return err;
}
-int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
+static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value,
+ bool send_status)
{
struct mmc_cmd cmd;
int timeout = 1000;
while (retries > 0) {
ret = mmc_send_cmd(mmc, &cmd, NULL);
- /* Waiting for the ready status */
- if (!ret) {
- ret = mmc_send_status(mmc, timeout);
- return ret;
+ if (ret) {
+ retries--;
+ continue;
+ }
+
+ if (!send_status) {
+ mdelay(50);
+ return 0;
}
- retries--;
+ /* Waiting for the ready status */
+ return mmc_send_status(mmc, timeout);
}
return ret;
}
+int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
+{
+ return __mmc_switch(mmc, set, index, value, true);
+}
+
#if !CONFIG_IS_ENABLED(MMC_TINY)
-static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode)
+static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode,
+ bool hsdowngrade)
{
int err;
int speed_bits;
default:
return -EINVAL;
}
- err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
- speed_bits);
+
+ err = __mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
+ speed_bits, !hsdowngrade);
if (err)
return err;
+#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
+ CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
+ /*
+ * In case the eMMC is in HS200/HS400 mode and we are downgrading
+ * to HS mode, the card clock are still running much faster than
+ * the supported HS mode clock, so we can not reliably read out
+ * Extended CSD. Reconfigure the controller to run at HS mode.
+ */
+ if (hsdowngrade) {
+ mmc_select_mode(mmc, MMC_HS);
+ mmc_set_clock(mmc, mmc_mode2freq(mmc, MMC_HS), false);
+ }
+#endif
+
if ((mode == MMC_HS) || (mode == MMC_HS_52)) {
/* Now check to see that it worked */
err = mmc_send_ext_csd(mmc, test_csd);
int err;
/* Set timing to HS200 for tuning */
- err = mmc_set_card_speed(mmc, MMC_HS_200);
+ err = mmc_set_card_speed(mmc, MMC_HS_200, false);
if (err)
return err;
}
/* Set back to HS */
- mmc_set_card_speed(mmc, MMC_HS);
+ mmc_set_card_speed(mmc, MMC_HS, false);
mmc_set_clock(mmc, mmc_mode2freq(mmc, MMC_HS), false);
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
if (err)
return err;
- err = mmc_set_card_speed(mmc, MMC_HS_400);
+ err = mmc_set_card_speed(mmc, MMC_HS_400, false);
if (err)
return err;
return -ENOTSUPP;
}
- mmc_set_clock(mmc, mmc->legacy_speed, MMC_CLK_ENABLE);
+#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
+ CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
+ /*
+ * In case the eMMC is in HS200/HS400 mode, downgrade to HS mode
+ * before doing anything else, since a transition from either of
+ * the HS200/HS400 mode directly to legacy mode is not supported.
+ */
+ if (mmc->selected_mode == MMC_HS_200 ||
+ mmc->selected_mode == MMC_HS_400)
+ mmc_set_card_speed(mmc, MMC_HS, true);
+ else
+#endif
+ mmc_set_clock(mmc, mmc->legacy_speed, MMC_CLK_ENABLE);
for_each_mmc_mode_by_pref(card_caps, mwt) {
for_each_supported_width(card_caps & mwt->widths,
}
} else {
/* configure the bus speed (card) */
- err = mmc_set_card_speed(mmc, mwt->mode);
+ err = mmc_set_card_speed(mmc, mwt->mode, false);
if (err)
goto error;