if (!mmc_host_is_spi(mmc))
cmd.cmdarg = mmc->rca << 16;
- do {
+ while (1) {
err = mmc_send_cmd(mmc, &cmd, NULL);
if (!err) {
if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
} else if (--retries < 0)
return err;
- udelay(1000);
+ if (timeout-- <= 0)
+ break;
- } while (timeout--);
+ udelay(1000);
+ }
#ifdef CONFIG_MMC_TRACE
status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9;
int err;
struct mmc_cmd cmd;
- do {
+ while (1) {
cmd.cmdidx = MMC_CMD_APP_CMD;
cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = 0;
if (err)
return err;
- udelay(1000);
- } while ((!(cmd.response[0] & OCR_BUSY)) && timeout--);
+ if (cmd.response[0] & OCR_BUSY)
+ break;
- if (timeout <= 0)
- return UNUSABLE_ERR;
+ if (timeout-- <= 0)
+ return UNUSABLE_ERR;
+
+ udelay(1000);
+ }
if (mmc->version != SD_VERSION_2)
mmc->version = SD_VERSION_1_0;
return 0;
}
-/* We pass in the cmd since otherwise the init seems to fail */
-static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd,
- int use_arg)
+static int mmc_send_op_cond_iter(struct mmc *mmc, int use_arg)
{
+ struct mmc_cmd cmd;
int err;
- cmd->cmdidx = MMC_CMD_SEND_OP_COND;
- cmd->resp_type = MMC_RSP_R3;
- cmd->cmdarg = 0;
- if (use_arg && !mmc_host_is_spi(mmc)) {
- cmd->cmdarg =
+ cmd.cmdidx = MMC_CMD_SEND_OP_COND;
+ cmd.resp_type = MMC_RSP_R3;
+ cmd.cmdarg = 0;
+ if (use_arg && !mmc_host_is_spi(mmc))
+ cmd.cmdarg = OCR_HCS |
(mmc->cfg->voltages &
- (mmc->op_cond_response & OCR_VOLTAGE_MASK)) |
- (mmc->op_cond_response & OCR_ACCESS_MODE);
+ (mmc->ocr & OCR_VOLTAGE_MASK)) |
+ (mmc->ocr & OCR_ACCESS_MODE);
- if (mmc->cfg->host_caps & MMC_MODE_HC)
- cmd->cmdarg |= OCR_HCS;
- }
- err = mmc_send_cmd(mmc, cmd, NULL);
+ err = mmc_send_cmd(mmc, &cmd, NULL);
if (err)
return err;
- mmc->op_cond_response = cmd->response[0];
+ mmc->ocr = cmd.response[0];
return 0;
}
static int mmc_send_op_cond(struct mmc *mmc)
{
- struct mmc_cmd cmd;
int err, i;
/* Some cards seem to need this */
mmc_go_idle(mmc);
/* Asking to the card its capabilities */
- mmc->op_cond_pending = 1;
for (i = 0; i < 2; i++) {
- err = mmc_send_op_cond_iter(mmc, &cmd, i != 0);
+ err = mmc_send_op_cond_iter(mmc, i != 0);
if (err)
return err;
/* exit if not busy (flag seems to be inverted) */
- if (mmc->op_cond_response & OCR_BUSY)
- return 0;
+ if (mmc->ocr & OCR_BUSY)
+ break;
}
- return IN_PROGRESS;
+ mmc->op_cond_pending = 1;
+ return 0;
}
static int mmc_complete_op_cond(struct mmc *mmc)
int err;
mmc->op_cond_pending = 0;
- start = get_timer(0);
- do {
- err = mmc_send_op_cond_iter(mmc, &cmd, 1);
- if (err)
- return err;
- if (get_timer(start) > timeout)
- return UNUSABLE_ERR;
- udelay(100);
- } while (!(mmc->op_cond_response & OCR_BUSY));
+ if (!(mmc->ocr & OCR_BUSY)) {
+ start = get_timer(0);
+ while (1) {
+ err = mmc_send_op_cond_iter(mmc, 1);
+ if (err)
+ return err;
+ if (mmc->ocr & OCR_BUSY)
+ break;
+ if (get_timer(start) > timeout)
+ return UNUSABLE_ERR;
+ udelay(100);
+ }
+ }
if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
if (err)
return err;
+
+ mmc->ocr = cmd.response[0];
}
mmc->version = MMC_VERSION_UNKNOWN;
- mmc->ocr = cmd.response[0];
mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
mmc->rca = 1;
char cardtype;
int err;
- mmc->card_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+ mmc->card_caps = 0;
if (mmc_host_is_spi(mmc))
return 0;
if (mmc->version < MMC_VERSION_4)
return 0;
+ mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
+
err = mmc_send_ext_csd(mmc, ext_csd);
if (err)
return ret;
}
+int mmc_hwpart_config(struct mmc *mmc,
+ const struct mmc_hwpart_conf *conf,
+ enum mmc_hwpart_conf_mode mode)
+{
+ u8 part_attrs = 0;
+ u32 enh_size_mult;
+ u32 enh_start_addr;
+ u32 gp_size_mult[4];
+ u32 max_enh_size_mult;
+ u32 tot_enh_size_mult = 0;
+ u8 wr_rel_set;
+ int i, pidx, err;
+ ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
