This adds a command and an API to do hardware partitioning on eMMC
devices.
+config SUPPORT_EMMC_RPMB
+ bool "Support eMMC replay protected memory block (RPMB)"
+ imply CMD_MMC_RPMB
+ help
+ Enable support for reading, writing and programming the
+ key for the Replay Protection Memory Block partition in eMMC.
+
config MMC_IO_VOLTAGE
bool "Support IO voltage configuration"
help
cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
frequency can go up to 208MHz (SDR104)
+config MMC_HS400_SUPPORT
+ bool "enable HS400 support"
+ select MMC_HS200_SUPPORT
+ help
+ The HS400 mode is support by some eMMC. The bus frequency is up to
+ 200MHz. This mode requires tuning the IO.
+
+config SPL_MMC_HS400_SUPPORT
+ bool "enable HS400 support in SPL"
+ help
+ The HS400 mode is support by some eMMC. The bus frequency is up to
+ 200MHz. This mode requires tuning the IO.
+
config MMC_HS200_SUPPORT
bool "enable HS200 support"
help
Enable the output of more information about the card such as the
operating mode.
+config MMC_TRACE
+ bool "MMC debugging"
+ default n
+ help
+ This is an option for use by developer. Enable MMC core debugging.
+
+ If you need to see the MMC core message, say Y.
+
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
help
help
Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
+config SH_MMCIF
+ bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
+ depends on ARCH_RMOBILE || SH
+ help
+ Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
+
config MMC_UNIPHIER
- bool "UniPhier/RCar SD/MMC Host Controller support"
- depends on ARCH_UNIPHIER || ARCH_RMOBILE
+ bool "UniPhier SD/MMC Host Controller support"
+ depends on ARCH_UNIPHIER
depends on BLK && DM_MMC
depends on OF_CONTROL
help
This selects support for the Matsushita SD/MMC Host Controller on
- SocioNext UniPhier and Renesas RCar SoCs.
+ SocioNext UniPhier SoCs.
+
+config RENESAS_SDHI
+ bool "Renesas R-Car SD/MMC Host Controller support"
+ depends on ARCH_RMOBILE
+ depends on BLK && DM_MMC
+ depends on OF_CONTROL
+ help
+ This selects support for the Matsushita SD/MMC Host Controller on
+ Renesas R-Car SoCs.
config MMC_BCM2835
bool "BCM2835 family custom SD/MMC Host Controller support"
If unsure, say N.
+config MMC_SDHCI_BCMSTB
+ tristate "SDHCI support for the BCMSTB SD/MMC Controller"
+ depends on MMC_SDHCI
+ help
+ This selects the Broadcom set-top box SD/MMC controller.
+
+ If you have a BCMSTB platform with SD or MMC devices,
+ say Y here.
+
+ If unsure, say N.
+
config MMC_SDHCI_CADENCE
bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
depends on BLK && DM_MMC
If unsure, say N.
+config MMC_SDHCI_K3_ARASAN
+ bool "Arasan SDHCI controller for TI's K3 based SoCs"
+ depends on ARCH_K3
+ depends on MMC_SDHCI
+ depends on DM_MMC && OF_CONTROL && BLK
+ help
+ Support for Arasan SDHCI host controller on Texas Instruments'
+ K3 family based SoC platforms
+
config MMC_SDHCI_KONA
bool "SDHCI support on Broadcom KONA platform"
depends on MMC_SDHCI
config MMC_SDHCI_ZYNQ
bool "Arasan SDHCI controller support"
- depends on ARCH_ZYNQ || ARCH_ZYNQMP
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
depends on DM_MMC && OF_CONTROL && BLK
depends on MMC_SDHCI
help
bool
depends on MMC_SUNXI
+config MMC_SUNXI_HAS_MODE_SWITCH
+ bool
+ depends on MMC_SUNXI
+
config GENERIC_ATMEL_MCI
bool "Atmel Multimedia Card Interface support"
depends on DM_MMC && BLK && ARCH_AT91
If you have a board based on such a SoC and with a SD/MMC slot,
say Y or M here.
-config MMC_NDS32
- bool "Andestech SD/MMC controller support"
- depends on DM_MMC && OF_CONTROL && BLK && FTSDC010
- help
- This enables support for the Andestech SD/MMM controller, which is
- based on Faraday IP.
-
config FTSDC010
bool "Ftsdc010 SD/MMC controller Support"
help
This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
+config FTSDC010_SDIO
+ bool "Support ftsdc010 sdio"
+ default n
+ depends on FTSDC010
+ help
+ This can enable ftsdc010 sdio function.
+
+config MMC_MTK
+ bool "MediaTek SD/MMC Card Interface support"
+ depends on ARCH_MEDIATEK
+ depends on BLK && DM_MMC
+ depends on OF_CONTROL
+ help
+ This selects the MediaTek(R) Secure digital and Multimedia card Interface.
+ If you have a machine with a integrated SD/MMC card reader, say Y or M here.
+ This is needed if support for any SD/SDIO/MMC devices is required.
+ If unsure, say N.
+
endif
config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
approach once proper kernel integration made it mainline.
+config FSL_ESDHC
+ bool "Freescale/NXP eSDHC controller support"
+ help
+ This selects support for the eSDHC (enhanced secure digital host
+ controller) found on numerous Freescale/NXP SoCs.
+
endmenu
config SYS_FSL_ERRATUM_ESDHC111