#include <linux/pm_qos.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <linux/mmc/sdio.h>
#include <linux/scatterlist.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
for (clock = host->mmc->f_min, clk = 0x80000080;
new_clock >= (clock<<1); clk >>= 1)
clock <<= 1;
- clk |= 0x100;
+
+ /* 1/1 clock is option */
+ if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
+ ((clk >> 22) & 0x1))
+ clk |= 0xff;
}
if (host->set_clk_div)
#define TRANSFER_READ 0x1000
#define TRANSFER_MULTI 0x2000
#define SECURITY_CMD 0x4000
+#define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
{
if (data->blocks > 1) {
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
c |= TRANSFER_MULTI;
+
+ /*
+ * Disable auto CMD12 at IO_RW_EXTENDED when
+ * multiple block transfer
+ */
+ if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
+ (cmd->opcode == SD_IO_RW_EXTENDED))
+ c |= NO_CMD12_ISSUE;
}
if (data->flags & MMC_DATA_READ)
c |= TRANSFER_READ;
return 0;
}
+static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
+ unsigned short *buf,
+ unsigned int count)
+{
+ int is_read = host->data->flags & MMC_DATA_READ;
+ u8 *buf8;
+
+ /*
+ * Transfer the data
+ */
+ if (is_read)
+ sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+ else
+ sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+
+ /* if count was even number */
+ if (!(count & 0x1))
+ return;
+
+ /* if count was odd number */
+ buf8 = (u8 *)(buf + (count >> 1));
+
+ /*
+ * FIXME
+ *
+ * driver and this function are assuming that
+ * it is used as little endian
+ */
+ if (is_read)
+ *buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
+ else
+ sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
+}
+
/*
* This chip always returns (at least?) as much data as you ask for.
* I'm unsure what happens if you ask for less than a block. This should be
count, host->sg_off, data->flags);
/* Transfer the data */
- if (data->flags & MMC_DATA_READ)
- sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
- else
- sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+ tmio_mmc_transfer_data(host, buf, count);
host->sg_off += count;
goto out;
if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
+ u32 status = sd_ctrl_read32(host, CTL_STATUS);
+ bool done = false;
+
/*
* Has all data been written out yet? Testing on SuperH showed,
* that in most cases the first interrupt comes already with the
* DATAEND interrupt with the BUSY bit set, in this cases
* waiting for one more interrupt fixes the problem.
*/
- if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
+ if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
+ if (status & TMIO_STAT_ILL_FUNC)
+ done = true;
+ } else {
+ if (!(status & TMIO_STAT_CMD_BUSY))
+ done = true;
+ }
+
+ if (done) {
tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
tasklet_schedule(&host->dma_complete);
}
pr_debug_status(*status);
pr_debug_status(*ireg);
+
+ /* Clear the status except the interrupt status */
+ sd_ctrl_write32(host, CTL_STATUS, TMIO_MASK_IRQ);
}
static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
struct mmc_host *mmc = host->mmc;
struct tmio_mmc_data *pdata = host->pdata;
unsigned int ireg, status;
+ unsigned int sdio_status;
if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
return IRQ_HANDLED;
status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
- sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL);
+ sdio_status = status & ~TMIO_SDIO_MASK_ALL;
+ if (pdata->flags & TMIO_MMC_SDIO_STATUS_QUIRK)
+ sdio_status |= 6;
+
+ sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
mmc_signal_sdio_irq(mmc);
return ret;
}
+static int tmio_multi_io_quirk(struct mmc_card *card,
+ unsigned int direction, int blk_size)
+{
+ struct tmio_mmc_host *host = mmc_priv(card->host);
+ struct tmio_mmc_data *pdata = host->pdata;
+
+ if (pdata->multi_io_quirk)
+ return pdata->multi_io_quirk(card, direction, blk_size);
+
+ return blk_size;
+}
+
static const struct mmc_host_ops tmio_mmc_ops = {
.request = tmio_mmc_request,
.set_ios = tmio_mmc_set_ios,
.get_ro = tmio_mmc_get_ro,
.get_cd = mmc_gpio_get_cd,
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
+ .multi_io_quirk = tmio_multi_io_quirk,
};
static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
}
/*
+ * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
+ * looping forever...
+ */
+ if (mmc->f_min == 0) {
+ ret = -EINVAL;
+ goto host_free;
+ }
+
+ /*
* While using internal tmio hardware logic for card detection, we need
* to ensure it stays powered for it to work.
*/