+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* SPI flash internal definitions
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SF_INTERNAL_H_
#define _SF_INTERNAL_H_
+#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/compiler.h>
-/* Dual SPI flash memories - see SPI_COMM_DUAL_... */
-enum spi_dual_flash {
- SF_SINGLE_FLASH = 0,
- SF_DUAL_STACKED_FLASH = 1 << 0,
- SF_DUAL_PARALLEL_FLASH = 1 << 1,
-};
-
-/* Enum list - Full read commands */
-enum spi_read_cmds {
- ARRAY_SLOW = 1 << 0,
- ARRAY_FAST = 1 << 1,
- DUAL_OUTPUT_FAST = 1 << 2,
- DUAL_IO_FAST = 1 << 3,
- QUAD_OUTPUT_FAST = 1 << 4,
- QUAD_IO_FAST = 1 << 5,
-};
-
-/* Normal - Extended - Full command set */
-#define RD_NORM (ARRAY_SLOW | ARRAY_FAST)
-#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
-#define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
-
-/* sf param flags */
-enum {
-#ifdef CONFIG_SPI_FLASH_USE_4K_SECTORS
- SECT_4K = 1 << 0,
-#else
- SECT_4K = 0 << 0,
-#endif
- SECT_32K = 1 << 1,
- E_FSR = 1 << 2,
- SST_BP = 1 << 3,
- SST_WP = 1 << 4,
- WR_QPP = 1 << 5,
-};
-
-#define SST_WR (SST_BP | SST_WP)
-
-enum spi_nor_option_flags {
- SNOR_F_SST_WR = (1 << 0),
- SNOR_F_USE_FSR = (1 << 1),
-};
-
-#define SPI_FLASH_3B_ADDR_LEN 3
-#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
-#define SPI_FLASH_16MB_BOUN 0x1000000
-
-/* CFI Manufacture ID's */
-#define SPI_FLASH_CFI_MFR_SPANSION 0x01
-#define SPI_FLASH_CFI_MFR_STMICRO 0x20
-#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2
-#define SPI_FLASH_CFI_MFR_WINBOND 0xef
+#define SPI_NOR_MAX_ID_LEN 6
+#define SPI_NOR_MAX_ADDR_WIDTH 4
-/* Erase commands */
-#define CMD_ERASE_4K 0x20
-#define CMD_ERASE_32K 0x52
-#define CMD_ERASE_CHIP 0xc7
-#define CMD_ERASE_64K 0xd8
-
-/* Write commands */
-#define CMD_WRITE_STATUS 0x01
-#define CMD_PAGE_PROGRAM 0x02
-#define CMD_WRITE_DISABLE 0x04
-#define CMD_READ_STATUS 0x05
-#define CMD_QUAD_PAGE_PROGRAM 0x32
-#define CMD_READ_STATUS1 0x35
-#define CMD_WRITE_ENABLE 0x06
-#define CMD_READ_CONFIG 0x35
-#define CMD_FLAG_STATUS 0x70
-
-/* Read commands */
-#define CMD_READ_ARRAY_SLOW 0x03
-#define CMD_READ_ARRAY_FAST 0x0b
-#define CMD_READ_DUAL_OUTPUT_FAST 0x3b
-#define CMD_READ_DUAL_IO_FAST 0xbb
-#define CMD_READ_QUAD_OUTPUT_FAST 0x6b
-#define CMD_READ_QUAD_IO_FAST 0xeb
-#define CMD_READ_ID 0x9f
-
-/* Bank addr access commands */
-#ifdef CONFIG_SPI_FLASH_BAR
-# define CMD_BANKADDR_BRWR 0x17
-# define CMD_BANKADDR_BRRD 0x16
-# define CMD_EXTNADDR_WREAR 0xC5
-# define CMD_EXTNADDR_RDEAR 0xC8
+struct flash_info {
+#if !CONFIG_IS_ENABLED(SPI_FLASH_TINY)
+ char *name;
#endif
-/* Common status */
-#define STATUS_WIP (1 << 0)
-#define STATUS_QEB_WINSPAN (1 << 1)
-#define STATUS_QEB_MXIC (1 << 6)
-#define STATUS_PEC (1 << 7)
-#define SR_BP0 BIT(2) /* Block protect 0 */
-#define SR_BP1 BIT(3) /* Block protect 1 */
-#define SR_BP2 BIT(4) /* Block protect 2 */
-
-/* Flash timeout values */
-#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
-
-/* SST specific */
-#ifdef CONFIG_SPI_FLASH_SST
-# define CMD_SST_BP 0x02 /* Byte Program */
-# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
-
-int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
-int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
-#endif
-
-/**
- * struct spi_flash_params - SPI/QSPI flash device params structure
- *
- * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
- * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
- * @ext_jedec: Device ext_jedec ID
- * @sector_size: Isn't necessarily a sector size from vendor,
- * the size listed here is what works with CMD_ERASE_64K
- * @nr_sectors: No.of sectors on this device
- * @e_rd_cmd: Enum list for read commands
- * @flags: Important param, for flash specific behaviour
- */
-struct spi_flash_params {
- const char *name;
- u32 jedec;
- u16 ext_jedec;
- u32 sector_size;
- u32 nr_sectors;
- u8 e_rd_cmd;
- u16 flags;
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+
+ /* The size listed here is what works with SPINOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned int sector_size;
+ u16 n_sectors;
+
+ u16 page_size;
+ u16 addr_width;
+
+ u32 flags;
+#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
+#define SST_WRITE BIT(2) /* use SST byte programming */