+
+ if (mode < MMC_HWPART_CONF_CHECK || mode > MMC_HWPART_CONF_COMPLETE)
+ return -EINVAL;
+
+ if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
+ printf("eMMC >= 4.4 required for enhanced user data area\n");
+ return -EMEDIUMTYPE;
+ }
+
+ if (!(mmc->part_support & PART_SUPPORT)) {
+ printf("Card does not support partitioning\n");
+ return -EMEDIUMTYPE;
+ }
+
+ if (!mmc->hc_wp_grp_size) {
+ printf("Card does not define HC WP group size\n");
+ return -EMEDIUMTYPE;
+ }
+
+ /* check partition alignment and total enhanced size */
+ if (conf->user.enh_size) {
+ if (conf->user.enh_size % mmc->hc_wp_grp_size ||
+ conf->user.enh_start % mmc->hc_wp_grp_size) {
+ printf("User data enhanced area not HC WP group "
+ "size aligned\n");
+ return -EINVAL;
+ }
+ part_attrs |= EXT_CSD_ENH_USR;
+ enh_size_mult = conf->user.enh_size / mmc->hc_wp_grp_size;
+ if (mmc->high_capacity) {
+ enh_start_addr = conf->user.enh_start;
+ } else {
+ enh_start_addr = (conf->user.enh_start << 9);
+ }
+ } else {
+ enh_size_mult = 0;
+ enh_start_addr = 0;
+ }
+ tot_enh_size_mult += enh_size_mult;
+
+ for (pidx = 0; pidx < 4; pidx++) {
+ if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
+ printf("GP%i partition not HC WP group size "
+ "aligned\n", pidx+1);
+ return -EINVAL;
+ }
+ gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size;
+ if (conf->gp_part[pidx].size && conf->gp_part[pidx].enhanced) {
+ part_attrs |= EXT_CSD_ENH_GP(pidx);
+ tot_enh_size_mult += gp_size_mult[pidx];
+ }
+ }
+
+ if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
+ printf("Card does not support enhanced attribute\n");
+ return -EMEDIUMTYPE;
+ }
+
+ err = mmc_send_ext_csd(mmc, ext_csd);
+ if (err)
+ return err;
+
+ max_enh_size_mult =
+ (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+2] << 16) +
+ (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
+ ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
+ if (tot_enh_size_mult > max_enh_size_mult) {
+ printf("Total enhanced size exceeds maximum (%u > %u)\n",
+ tot_enh_size_mult, max_enh_size_mult);
+ return -EMEDIUMTYPE;
+ }
+
+ /* The default value of EXT_CSD_WR_REL_SET is device
+ * dependent, the values can only be changed if the
+ * EXT_CSD_HS_CTRL_REL bit is set. The values can be
+ * changed only once and before partitioning is completed. */
+ wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
+ if (conf->user.wr_rel_change) {
+ if (conf->user.wr_rel_set)
+ wr_rel_set |= EXT_CSD_WR_DATA_REL_USR;
+ else
+ wr_rel_set &= ~EXT_CSD_WR_DATA_REL_USR;
+ }
+ for (pidx = 0; pidx < 4; pidx++) {
+ if (conf->gp_part[pidx].wr_rel_change) {
+ if (conf->gp_part[pidx].wr_rel_set)
+ wr_rel_set |= EXT_CSD_WR_DATA_REL_GP(pidx);
+ else
+ wr_rel_set &= ~EXT_CSD_WR_DATA_REL_GP(pidx);
+ }
+ }
+
+ if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET] &&
+ !(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
+ puts("Card does not support host controlled partition write "
+ "reliability settings\n");
+ return -EMEDIUMTYPE;
+ }
+
+ if (ext_csd[EXT_CSD_PARTITION_SETTING] &
+ EXT_CSD_PARTITION_SETTING_COMPLETED) {
+ printf("Card already partitioned\n");
+ return -EPERM;
+ }
+
+ if (mode == MMC_HWPART_CONF_CHECK)
+ return 0;
+
+ /* Partitioning requires high-capacity size definitions */
+ if (!(ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01)) {
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ERASE_GROUP_DEF, 1);
+
+ if (err)
+ return err;
+
+ ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
+
+ /* update erase group size to be high-capacity */
+ mmc->erase_grp_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
+
+ }
+
+ /* all OK, write the configuration */
+ for (i = 0; i < 4; i++) {
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ENH_START_ADDR+i,
+ (enh_start_addr >> (i*8)) & 0xFF);
+ if (err)
