Merge branch 'master' of git://git.denx.de/u-boot-samsung

[platform/kernel/u-boot.git] / drivers / misc / Kconfig

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4af1cbf..92f348f 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -20,6 +20,19 @@ config ALTERA_SYSID
          Select this to enable a sysid for Altera devices. Please find
          details on the "Embedded Peripherals IP User Guide" of Altera.
 
+config ROCKCHIP_EFUSE
+        bool "Rockchip e-fuse support"
+       depends on MISC
+       help
+         Enable (read-only) access for the e-fuse block found in Rockchip
+         SoCs: accesses can either be made using byte addressing and a length
+         or through child-nodes that are generated based on the e-fuse map
+         retrieved from the DTS.
+
+         This driver currently supports the RK3399 only, but can easily be
+         extended (by porting the read function from the Linux kernel sources)
+         to support other recent Rockchip devices.
+
 config CMD_CROS_EC
        bool "Enable crosec command"
        depends on CROS_EC
@@ -75,6 +88,14 @@ config CROS_EC_SPI
          provides a faster and more robust interface than I2C but the bugs
          are less interesting.
 
+config DS4510
+       bool "Enable support for DS4510 CPU supervisor"
+       help
+         Enable support for the Maxim DS4510 CPU supervisor. It has an
+         integrated 64-byte EEPROM, four programmable non-volatile I/O pins
+         and a configurable timer for the supervisor function. The device is
+         connected over I2C.
+
 config FSL_SEC_MON
        bool "Enable FSL SEC_MON Driver"
        help
@@ -90,6 +111,14 @@ config MXC_OCOTP
          Programmable memory pages that are stored on the some
          Freescale i.MX processors.
 
+config NUVOTON_NCT6102D
+       bool "Enable Nuvoton NCT6102D Super I/O driver"
+       help
+         If you say Y here, you will get support for the Nuvoton
+         NCT6102D Super I/O driver. This can be used to enable or
+         disable the legacy UART, the watchdog or other devices
+         in the Nuvoton Super IO chips on X86 platforms.
+
 config PWRSEQ
        bool "Enable power-sequencing drivers"
        depends on DM
@@ -121,6 +150,13 @@ config PCA9551_I2C_ADDR
        help
          The I2C address of the PCA9551 LED controller.
 
+config TEGRA_CAR
+       bool "Enable support for the Tegra CAR driver"
+       depends on TEGRA_NO_BPMP
+       help
+         The Tegra CAR (Clock and Reset Controller) is a HW module that
+         controls almost all clocks and resets in a Tegra SoC.
+
 config TEGRA186_BPMP
        bool "Enable support for the Tegra186 BPMP driver"
        depends on TEGRA186