static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
- u32 ic_tar = 0;
+ u32 ic_con, ic_tar = 0;
/* Disable the adapter */
__i2c_dw_enable_and_wait(dev, false);
/* if the slave address is ten bit address, enable 10BITADDR */
- if (dev->dynamic_tar_update_enabled) {
+ ic_con = dw_readl(dev, DW_IC_CON);
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
+ ic_con |= DW_IC_CON_10BITADDR_MASTER;
/*
* If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
- * mode has to be enabled via bit 12 of IC_TAR register,
- * otherwise bit 4 of IC_CON is used.
+ * mode has to be enabled via bit 12 of IC_TAR register.
+ * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
+ * detected from registers.
*/
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
- ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+ ic_tar = DW_IC_TAR_10BITADDR_MASTER;
} else {
- u32 ic_con = dw_readl(dev, DW_IC_CON);
-
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
- ic_con |= DW_IC_CON_10BITADDR_MASTER;
- else
- ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- dw_writel(dev, ic_con, DW_IC_CON);
+ ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
}
+ dw_writel(dev, ic_con, DW_IC_CON);
+
/*
* Set the slave (target) address and enable 10-bit addressing mode
* if applicable.
return dev->functionality;
}
-static struct i2c_algorithm i2c_dw_algo = {
+static const struct i2c_algorithm i2c_dw_algo = {
.master_xfer = i2c_dw_xfer,
.functionality = i2c_dw_func,
};
{
struct i2c_adapter *adap = &dev->adapter;
int r;
- u32 reg;
init_completion(&dev->cmd_complete);
if (r)
return r;
- r = i2c_dw_acquire_lock(dev);
- if (r)
- return r;
-
- /*
- * Test if dynamic TAR update is enabled in this controller by writing
- * to IC_10BITADDR_MASTER field in IC_CON: when it is enabled this
- * field is read-only so it should not succeed
- */
- reg = dw_readl(dev, DW_IC_CON);
- dw_writel(dev, reg ^ DW_IC_CON_10BITADDR_MASTER, DW_IC_CON);
-
- if ((dw_readl(dev, DW_IC_CON) & DW_IC_CON_10BITADDR_MASTER) ==
- (reg & DW_IC_CON_10BITADDR_MASTER)) {
- dev->dynamic_tar_update_enabled = true;
- dev_dbg(dev->dev, "Dynamic TAR update enabled");
- }
-
- i2c_dw_release_lock(dev);
-
snprintf(adap->name, sizeof(adap->name),
"Synopsys DesignWare I2C adapter");
adap->retries = 3;