+ return err;
+ }
+ for (i = 0; i < 3; i++) {
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ENH_SIZE_MULT+i,
+ (enh_size_mult >> (i*8)) & 0xFF);
+ if (err)
+ return err;
+ }
+ for (pidx = 0; pidx < 4; pidx++) {
+ for (i = 0; i < 3; i++) {
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_GP_SIZE_MULT+pidx*3+i,
+ (gp_size_mult[pidx] >> (i*8)) & 0xFF);
+ if (err)
+ return err;
+ }
+ }
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_PARTITIONS_ATTRIBUTE, part_attrs);
+ if (err)
+ return err;
+
+ if (mode == MMC_HWPART_CONF_SET)
+ return 0;
+
+ /* The WR_REL_SET is a write-once register but shall be
+ * written before setting PART_SETTING_COMPLETED. As it is
+ * write-once we can only write it when completing the
+ * partitioning. */
+ if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET]) {
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_WR_REL_SET, wr_rel_set);
+ if (err)
+ return err;
+ }
+
+ /* Setting PART_SETTING_COMPLETED confirms the partition
+ * configuration but it only becomes effective after power
+ * cycle, so we do not adjust the partition related settings
+ * in the mmc struct. */
+
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_PARTITION_SETTING,
+ EXT_CSD_PARTITION_SETTING_COMPLETED);
+ if (err)
+ return err;
+
+ return 0;
+}
+
int mmc_getcd(struct mmc *mmc)
{
int cd;
mmc->hc_wp_grp_size = 1024
* ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
* ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+
+ mmc->wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
}
err = mmc_set_capacity(mmc, mmc->part_num);
mmc->tran_speed = 50000000;
else
mmc->tran_speed = 25000000;
- } else {
+ } else if (mmc->version >= MMC_VERSION_4) {
+ /* Only version 4 of MMC supports wider bus widths */
int idx;
/* An array of possible bus widths in order of preference */
unsigned int caps = ext_to_hostcaps[extw];
/*
+ * If the bus width is still not changed,
+ * don't try to set the default again.
+ * Otherwise, recover from switch attempts
+ * by switching to 1-bit bus width.
+ */
+ if (extw == EXT_CSD_BUS_WIDTH_1 &&
+ mmc->bus_width == 1) {
+ err = 0;
+ break;
+ }
+
+ /*
* Check to make sure the card and controller support
* these capabilities
*/
if (mmc->has_init)
return 0;
+#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
+ mmc_adapter_card_type_ident();
+#endif
board_mmc_power_init();
/* made sure it's not NULL earlier */
if (err == TIMEOUT) {
err = mmc_send_op_cond(mmc);
- if (err && err != IN_PROGRESS) {
+ if (err) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("Card did not respond to voltage select!\n");
#endif
}
}
- if (err == IN_PROGRESS)
+ if (!err)
mmc->init_in_progress = 1;
return err;
{
int err = 0;
+ mmc->init_in_progress = 0;
if (mmc->op_cond_pending)
err = mmc_complete_op_cond(mmc);
mmc->has_init = 0;
else
mmc->has_init = 1;
- mmc->init_in_progress = 0;
return err;
}
int mmc_init(struct mmc *mmc)
{
- int err = IN_PROGRESS;
+ int err = 0;
unsigned start;
if (mmc->has_init)
if (!mmc->init_in_progress)
err = mmc_start_init(mmc);
- if (!err || err == IN_PROGRESS)
+ if (!err)
err = mmc_complete_init(mmc);
debug("%s: %d, time %lu\n", __func__, err, get_timer(start));
return err;
{
struct mmc *m;
struct list_head *entry;
+ char *mmc_type;
list_for_each(entry, &mmc_devices) {
m = list_entry(entry, struct mmc, link);
+ if (m->has_init)
+ mmc_type = IS_SD(m) ? "SD" : "eMMC";
+ else
+ mmc_type = NULL;
+
printf("%s: %d", m->cfg->name, m->block_dev.dev);
+ if (mmc_type)
+ printf(" (%s)", mmc_type);
if (entry->next != &mmc_devices) {
printf("%c", separator);
list_for_each(entry, &mmc_devices) {
m = list_entry(entry, struct mmc, link);
+#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
+ mmc_set_preinit(m, 1);
+#endif
if (m->preinit)
mmc_start_init(m);
}
projects / platform / kernel / u-boot.git / blobdiff