for (clock = host->mmc->f_min, clk = 0x80000080;
new_clock >= (clock<<1); clk >>= 1)
clock <<= 1;
- clk |= 0x100;
+
+ /* 1/1 clock is option */
+ if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
+ ((clk >> 22) & 0x1))
+ clk |= 0xff;
}
if (host->set_clk_div)
return 0;
}
+static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
+ unsigned short *buf,
+ unsigned int count)
+{
+ int is_read = host->data->flags & MMC_DATA_READ;
+ u8 *buf8;
+
+ /*
+ * Transfer the data
+ */
+ if (is_read)
+ sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+ else
+ sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+
+ /* if count was even number */
+ if (!(count & 0x1))
+ return;
+
+ /* if count was odd number */
+ buf8 = (u8 *)(buf + (count >> 1));
+
+ /*
+ * FIXME
+ *
+ * driver and this function are assuming that
+ * it is used as little endian
+ */
+ if (is_read)
+ *buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
+ else
+ sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
+}
+
/*
* This chip always returns (at least?) as much data as you ask for.
* I'm unsure what happens if you ask for less than a block. This should be
count, host->sg_off, data->flags);
/* Transfer the data */
- if (data->flags & MMC_DATA_READ)
- sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
- else
- sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+ tmio_mmc_transfer_data(host, buf, count);
host->sg_off += count;
return ret;
}
+static int tmio_multi_io_quirk(struct mmc_card *card,
+ unsigned int direction, int blk_size)
+{
+ struct tmio_mmc_host *host = mmc_priv(card->host);
+ struct tmio_mmc_data *pdata = host->pdata;
+
+ if (pdata->multi_io_quirk)
+ return pdata->multi_io_quirk(card, direction, blk_size);
+
+ return blk_size;
+}
+
static const struct mmc_host_ops tmio_mmc_ops = {
.request = tmio_mmc_request,
.set_ios = tmio_mmc_set_ios,
.get_ro = tmio_mmc_get_ro,
.get_cd = mmc_gpio_get_cd,
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
+ .multi_io_quirk = tmio_multi_io_quirk,
};
static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
}
/*
+ * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
+ * looping forever...
+ */
+ if (mmc->f_min == 0) {
+ ret = -EINVAL;
+ goto host_free;
+ }
+
+ /*
* While using internal tmio hardware logic for card detection, we need
* to ensure it stays powered for it to work.
*/