMAC
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx AXI Ethernet"
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config XILINX_EMACLITE
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
+ depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config ZYNQ_GEM
- depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
+ depends on DM_ETH
select PHYLIB
bool "Xilinx Ethernet GEM"
help
an I2C chip. The board it was developed for uses a mux controlled by
on-board FPGA which in turn is accessed as a chip over I2C.
+config MVMDIO
+ bool "Marvell MDIO interface support"
+ depends on DM_MDIO
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
+ Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
+
+ This driver is used by the MVPP2 and MVNETA drivers.
+
+config FSL_LS_MDIO
+ bool "NXP Layerscape MDIO interface support"
+ depends on DM_MDIO
+ help
+ This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
+ on the mEMAC (which supports both Clauses 22 and 45).
+
endif # NETDEVICES