config MMC
bool "MMC/SD/SDIO card support"
default ARM || PPC || SANDBOX
+ select HAVE_BLOCK_DEVICE
help
This selects MultiMediaCard, Secure Digital and Secure
Digital I/O support.
If you want MMC/SD/SDIO support, you should say Y here and
also to your specific host controller driver.
+config MMC_WRITE
+ bool "support for MMC/SD write operations"
+ depends on MMC
+ default y
+ help
+ Enable write access to MMC and SD Cards
+
+config MMC_BROKEN_CD
+ bool "Poll for broken card detection case"
+ help
+ If card detection feature is broken, just poll to detect.
+
config DM_MMC
bool "Enable MMC controllers using Driver Model"
depends on DM
appear as block devices in U-Boot and can support filesystems such
as EXT4 and FAT.
-config DM_MMC_OPS
- bool "Support MMC controller operations using Driver Model"
- depends on DM_MMC
- default y if DM_MMC
- help
- Driver model provides a means of supporting device operations. This
- option moves MMC operations under the control of driver model. The
- option will be removed as soon as all DM_MMC drivers use it, as it
- will the only supported behaviour.
-
config SPL_DM_MMC
bool "Enable MMC controllers using Driver Model in SPL"
depends on SPL_DM && DM_MMC
appear as block devices in U-Boot and can support filesystems such
as EXT4 and FAT.
-config SPL_DM_MMC_OPS
- bool "Support MMC controller operations using Driver Model in SPL"
- depends on SPL_DM && DM_MMC_OPS
+if MMC
+
+config ARM_PL180_MMCI
+ bool "ARM AMBA Multimedia Card Interface and compatible support"
+ depends on DM_MMC && OF_CONTROL
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+ Interface (PL180, PL181 and compatible) support.
+ If you have an ARM(R) platform with a Multimedia Card slot,
+ say Y or M here.
+
+config MMC_QUIRKS
+ bool "Enable quirks"
default y
help
- Driver model provides a means of supporting device operations. This
- option moves MMC operations under the control of driver model. The
- option will be removed as soon as all DM_MMC drivers use it, as it
- will the only supported behaviour.
+ Some cards and hosts may sometimes behave unexpectedly (quirks).
+ This option enable workarounds to handle those quirks. Some of them
+ are enabled by default, other may require additionnal flags or are
+ enabled by the host driver.
-if MMC
+config MMC_HW_PARTITIONING
+ bool "Support for HW partitioning command(eMMC)"
+ default y
+ help
+ This adds a command and an API to do hardware partitioning on eMMC
+ devices.
+
+config MMC_IO_VOLTAGE
+ bool "Support IO voltage configuration"
+ help
+ IO voltage configuration allows selecting the voltage level of the IO
+ lines (not the level of main supply). This is required for UHS
+ support. For eMMC this not mandatory, but not enabling this option may
+ prevent the driver of using the faster modes.
+
+config SPL_MMC_IO_VOLTAGE
+ bool "Support IO voltage configuration in SPL"
+ default n
+ help
+ IO voltage configuration allows selecting the voltage level of the IO
+ lines (not the level of main supply). This is required for UHS
+ support. For eMMC this not mandatory, but not enabling this option may
+ prevent the driver of using the faster modes.
+
+config MMC_UHS_SUPPORT
+ bool "enable UHS support"
+ depends on MMC_IO_VOLTAGE
+ help
+ The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+ cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+ frequency can go up to 208MHz (SDR104)
+
+config SPL_MMC_UHS_SUPPORT
+ bool "enable UHS support in SPL"
+ depends on SPL_MMC_IO_VOLTAGE
+ help
+ The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+ cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+ frequency can go up to 208MHz (SDR104)
+
+config MMC_HS200_SUPPORT
+ bool "enable HS200 support"
+ help
+ The HS200 mode is support by some eMMC. The bus frequency is up to
+ 200MHz. This mode requires tuning the IO.
+
+
+config SPL_MMC_HS200_SUPPORT
+ bool "enable HS200 support in SPL"
+ help
+ The HS200 mode is support by some eMMC. The bus frequency is up to
+ 200MHz. This mode requires tuning the IO.
+
+config MMC_VERBOSE
+ bool "Output more information about the MMC"
+ default y
+ help
+ Enable the output of more information about the card such as the
+ operating mode.
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
config MMC_MESON_GX
bool "Meson GX EMMC controller support"
- depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_MESON
+ depends on DM_MMC && BLK && ARCH_MESON
help
Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
config MMC_MXS
bool "Freescale MXS Multimedia Card Interface support"
+ depends on MX23 || MX28 || MX6 || MX7
+ select APBH_DMA
+ select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
+ select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
help
This selects the Freescale SSP MMC controller found on MXS based
platforms like mx23/28.
config MMC_OMAP_HS
bool "TI OMAP High Speed Multimedia Card Interface support"
- select DM_MMC_OPS if DM_MMC
+ select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
+ select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
help
This selects the TI OMAP High Speed Multimedia card Interface.
If you have an omap2plus board with a Multimedia Card slot,
If unsure, say N.
