module_param_named(pid, pid_filter, int, 0644);
MODULE_PARM_DESC(pid, "set default 0=on 1=off");
+static int dvb_usb_it913x_firmware;
+module_param_named(firmware, dvb_usb_it913x_firmware, int, 0644);
+MODULE_PARM_DESC(firmware, "set firmware 0=auto 1=IT9137 2=IT9135V1");
+
+
int cmd_counter;
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
struct it913x_state {
u8 id;
-};
-
-struct ite_config {
- u8 chip_ver;
- u16 chip_type;
- u32 firmware;
- u8 tuner_id_0;
- u8 tuner_id_1;
- u8 dual_mode;
+ struct ite_config it913x_config;
};
struct ite_config it913x_config;
+#define IT913X_RETRY 10
+#define IT913X_SND_TIMEOUT 100
+#define IT913X_RCV_TIMEOUT 200
+
static int it913x_bulk_write(struct usb_device *dev,
u8 *snd, int len, u8 pipe)
{
- int ret, actual_l;
+ int ret, actual_l, i;
+
+ for (i = 0; i < IT913X_RETRY; i++) {
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
+ snd, len , &actual_l, IT913X_SND_TIMEOUT);
+ if (ret == 0 || ret != -EBUSY || ret != -ETIMEDOUT)
+ break;
+ }
+
+ if (len != actual_l && ret == 0)
+ ret = -EAGAIN;
- ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
- snd, len , &actual_l, 100);
return ret;
}
static int it913x_bulk_read(struct usb_device *dev,
u8 *rev, int len, u8 pipe)
{
- int ret, actual_l;
+ int ret, actual_l, i;
+
+ for (i = 0; i < IT913X_RETRY; i++) {
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
+ rev, len , &actual_l, IT913X_RCV_TIMEOUT);
+ if (ret == 0 || ret != -EBUSY || ret != -ETIMEDOUT)
+ break;
+ }
+
+ if (len != actual_l && ret == 0)
+ ret = -EAGAIN;
- ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
- rev, len , &actual_l, 200);
return ret;
}
return ~sum;
}
-static int it913x_io(struct usb_device *udev, u8 mode, u8 pro,
+static int it913x_usb_talk(struct usb_device *udev, u8 mode, u8 pro,
u8 cmd, u32 reg, u8 addr, u8 *data, u8 len)
{
int ret = 0, i, buf_size = 1;
buff[buf_size++] = (chk_sum & 0xff);
ret = it913x_bulk_write(udev, buff, buf_size , 0x02);
+ if (ret < 0)
+ goto error;
- ret |= it913x_bulk_read(udev, buff, (mode & 1) ?
+ ret = it913x_bulk_read(udev, buff, (mode & 1) ?
5 : len + 5 , 0x01);
+ if (ret < 0)
+ goto error;
rlen = (mode & 0x1) ? 0x1 : len;
if (mode & 1)
- ret |= buff[2];
+ ret = buff[2];
else
memcpy(data, &buff[3], rlen);
cmd_counter++;
- kfree(buff);
+error: kfree(buff);
- return (ret < 0) ? -ENODEV : 0;
+ return ret;
+}
+
+static int it913x_io(struct usb_device *udev, u8 mode, u8 pro,
+ u8 cmd, u32 reg, u8 addr, u8 *data, u8 len)
+{
+ int ret, i;
+
+ for (i = 0; i < IT913X_RETRY; i++) {
+ ret = it913x_usb_talk(udev, mode, pro,
+ cmd, reg, addr, data, len);
+ if (ret != -EAGAIN)
+ break;
+ }
+
+ return ret;
}
static int it913x_wr_reg(struct usb_device *udev, u8 pro, u32 reg , u8 data)
static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
- int ret = 0;
+ struct usb_device *udev = adap->dev->udev;
+ int ret;
u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
return -EAGAIN;
deb_info(1, "PID_C (%02x)", onoff);
- if (!onoff)
- ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1);
+ ret = it913x_wr_reg(udev, pro, PID_EN, onoff);
mutex_unlock(&adap->dev->i2c_mutex);
return ret;
int index, u16 pid, int onoff)
{
struct usb_device *udev = adap->dev->udev;
- int ret = 0;
+ int ret;
u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
- if (pid_filter > 0)
- return 0;
-
if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
return -EAGAIN;
deb_info(1, "PID_F (%02x)", onoff);
- if (onoff) {
