#include <cpu_func.h>
#include <dm.h>
#include <errno.h>
+#include <log.h>
#include <malloc.h>
#include <mmc.h>
#include <sdhci.h>
-#include <dm.h>
+#include <asm/cache.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <phys2bus.h>
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
mmc_get_dma_dir(data));
if (host->flags & USE_SDMA) {
- sdhci_writel(host, host->start_addr, SDHCI_DMA_ADDRESS);
+ sdhci_writel(host, phys_to_bus((ulong)host->start_addr),
+ SDHCI_DMA_ADDRESS);
} else if (host->flags & (USE_ADMA | USE_ADMA64)) {
sdhci_prepare_adma_table(host, data);
start_addr &=
~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
- sdhci_writel(host, start_addr,
+ sdhci_writel(host, phys_to_bus((ulong)start_addr),
SDHCI_DMA_ADDRESS);
}
}
#endif
u32 ctrl;
struct sdhci_host *host = mmc->priv;
+ bool no_hispd_bit = false;
if (host->ops && host->ops->set_control_reg)
host->ops->set_control_reg(host);
ctrl &= ~SDHCI_CTRL_4BITBUS;
}
- if (mmc->clock > 26000000)
- ctrl |= SDHCI_CTRL_HISPD;
- else
- ctrl &= ~SDHCI_CTRL_HISPD;
-
if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) ||
- (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE))
+ (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE)) {
ctrl &= ~SDHCI_CTRL_HISPD;
+ no_hispd_bit = true;
+ }
+
+ if (!no_hispd_bit) {
+ if (mmc->selected_mode == MMC_HS ||
+ mmc->selected_mode == SD_HS ||
+ mmc->selected_mode == MMC_DDR_52 ||
+ mmc->selected_mode == MMC_HS_200 ||
+ mmc->selected_mode == MMC_HS_400 ||
+ mmc->selected_mode == UHS_SDR25 ||
+ mmc->selected_mode == UHS_SDR50 ||
+ mmc->selected_mode == UHS_SDR104 ||
+ mmc->selected_mode == UHS_DDR50)
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+ }
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
"sdhci-caps-mask", 0);
dt_caps = dev_read_u64_default(host->mmc->dev,
"sdhci-caps", 0);
- caps = ~(u32)dt_caps_mask &
+ caps = ~lower_32_bits(dt_caps_mask) &
sdhci_readl(host, SDHCI_CAPABILITIES);
- caps |= (u32)dt_caps;
+ caps |= lower_32_bits(dt_caps);
#else
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
#endif
debug("%s, caps: 0x%x\n", __func__, caps);
#ifdef CONFIG_MMC_SDHCI_SDMA
- if (!(caps & SDHCI_CAN_DO_SDMA)) {
- printf("%s: Your controller doesn't support SDMA!!\n",
- __func__);
- return -EINVAL;
+ if ((caps & SDHCI_CAN_DO_SDMA)) {
+ host->flags |= USE_SDMA;
+ } else {
+ debug("%s: Your controller doesn't support SDMA!!\n",
+ __func__);
}
-
- host->flags |= USE_SDMA;
#endif
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
if (!(caps & SDHCI_CAN_DO_ADMA2)) {
/* Check whether the clock multiplier is supported or not */
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
#if CONFIG_IS_ENABLED(DM_MMC)
- caps_1 = ~(u32)(dt_caps_mask >> 32) &
+ caps_1 = ~upper_32_bits(dt_caps_mask) &
sdhci_readl(host, SDHCI_CAPABILITIES_1);
- caps_1 |= (u32)(dt_caps >> 32);
+ caps_1 |= upper_32_bits(dt_caps);
#else
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
#endif
if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
cfg->voltages |= host->voltages;
- cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+ if (caps & SDHCI_CAN_DO_HISPD)
+ cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
+
+ cfg->host_caps |= MMC_MODE_4BIT;
/* Since Host Controller Version3.0 */
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {