// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#include <common.h>
#include <clk.h>
+#include <cpu_func.h>
#include <dm.h>
#include <fdtdec.h>
+#include <log.h>
+#include <malloc.h>
+#include <asm/bitops.h>
+#include <asm/cache.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/libfdt.h>
#include <mmc.h>
#include <reset.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <linux/iopoll.h>
+#include <watchdog.h>
struct stm32_sdmmc2_plat {
struct mmc_config cfg;
#define SDMMC_IDMACTRL_IDMAEN BIT(0)
#define SDMMC_CMD_TIMEOUT 0xFFFFFFFF
+#define SDMMC_BUSYD0END_TIMEOUT_US 2000000
static void stm32_sdmmc2_start_data(struct stm32_sdmmc2_priv *priv,
struct mmc_data *data,
idmabase0 = (u32)data->src;
}
- /* Set the SDMMC Data TimeOut value */
- writel(SDMMC_CMD_TIMEOUT, priv->base + SDMMC_DTIMER);
-
/* Set the SDMMC DataLength value */
writel(ctx->data_length, priv->base + SDMMC_DLEN);
}
static void stm32_sdmmc2_start_cmd(struct stm32_sdmmc2_priv *priv,
- struct mmc_cmd *cmd, u32 cmd_param)
+ struct mmc_cmd *cmd, u32 cmd_param,
+ struct stm32_sdmmc2_ctx *ctx)
{
+ u32 timeout = 0;
+
if (readl(priv->base + SDMMC_CMD) & SDMMC_CMD_CPSMEN)
writel(0, priv->base + SDMMC_CMD);
cmd_param |= SDMMC_CMD_WAITRESP_1;
}
+ /*
+ * SDMMC_DTIME must be set in two case:
+ * - on data transfert.
+ * - on busy request.
+ * If not done or too short, the dtimeout flag occurs and DPSM stays
+ * enabled/busy and waits for abort (stop transmission cmd).
+ * Next data command is not possible whereas DPSM is activated.
+ */
+ if (ctx->data_length) {
+ timeout = SDMMC_CMD_TIMEOUT;
+ } else {
+ writel(0, priv->base + SDMMC_DCTRL);
+
+ if (cmd->resp_type & MMC_RSP_BUSY)
+ timeout = SDMMC_CMD_TIMEOUT;
+ }
+
+ /* Set the SDMMC Data TimeOut value */
+ writel(timeout, priv->base + SDMMC_DTIMER);
+
/* Clear flags */
writel(SDMMC_ICR_STATIC_FLAGS, priv->base + SDMMC_ICR);
cmd->response[2] = readl(priv->base + SDMMC_RESP3);
cmd->response[3] = readl(priv->base + SDMMC_RESP4);
}
+
+ /* Wait for BUSYD0END flag if busy status is detected */
+ if (cmd->resp_type & MMC_RSP_BUSY &&
+ status & SDMMC_STA_BUSYD0) {
+ mask = SDMMC_STA_DTIMEOUT | SDMMC_STA_BUSYD0END;
+
+ /* Polling status register */
+ ret = readl_poll_timeout(priv->base + SDMMC_STA,
+ status, status & mask,
+ SDMMC_BUSYD0END_TIMEOUT_US);
+
+ if (ret < 0) {
+ debug("%s: timeout reading SDMMC_STA\n",
+ __func__);
+ ctx->dpsm_abort = true;
+ return ret;
+ }
+
+ if (status & SDMMC_STA_DTIMEOUT) {
+ debug("%s: error SDMMC_STA_DTIMEOUT (0x%x)\n",
+ __func__, status);
+ ctx->dpsm_abort = true;
+ return -ETIMEDOUT;
+ }
+ }
}
return 0;
u32 cmdat = data ? SDMMC_CMD_CMDTRANS : 0;
int ret, retry = 3;
+ WATCHDOG_RESET();
+
retry_cmd:
ctx.data_length = 0;
ctx.dpsm_abort = false;
stm32_sdmmc2_start_data(priv, data, &ctx);
}
- stm32_sdmmc2_start_cmd(priv, cmd, cmdat);
+ stm32_sdmmc2_start_cmd(priv, cmd, cmdat, &ctx);
debug("%s: send cmd %d data: 0x%x @ 0x%x\n",
__func__, cmd->cmdidx,
debug("%s: send STOP command to abort dpsm treatments\n",
__func__);
- stm32_sdmmc2_start_cmd(priv, &stop_cmd, SDMMC_CMD_CMDSTOP);
+ ctx.data_length = 0;
+
+ stm32_sdmmc2_start_cmd(priv, &stop_cmd,
+ SDMMC_CMD_CMDSTOP, &ctx);
stm32_sdmmc2_end_cmd(priv, &stop_cmd, &ctx);
writel(SDMMC_ICR_STATIC_FLAGS, priv->base + SDMMC_ICR);
return;
stm32_sdmmc2_reset(priv);
- writel(SDMMC_POWER_PWRCTRL_CYCLE | priv->pwr_reg_msk,
- priv->base + SDMMC_POWER);
}
/*
return 1;
}
+static int stm32_sdmmc2_host_power_cycle(struct udevice *dev)
+{
+ struct stm32_sdmmc2_priv *priv = dev_get_priv(dev);
+
+ writel(SDMMC_POWER_PWRCTRL_CYCLE | priv->pwr_reg_msk,
+ priv->base + SDMMC_POWER);
+
+ return 0;
+}
+
static const struct dm_mmc_ops stm32_sdmmc2_ops = {
.send_cmd = stm32_sdmmc2_send_cmd,
.set_ios = stm32_sdmmc2_set_ios,
.get_cd = stm32_sdmmc2_getcd,
+ .host_power_cycle = stm32_sdmmc2_host_power_cycle,
};
static int stm32_sdmmc2_probe(struct udevice *dev)
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
- if (dev_read_bool(dev, "st,negedge"))
+ if (dev_read_bool(dev, "st,neg-edge"))
priv->clk_reg_msk |= SDMMC_CLKCR_NEGEDGE;
- if (dev_read_bool(dev, "st,dirpol"))
+ if (dev_read_bool(dev, "st,sig-dir"))
priv->pwr_reg_msk |= SDMMC_POWER_DIRPOL;
- if (dev_read_bool(dev, "st,pin-ckin"))
+ if (dev_read_bool(dev, "st,use-ckin"))
priv->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN;
ret = clk_get_by_index(dev, 0, &priv->clk);
GPIOD_IS_IN);
cfg->f_min = 400000;
- cfg->f_max = dev_read_u32_default(dev, "max-frequency", 52000000);
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
- cfg->name = "STM32 SDMMC2";
+ cfg->name = "STM32 SD/MMC";
cfg->host_caps = 0;
- if (cfg->f_max > 25000000)
- cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-
- switch (dev_read_u32_default(dev, "bus-width", 1)) {
- case 8:
- cfg->host_caps |= MMC_MODE_8BIT;
- case 4:
- cfg->host_caps |= MMC_MODE_4BIT;
- break;
- case 1:
- break;
- default:
- pr_err("invalid \"bus-width\" property, force to 1\n");
- }
+ cfg->f_max = 52000000;
+ mmc_of_parse(dev, cfg);
upriv->mmc = &plat->mmc;
return ret;
}
-int stm32_sdmmc_bind(struct udevice *dev)
+static int stm32_sdmmc_bind(struct udevice *dev)
{
struct stm32_sdmmc2_plat *plat = dev_get_platdata(dev);