- ret = it913x_wr_reg(udev, pro, PID_EN, 0x1);
-
- ret |= it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff));
- ret |= it913x_wr_reg(udev, pro, PID_MSB, (u8)(pid >> 8));
+ ret = it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff));
- ret |= it913x_wr_reg(udev, pro, PID_INX_EN, (u8)onoff);
+ ret |= it913x_wr_reg(udev, pro, PID_MSB, (u8)(pid >> 8));
- ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f));
+ ret |= it913x_wr_reg(udev, pro, PID_INX_EN, (u8)onoff);
- }
+ ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f));
mutex_unlock(&adap->dev->i2c_mutex);
return 0;
if ((ibuf[2] + ibuf[3]) == 0xff) {
key = ibuf[2];
- key += ibuf[0] << 8;
- deb_info(1, "INT Key =%08x", key);
+ key += ibuf[0] << 16;
+ key += ibuf[1] << 8;
+ deb_info(1, "NEC Extended Key =%08x", key);
if (d->rc_dev != NULL)
rc_keydown(d->rc_dev, key, 0);
}
+
mutex_unlock(&d->i2c_mutex);
return ret;
}
+
+/* Firmware sets raw */
+const char fw_it9135_v1[] = "dvb-usb-it9135-01.fw";
+const char fw_it9135_v2[] = "dvb-usb-it9135-02.fw";
+const char fw_it9137[] = "dvb-usb-it9137-01.fw";
+
+static int ite_firmware_select(struct usb_device *udev,
+ struct dvb_usb_device_properties *props)
+{
+ int sw;
+ /* auto switch */
+ if (le16_to_cpu(udev->descriptor.idProduct) ==
+ USB_PID_ITETECH_IT9135)
+ sw = IT9135_V1_FW;
+ else if (le16_to_cpu(udev->descriptor.idProduct) ==
+ USB_PID_ITETECH_IT9135_9005)
+ sw = IT9135_V1_FW;
+ else if (le16_to_cpu(udev->descriptor.idProduct) ==
+ USB_PID_ITETECH_IT9135_9006) {
+ sw = IT9135_V2_FW;
+ if (it913x_config.tuner_id_0 == 0)
+ it913x_config.tuner_id_0 = IT9135_60;
+ } else
+ sw = IT9137_FW;
+
+ /* force switch */
+ if (dvb_usb_it913x_firmware != IT9135_AUTO)
+ sw = dvb_usb_it913x_firmware;
+
+ switch (sw) {
+ case IT9135_V1_FW:
+ it913x_config.firmware_ver = 1;
+ it913x_config.adc_x2 = 1;
+ props->firmware = fw_it9135_v1;
+ break;
+ case IT9135_V2_FW:
+ it913x_config.firmware_ver = 1;
+ it913x_config.adc_x2 = 1;
+ props->firmware = fw_it9135_v2;
+ break;
+ case IT9137_FW:
+ default:
+ it913x_config.firmware_ver = 0;
+ it913x_config.adc_x2 = 0;
+ props->firmware = fw_it9137;
+ }
+
+ return 0;
+}
+
+#define TS_MPEG_PKT_SIZE 188
+#define EP_LOW 21
+#define TS_BUFFER_SIZE_PID (EP_LOW*TS_MPEG_PKT_SIZE)
+#define EP_HIGH 348
+#define TS_BUFFER_SIZE_MAX (EP_HIGH*TS_MPEG_PKT_SIZE)
+
static int it913x_identify_state(struct usb_device *udev,
struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc,
/* checnk for dual mode */
it913x_config.dual_mode = it913x_read_reg(udev, 0x49c5);
+ if (udev->speed != USB_SPEED_HIGH) {
+ props->adapter[0].fe[0].pid_filter_count = 5;
+ info("USB 1 low speed mode - connect to USB 2 port");
+ if (pid_filter > 0)
+ pid_filter = 0;
+ if (it913x_config.dual_mode) {
+ it913x_config.dual_mode = 0;
+ info("Dual mode not supported in USB 1");
+ }
+ } else /* For replugging */
+ if(props->adapter[0].fe[0].pid_filter_count == 5)
+ props->adapter[0].fe[0].pid_filter_count = 31;
+
/* TODO different remotes */
remote = it913x_read_reg(udev, 0x49ac); /* Remote */
if (remote == 0)
info("Dual mode=%x Remote=%x Tuner Type=%x", it913x_config.dual_mode
, remote, it913x_config.tuner_id_0);
+ /* Select Stream Buffer Size and pid filter option*/
+ if (pid_filter) {
+ props->adapter[0].fe[0].stream.u.bulk.buffersize =
+ TS_BUFFER_SIZE_MAX;
+ props->adapter[0].fe[0].caps &=
+ ~DVB_USB_ADAP_NEED_PID_FILTERING;
+ } else
+ props->adapter[0].fe[0].stream.u.bulk.buffersize =
+ TS_BUFFER_SIZE_PID;
+
+ if (it913x_config.dual_mode) {
+ props->adapter[1].fe[0].stream.u.bulk.buffersize =
+ props->adapter[0].fe[0].stream.u.bulk.buffersize;
+ props->num_adapters = 2;
+ if (pid_filter)
+ props->adapter[1].fe[0].caps =
+ props->adapter[0].fe[0].caps;
+ } else
+ props->num_adapters = 1;
+
+ ret = ite_firmware_select(udev, props);
+
if (firm_no > 0) {
*cold = 0;
return 0;
ret = it913x_wr_reg(udev, DEV_0,
GPIOH1_O, 0x0);
}
- props->num_adapters = 2;
- } else
- props->num_adapters = 1;
+ }
reg = it913x_read_reg(udev, IO_MUX_POWER_CLK);
if (it913x_config.dual_mode) {
ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
- ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x1);
+ if (it913x_config.firmware_ver == 1)
+ ret |= it913x_wr_reg(udev, DEV_0, 0xcfff, 0x1);
+ else
+ ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x1);
} else {
ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, 0x0);
- ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x0);
+ if (it913x_config.firmware_ver == 1)
+ ret |= it913x_wr_reg(udev, DEV_0, 0xcfff, 0x0);
+ else
+ ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x0);
}
*cold = 1;
return ret;
}
-
static int it913x_download_firmware(struct usb_device *udev,
const struct firmware *fw)
{
- int ret = 0, i;
- u8 packet_size, dlen;
+ int ret = 0, i = 0, pos = 0;
+ u8 packet_size, min_pkt;
u8 *fw_data;
- packet_size = 0x29;
-
ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_100);
info("FRM Starting Firmware Download");
- /* This uses scatter write firmware headers follow */
- /* 03 XX 00 XX = chip number? */
-
- for (i = 0; i < fw->size; i += packet_size) {
- if (i > 0)
- packet_size = 0x39;
- fw_data = (u8 *)(fw->data + i);
- dlen = ((i + packet_size) > fw->size)
- ? (fw->size - i) : packet_size;
- ret |= it913x_io(udev, WRITE_DATA, DEV_0,
- CMD_SCATTER_WRITE, 0, 0, fw_data, dlen);
- udelay(1000);
+
+ /* Multi firmware loader */
+ /* This uses scatter write firmware headers */
+ /* The firmware must start with 03 XX 00 */
+ /* and be the extact firmware length */
+
+ if (it913x_config.chip_ver == 2)
+ min_pkt = 0x11;
+ else
+ min_pkt = 0x19;
+
+ while (i <= fw->size) {
+ if (((fw->data[i] == 0x3) && (fw->data[i + 2] == 0x0))
+ || (i == fw->size)) {
+ packet_size = i - pos;
+ if ((packet_size > min_pkt) || (i == fw->size)) {
+ fw_data = (u8 *)(fw->data + pos);
+ pos += packet_size;
+ if (packet_size > 0)
+ ret |= it913x_io(udev, WRITE_DATA,
+ DEV_0, CMD_SCATTER_WRITE, 0,
+ 0, fw_data, packet_size);
+ udelay(1000);
+ }
+ }
+ i++;
}
- ret |= it913x_io(udev, WRITE_CMD, DEV_0,
- CMD_BOOT, 0, 0, NULL, 0);
+ ret |= it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0);
msleep(100);
/* Tuner function */
if (it913x_config.dual_mode)
ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
-
- ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0);
- ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0);
- if (it913x_config.dual_mode) {
- ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0);
- ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0);
+ else
+ ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0x68);
+
+ if ((it913x_config.chip_ver == 1) &&
+ (it913x_config.chip_type == 0x9135)) {
+ ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0);
+ ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0);
+ if (it913x_config.dual_mode) {
+ ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0);
+ ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0);
