Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig

[platform/kernel/u-boot.git] / drivers / mtd / Kconfig

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 04ae456..af45ef0 100644 (file)
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -119,6 +119,13 @@ config SYS_FLASH_EMPTY_INFO
        bool "Enable displaying empty sectors in flash info"
        depends on FLASH_CFI_DRIVER
 
+config FLASH_SPANSION_S29WS_N
+       bool "Non-standard s29ws-n MirrorBit flash"
+       depends on FLASH_CFI_DRIVER
+       help
+         Enable this if the s29ws-n MirrorBit flash has non-standard addresses
+         for buffered write commands.
+
 config FLASH_CFI_MTD
        bool "Enable CFI MTD driver"
        depends on FLASH_CFI_DRIVER
@@ -156,6 +163,18 @@ config SYS_FLASH_CHECKSUM
          If the variable flashchecksum is set in the environment, perform a CRC
          of the flash and print the value to console.
 
+config FLASH_VERIFY
+       bool "Compare writes to NOR flash with source location"
+       depends on MTD_NOR_FLASH
+       help
+         If enabled, the content of the flash (destination) is compared
+         against the source after the write operation. An error message will
+         be printed when the contents are not identical.  Please note that
+         this option is useless in nearly all cases, since such flash
+         programming errors usually are detected earlier while
+         unprotecting/erasing/programming. Please only enable this option if
+         you really know what you are doing.
+
 config ALTERA_QSPI
        bool "Altera Generic Quad SPI Controller"
        depends on DM_MTD