+#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
+#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
+#define USE_FSR BIT(7) /* use flag status register */
+#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
+#define SPI_NOR_HAS_TB BIT(9) /*
+ * Flash SR has Top/Bottom (TB) protect
+ * bit. Must be used with
+ * SPI_NOR_HAS_LOCK.
+ */
+#define SPI_S3AN BIT(10) /*
+ * Xilinx Spartan 3AN In-System Flash
+ * (MFR cannot be used for probing
+ * because it has the same value as
+ * ATMEL flashes)
+ */
+#define SPI_NOR_4B_OPCODES BIT(11) /*
+ * Use dedicated 4byte address op codes
+ * to support memory size above 128Mib.
+ */
+#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
+#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
+#define USE_CLSR BIT(14) /* use CLSR command */
+#define SPI_NOR_HAS_SST26LOCK BIT(15) /* Flash supports lock/unlock via BPR */
+#define SPI_NOR_OCTAL_READ BIT(16) /* Flash supports Octal Read */
};
-extern const struct spi_flash_params spi_flash_params_table[];
-
-/* Send a single-byte command to the device and read the response */
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
-
-/*
- * Send a multi-byte command to the device and read the response. Used
- * for flash array reads, etc.
- */
-int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
-
-/*
- * Send a multi-byte command to the device followed by (optional)
- * data. Used for programming the flash array, etc.
- */
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
- const void *data, size_t data_len);
-
-
-/* Flash erase(sectors) operation, support all possible erase commands */
-int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
-
-/* Read the status register */
-int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs);
-
-/* Program the status register */
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws);
-
-/* Lock stmicro spi flash region */
-int stm_lock(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Unlock stmicro spi flash region */
-int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Check if a stmicro spi flash region is completely locked */
-int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Read the config register */
-int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc);
-
-/* Program the config register */
-int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);
+extern const struct flash_info spi_nor_ids[];
-/* Enable writing on the SPI flash */
-static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
-{
- return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
-}
+#define JEDEC_MFR(info) ((info)->id[0])
+#define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2]))
-/* Disable writing on the SPI flash */
-static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
-{
- return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
-}
+/* Get software write-protect value (BP bits) */
+int spi_flash_cmd_get_sw_write_prot(struct spi_flash *flash);
-/*
- * Send the read status command to the device and wait for the wip
- * (write-in-progress) bit to clear itself.
- */
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
-/*
- * Used for spi_flash write operation
- * - SPI claim
- * - spi_flash_cmd_write_enable
- * - spi_flash_cmd_write
- * - spi_flash_cmd_wait_ready
- * - SPI release
- */
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, const void *buf, size_t buf_len);
-
-/*
- * Flash write operation, support all possible write commands.
- * Write the requested data out breaking it up into multiple write
- * commands as needed per the write size.
- */
-int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf);
-
-/*
- * Same as spi_flash_cmd_read() except it also claims/releases the SPI
- * bus. Used as common part of the ->read() operation.
- */
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
-
-/* Flash read operation, support all possible read commands */
-int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
- size_t len, void *data);
-
-#ifdef CONFIG_SPI_FLASH_MTD
+#if CONFIG_IS_ENABLED(SPI_FLASH_MTD)
int spi_flash_mtd_register(struct spi_flash *flash);
void spi_flash_mtd_unregister(void);
#endif
-
#endif /* _SF_INTERNAL_H_ */
projects / platform / kernel / u-boot.git / blobdiff