#define I2SR_IIF (1 << 1)
#define I2SR_RX_NO_AK (1 << 0)
-#ifdef CONFIG_SYS_I2C_BASE
-#define I2C_BASE CONFIG_SYS_I2C_BASE
-#else
+#if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE)
#error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
#endif
#endif
/* Divider value calculation */
- i2c_clk_rate = mxc_get_clock(MXC_IPG_PERCLK);
+ i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
div = (i2c_clk_rate + rate - 1) / rate;
if (div < i2c_clk_div[0][0])
clk_div = 0;
}
/*
- * Init I2C Bus
+ * Set I2C Bus speed
*/
-void i2c_init(int speed, int unused)
+int bus_i2c_set_bus_speed(void *base, int speed)
{
- struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
u8 clk_idx = i2c_imx_get_clk(speed);
u8 idx = i2c_clk_div[clk_idx][1];
/* Reset module */
writeb(0, &i2c_regs->i2cr);
writeb(0, &i2c_regs->i2sr);
-}
-
-/*
- * Set I2C Speed
- */
-int i2c_set_bus_speed(unsigned int speed)
-{
- i2c_init(speed, 0);
return 0;
}
/*
* Get I2C Speed
*/
-unsigned int i2c_get_bus_speed(void)
+unsigned int bus_i2c_get_bus_speed(void *base)
{
- struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
u8 clk_idx = readb(&i2c_regs->ifdr);
u8 clk_div;
for (clk_div = 0; i2c_clk_div[clk_div][1] != clk_idx; clk_div++)
;
- return mxc_get_clock(MXC_IPG_PERCLK) / i2c_clk_div[clk_div][0];
+ return mxc_get_clock(MXC_I2C_CLK) / i2c_clk_div[clk_div][0];
}
#define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
return 0;
}
+static int i2c_idle_bus(void *base);
+
static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
uchar chip, uint addr, int alen)
{
if (ret != -ERESTART)
writeb(0, &i2c_regs->i2cr); /* Disable controller */
udelay(100);
+ if (i2c_idle_bus(i2c_regs) < 0)
+ break;
}
printf("%s: give up i2c_regs=%p\n", __func__, i2c_regs);
return ret;
/*
* Read data from I2C device
*/
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
+ int len)
{
- struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
int ret;
unsigned int temp;
int i;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
ret = i2c_init_transfer(i2c_regs, chip, addr, alen);
if (ret < 0)
/*
* Write data to I2C device
*/
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+int bus_i2c_write(void *base, uchar chip, uint addr, int alen,
+ const uchar *buf, int len)
{
- struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
int ret;
int i;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
ret = i2c_init_transfer(i2c_regs, chip, addr, alen);
if (ret < 0)
return ret;
}
+struct i2c_parms {
+ void *base;
+ void *idle_bus_data;
+ int (*idle_bus_fn)(void *p);
+};
+
+struct sram_data {
+ unsigned curr_i2c_bus;
+ struct i2c_parms i2c_data[3];
+};
+
+/*
+ * For SPL boot some boards need i2c before SDRAM is initialized so force
+ * variables to live in SRAM
+ */
+static struct sram_data __attribute__((section(".data"))) srdata;
+
+void *get_base(void)
+{
+#ifdef CONFIG_SYS_I2C_BASE
+#ifdef CONFIG_I2C_MULTI_BUS
+ void *ret = srdata.i2c_data[srdata.curr_i2c_bus].base;
+ if (ret)
+ return ret;
+#endif
+ return (void *)CONFIG_SYS_I2C_BASE;
+#elif defined(CONFIG_I2C_MULTI_BUS)
+ return srdata.i2c_data[srdata.curr_i2c_bus].base;
+#else
+ return srdata.i2c_data[0].base;
+#endif
+}
+
+static struct i2c_parms *i2c_get_parms(void *base)
+{
+ int i = 0;
+ struct i2c_parms *p = srdata.i2c_data;
+ while (i < ARRAY_SIZE(srdata.i2c_data)) {
+ if (p->base == base)
+ return p;
+ p++;
+ i++;
+ }
+ printf("Invalid I2C base: %p\n", base);
+ return NULL;
+}
+
+static int i2c_idle_bus(void *base)
+{
+ struct i2c_parms *p = i2c_get_parms(base);
+ if (p && p->idle_bus_fn)
+ return p->idle_bus_fn(p->idle_bus_data);
+ return 0;
+}
+
+#ifdef CONFIG_I2C_MULTI_BUS
+unsigned int i2c_get_bus_num(void)
+{
+ return srdata.curr_i2c_bus;
+}
+
+int i2c_set_bus_num(unsigned bus_idx)
+{
+ if (bus_idx >= ARRAY_SIZE(srdata.i2c_data))
+ return -1;
+ if (!srdata.i2c_data[bus_idx].base)
+ return -1;
+ srdata.curr_i2c_bus = bus_idx;
+ return 0;
+}
+#endif
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ return bus_i2c_read(get_base(), chip, addr, alen, buf, len);
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ return bus_i2c_write(get_base(), chip, addr, alen, buf, len);
+}
+
/*
* Test if a chip at a given address responds (probe the chip)
*/
int i2c_probe(uchar chip)
{
- return i2c_write(chip, 0, 0, NULL, 0);
+ return bus_i2c_write(get_base(), chip, 0, 0, NULL, 0);
+}
+
+void bus_i2c_init(void *base, int speed, int unused,
+ int (*idle_bus_fn)(void *p), void *idle_bus_data)
+{
+ int i = 0;
+ struct i2c_parms *p = srdata.i2c_data;
+ if (!base)
+ return;
+ for (;;) {
+ if (!p->base || (p->base == base)) {
+ p->base = base;
+ if (idle_bus_fn) {
+ p->idle_bus_fn = idle_bus_fn;
+ p->idle_bus_data = idle_bus_data;
+ }
+ break;
+ }
+ p++;
+ i++;
+ if (i >= ARRAY_SIZE(srdata.i2c_data))
+ return;
+ }
+ bus_i2c_set_bus_speed(base, speed);
+}
+
+/*
+ * Init I2C Bus
+ */
+void i2c_init(int speed, int unused)
+{
+ bus_i2c_init(get_base(), speed, unused, NULL, NULL);
+}
+
+/*
+ * Set I2C Speed
+ */
+int i2c_set_bus_speed(unsigned int speed)
+{
+ return bus_i2c_set_bus_speed(get_base(), speed);
+}
+
+/*
+ * Get I2C Speed
+ */
+unsigned int i2c_get_bus_speed(void)
+{
+ return bus_i2c_get_bus_speed(get_base());
}
projects / platform / kernel / u-boot.git / blobdiff