+// SPDX-License-Identifier: GPL-2.0+
/*
* ARM PrimeCell MultiMedia Card Interface - PL180
*
* Author: Ulf Hansson <ulf.hansson@stericsson.com>
* Author: Martin Lundholm <martin.xa.lundholm@stericsson.com>
* Ported to drivers/mmc/ by: Matt Waddel <matt.waddel@linaro.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/* #define DEBUG */
-#include <asm/io.h>
#include "common.h"
+#include <clk.h>
#include <errno.h>
+#include <malloc.h>
#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+
#include "arm_pl180_mmci.h"
-#include <malloc.h>
+
+#ifdef CONFIG_DM_MMC
+#include <dm.h>
+#define MMC_CLOCK_MAX 48000000
+#define MMC_CLOCK_MIN 400000
+
+struct arm_pl180_mmc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+#endif
static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
{
return result;
}
-/* MMC uses open drain drivers in the enumeration phase */
-static int mmc_host_reset(struct mmc *dev)
-{
- struct pl180_mmc_host *host = dev->priv;
-
- writel(host->pwr_init, &host->base->power);
-
- return 0;
-}
-
-static void host_set_ios(struct mmc *dev)
+static int host_set_ios(struct mmc *dev)
{
struct pl180_mmc_host *host = dev->priv;
u32 sdi_clkcr;
writel(sdi_clkcr, &host->base->clock);
udelay(CLK_CHANGE_DELAY);
+
+ return 0;
+}
+
+#ifndef CONFIG_DM_MMC
+/* MMC uses open drain drivers in the enumeration phase */
+static int mmc_host_reset(struct mmc *dev)
+{
+ struct pl180_mmc_host *host = dev->priv;
+
+ writel(host->pwr_init, &host->base->power);
+
+ return 0;
}
static const struct mmc_ops arm_pl180_mmci_ops = {
* Set initial clock and power for mmc slot.
* Initialize mmc struct and register with mmc framework.
*/
-int arm_pl180_mmci_init(struct pl180_mmc_host *host)
+
+int arm_pl180_mmci_init(struct pl180_mmc_host *host, struct mmc **mmc)
{
- struct mmc *mmc;
u32 sdi_u32;
writel(host->pwr_init, &host->base->power);
host->cfg.name = host->name;
host->cfg.ops = &arm_pl180_mmci_ops;
+
/* TODO remove the duplicates */
host->cfg.host_caps = host->caps;
host->cfg.voltages = host->voltages;
else
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
- mmc = mmc_create(&host->cfg, host);
- if (mmc == NULL)
+ *mmc = mmc_create(&host->cfg, host);
+ if (!*mmc)
return -1;
+ debug("registered mmc interface number is:%d\n",
+ (*mmc)->block_dev.devnum);
+
+ return 0;
+}
+#endif
- debug("registered mmc interface number is:%d\n", mmc->block_dev.devnum);
+#ifdef CONFIG_DM_MMC
+static void arm_pl180_mmc_init(struct pl180_mmc_host *host)
+{
+ u32 sdi_u32;
+
+ writel(host->pwr_init, &host->base->power);
+ writel(host->clkdiv_init, &host->base->clock);
+ udelay(CLK_CHANGE_DELAY);
+
+ /* Disable mmc interrupts */
+ sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK;
+ writel(sdi_u32, &host->base->mask0);
+}
+
+static int arm_pl180_mmc_probe(struct udevice *dev)
+{
+ struct arm_pl180_mmc_plat *pdata = dev_get_platdata(dev);
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct mmc *mmc = &pdata->mmc;
+ struct pl180_mmc_host *host = dev->priv;
+ struct mmc_config *cfg = &pdata->cfg;
+ struct clk clk;
+ u32 bus_width;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret) {
+ clk_free(&clk);
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ host->pwr_init = INIT_PWR;
+ host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN |
+ SDI_CLKCR_HWFC_EN;
+ host->clock_in = clk_get_rate(&clk);
+ host->version2 = dev_get_driver_data(dev);
+
+ cfg->name = dev->name;
+ cfg->voltages = VOLTAGE_WINDOW_SD;
+ cfg->host_caps = 0;
+ cfg->f_min = host->clock_in / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
+ cfg->f_max = dev_read_u32_default(dev, "max-frequency", MMC_CLOCK_MAX);
+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ gpio_request_by_name(dev, "cd-gpios", 0, &host->cd_gpio, GPIOD_IS_IN);
+
+ bus_width = dev_read_u32_default(dev, "bus-width", 1);
+ switch (bus_width) {
+ case 8:
+ cfg->host_caps |= MMC_MODE_8BIT;
+ /* Hosts capable of 8-bit transfers can also do 4 bits */
+ case 4:
+ cfg->host_caps |= MMC_MODE_4BIT;
+ break;
+ case 1:
+ break;
+ default:
+ dev_err(dev, "Invalid bus-width value %u\n", bus_width);
+ }
+
+ arm_pl180_mmc_init(host);
+ mmc->priv = host;
+ mmc->dev = dev;
+ upriv->mmc = mmc;
return 0;
}
+
+int arm_pl180_mmc_bind(struct udevice *dev)
+{
+ struct arm_pl180_mmc_plat *plat = dev_get_platdata(dev);
+
+ return mmc_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static int dm_host_request(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+ return host_request(mmc, cmd, data);
+}
+
+static int dm_host_set_ios(struct udevice *dev)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+ return host_set_ios(mmc);
+}
+
+static int dm_mmc_getcd(struct udevice *dev)
+{
+ struct pl180_mmc_host *host = dev->priv;
+ int value = 1;
+
+ if (dm_gpio_is_valid(&host->cd_gpio))
+ value = dm_gpio_get_value(&host->cd_gpio);
+
+ return value;
+}
+
+static const struct dm_mmc_ops arm_pl180_dm_mmc_ops = {
+ .send_cmd = dm_host_request,
+ .set_ios = dm_host_set_ios,
+ .get_cd = dm_mmc_getcd,
+};
+
+static int arm_pl180_mmc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct pl180_mmc_host *host = dev->priv;
+ fdt_addr_t addr;
+
+ addr = dev_read_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ host->base = (void *)addr;
+
+ return 0;
+}
+
+static const struct udevice_id arm_pl180_mmc_match[] = {
+ { .compatible = "st,stm32f4xx-sdio", .data = VERSION1 },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(arm_pl180_mmc) = {
+ .name = "arm_pl180_mmc",
+ .id = UCLASS_MMC,
+ .of_match = arm_pl180_mmc_match,
+ .ops = &arm_pl180_dm_mmc_ops,
+ .probe = arm_pl180_mmc_probe,
+ .ofdata_to_platdata = arm_pl180_mmc_ofdata_to_platdata,
+ .bind = arm_pl180_mmc_bind,
+ .priv_auto_alloc_size = sizeof(struct pl180_mmc_host),
+ .platdata_auto_alloc_size = sizeof(struct arm_pl180_mmc_plat),
+};
+#endif