+ }
}
return (ret < 0) ? -ENODEV : 0;
static int it913x_frontend_attach(struct dvb_usb_adapter *adap)
{
struct usb_device *udev = adap->dev->udev;
+ struct it913x_state *st = adap->dev->priv;
int ret = 0;
- u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
- u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize;
- u8 tuner_id, tuner_type;
+ u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize / 4;
+ u8 pkt_size = 0x80;
+
+ if (adap->dev->udev->speed != USB_SPEED_HIGH)
+ pkt_size = 0x10;
+
+ it913x_config.adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
if (adap->id == 0)
- tuner_id = it913x_config.tuner_id_0;
- else
- tuner_id = it913x_config.tuner_id_1;
-
- /* TODO we always use IT9137 possible references here*/
- /* Documentation suggests don't care */
- switch (tuner_id) {
- case 0x51:
- case 0x52:
- case 0x60:
- case 0x61:
- case 0x62:
- default:
- case 0x38:
- tuner_type = IT9137;
- }
+ memcpy(&st->it913x_config, &it913x_config,
+ sizeof(struct ite_config));
adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
- &adap->dev->i2c_adap, adap_addr, adf, tuner_type);
+ &adap->dev->i2c_adap, adap_addr, &st->it913x_config);
if (adap->id == 0 && adap->fe_adap[0].fe) {
ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_LSB,
ep_size & 0xff);
ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8);
- ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, 0x80);
+ ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, pkt_size);
} else if (adap->id == 1 && adap->fe_adap[0].fe) {
ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x6f);
ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_LSB,
ep_size & 0xff);
ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8);
- ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, 0x80);
+ ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, pkt_size);
ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_EN, 0x1);
ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_SERIAL, 0x1);
ret = it913x_wr_reg(udev, DEV_1, TOP_HOSTB_SER_MODE, 0x1);
static struct usb_device_id it913x_table[] = {
{ USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) },
{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) },
+ { USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137) },
+ { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005) },
+ { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006) },
{} /* Terminating entry */
};
.endpoint = 0x04,
.u = {/* Keep Low if PID filter on */
.bulk = {
- .buffersize = 3584,
-
+ .buffersize =
+ TS_BUFFER_SIZE_PID,
}
}
}
.endpoint = 0x05,
.u = {
.bulk = {
- .buffersize = 3584,
-
+ .buffersize =
+ TS_BUFFER_SIZE_PID,
}
}
}
.rc_query = it913x_rc_query,
.rc_interval = IT913X_POLL,
.allowed_protos = RC_TYPE_NEC,
- .rc_codes = RC_MAP_KWORLD_315U,
+ .rc_codes = RC_MAP_MSI_DIGIVOX_III,
},
.i2c_algo = &it913x_i2c_algo,
- .num_device_descs = 2,
+ .num_device_descs = 5,
.devices = {
{ "Kworld UB499-2T T09(IT9137)",
{ &it913x_table[0], NULL },
{ "ITE 9135 Generic",
{ &it913x_table[1], NULL },
},
+ { "Sveon STV22 Dual DVB-T HDTV(IT9137)",
+ { &it913x_table[2], NULL },
+ },
+ { "ITE 9135(9005) Generic",
+ { &it913x_table[3], NULL },
+ },
+ { "ITE 9135(9006) Generic",
+ { &it913x_table[4], NULL },
+ },
}
};
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.07");
+MODULE_VERSION("1.22");
MODULE_LICENSE("GPL");
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / blobdiff