+config MMC_OMAP_HS_ADMA
+ bool "ADMA support for OMAP HS MMC"
+ depends on MMC_OMAP_HS && !OMAP34XX
+ default y if !AM33XX
+ help
+ This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
+ controller). If supported by the hardware, selecting this option will
+ increase performances.
+
config MMC_OMAP36XX_PINS
bool "Enable MMC1 on OMAP36xx/37xx"
depends on OMAP34XX && MMC_OMAP_HS
Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
config MMC_UNIPHIER
- bool "UniPhier SD/MMC Host Controller support"
- depends on ARCH_UNIPHIER
- depends on BLK && DM_MMC_OPS
+ bool "UniPhier/RCar SD/MMC Host Controller support"
+ depends on ARCH_UNIPHIER || ARCH_RMOBILE
+ depends on BLK && DM_MMC
+ depends on OF_CONTROL
+ help
+ This selects support for the Matsushita SD/MMC Host Controller on
+ SocioNext UniPhier and Renesas RCar SoCs.
+
+config MMC_BCM2835
+ bool "BCM2835 family custom SD/MMC Host Controller support"
+ depends on ARCH_BCM283X
+ depends on BLK && DM_MMC
depends on OF_CONTROL
+ default y
help
- This selects support for the SD/MMC Host Controller on UniPhier SoCs.
+ This selects support for the custom SD host controller in the BCM2835
+ family of devices.
+
+ If you have a BCM2835 platform with SD or MMC devices, say Y here.
+
+ If unsure, say N.
config MMC_SANDBOX
bool "Sandbox MMC support"
depends on SANDBOX
- depends on BLK && DM_MMC_OPS && OF_CONTROL
+ depends on BLK && DM_MMC && OF_CONTROL
help
This select a dummy sandbox MMC driver. At present this does nothing
other than allow sandbox to be build with MMC support. This
config MMC_SDHCI_ATMEL
bool "Atmel SDHCI controller support"
depends on ARCH_AT91
- depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+ depends on DM_MMC && BLK && ARCH_AT91
depends on MMC_SDHCI
help
This enables support for the Atmel SDHCI controller, which supports
config MMC_SDHCI_CADENCE
bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
- depends on BLK && DM_MMC_OPS
+ depends on BLK && DM_MMC
depends on MMC_SDHCI
depends on OF_CONTROL
help
config MMC_SDHCI_MSM
bool "Qualcomm SDHCI controller"
- depends on BLK && DM_MMC_OPS
+ depends on BLK && DM_MMC
depends on MMC_SDHCI
help
Enables support for SDHCI 2.0 controller present on some Qualcomm
config MMC_SDHCI_ROCKCHIP
bool "Arasan SDHCI controller for Rockchip support"
depends on ARCH_ROCKCHIP
- depends on DM_MMC && BLK && DM_MMC_OPS
+ depends on DM_MMC && BLK
depends on MMC_SDHCI
help
Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
config MMC_SDHCI_ZYNQ
bool "Arasan SDHCI controller support"
depends on ARCH_ZYNQ || ARCH_ZYNQMP
- depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
+ depends on DM_MMC && OF_CONTROL && BLK
depends on MMC_SDHCI
help
Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+config ZYNQ_SDHCI_MAX_FREQ
+ int "Set the maximum frequency of the controller"
+ depends on MMC_SDHCI_ZYNQ
+ help
+ Set the maximum frequency of the controller.
+
+config ZYNQ_SDHCI_MIN_FREQ
+ int "Set the minimum frequency of the controller"
+ depends on MMC_SDHCI_ZYNQ
+ default 0
+ help
+ Set the minimum frequency of the controller.
+
config MMC_SUNXI
bool "Allwinner sunxi SD/MMC Host Controller support"
depends on ARCH_SUNXI && !UART0_PORT_F
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
+config MMC_SUNXI_HAS_NEW_MODE
+ bool
+ depends on MMC_SUNXI
+
config GENERIC_ATMEL_MCI
bool "Atmel Multimedia Card Interface support"
- depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+ depends on DM_MMC && BLK && ARCH_AT91
help
This enables support for Atmel High Speed Multimedia Card Interface
(HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
the SD Memory Card Specification V2.0, the SDIO V2.0 specification
and CE-ATA V1.1.
+config STM32_SDMMC2
+ bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
+ depends on DM_MMC && BLK && OF_CONTROL
+ help
+ This selects support for the SD/MMC controller on STM32H7 SoCs.
+ If you have a board based on such a SoC and with a SD/MMC slot,
+ say Y or M here.
+
+config FTSDC010
+ bool "Ftsdc010 SD/MMC controller Support"
+ help
+ This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
+
+config FTSDC010_SDIO
+ bool "Support ftsdc010 sdio"
+ default n
+ depends on FTSDC010
+ help
+ This can enable ftsdc010 sdio function.
+
endif
config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
approach once proper kernel integration made it mainline.
+config FSL_ESDHC
+ bool "Freescale/NXP eSDHC controller support"
+ help
+ This selects support for the eSDHC (enhanced secure digital host
+ controller) found on numerous Freescale/NXP SoCs.
+
endmenu
config SYS_FSL_ERRATUM_ESDHC111