Merge tag 'u-boot-imx-20200825' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[platform/kernel/u-boot.git] / drivers / i2c / Kconfig

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 4772db3..8ae54e1 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -12,18 +12,7 @@ config DM_I2C
          write and speed, is implemented with the bus drivers operations,
          which provide methods for bus setting and data transfer. Each chip
          device (bus child) info is kept as parent platdata. The interface
-         is defined in include/i2c.h. When i2c bus driver supports the i2c
-         uclass, but the device drivers not, then DM_I2C_COMPAT config can
-         be used as compatibility layer.
-
-config DM_I2C_COMPAT
-       bool "Enable I2C compatibility layer"
-       depends on DM
-       help
-         Enable old-style I2C functions for compatibility with existing code.
-         This option can be enabled as a temporary measure to avoid needing
-         to convert all code for a board in a single commit. It should not
-         be enabled for any board in an official release.
+         is defined in include/i2c.h.
 
 config I2C_CROS_EC_TUNNEL
        tristate "Chrome OS EC tunnel I2C bus"
@@ -82,6 +71,14 @@ config SYS_I2C_AT91
          i2c-gpio driver unless your system can cope with this limitation.
          Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
 
+config SYS_I2C_IPROC
+       bool "Broadcom I2C driver"
+       depends on DM_I2C
+       help
+         Broadcom I2C driver.
+         Add support for Broadcom I2C driver.
+         Say yes here to to enable the Broadco I2C driver.
+
 config SYS_I2C_FSL
        bool "Freescale I2C bus driver"
        depends on DM_I2C
@@ -91,11 +88,19 @@ config SYS_I2C_FSL
 
 config SYS_I2C_CADENCE
        tristate "Cadence I2C Controller"
-       depends on DM_I2C && (ARCH_ZYNQ || ARM64)
+       depends on DM_I2C
        help
          Say yes here to select Cadence I2C Host Controller. This controller is
          e.g. used by Xilinx Zynq.
 
+config SYS_I2C_CA
+       tristate "Cortina-Access I2C Controller"
+       depends on DM_I2C && CORTINA_PLATFORM
+       default n
+       help
+         Add support for the Cortina Access I2C host controller.
+         Say yes here to select Cortina-Access I2C Host Controller.
+
 config SYS_I2C_DAVINCI
        bool "Davinci I2C Controller"
        depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
@@ -328,6 +333,15 @@ config SYS_MXC_I2C8_SLAVE
         MXC I2C8 Slave
 endif
 
+config SYS_I2C_NEXELL
+       bool "Nexell I2C driver"
+       depends on DM_I2C
+       help
+         Add support for the Nexell I2C driver. This is used with various
+         Nexell parts such as S5Pxx18 series SoCs. All chips
+         have several I2C ports and all are provided, controlled by the
+         device tree.
+
 config SYS_I2C_OMAP24XX
        bool "TI OMAP2+ I2C driver"
        depends on ARCH_OMAP2PLUS || ARCH_K3
@@ -377,6 +391,16 @@ config SYS_I2C_SANDBOX
          bus. Devices can be attached to the bus using the device tree
          which specifies the driver to use.  See sandbox.dts as an example.
 
+config SYS_I2C_OCTEON
+       bool "Octeon II/III/TX/TX2 I2C driver"
+       depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) && DM_I2C
+       default y
+       help
+         Add support for the Marvell Octeon I2C driver. This is used with
+         various Octeon parts such as Octeon II/III and OcteonTX/TX2. All
+         chips have several I2C ports and all are provided, controlled by
+         the device tree.
+
 config SYS_I2C_S3C24X0
        bool "Samsung I2C driver"
        depends on ARCH_EXYNOS4 && DM_I2C
@@ -405,7 +429,7 @@ config SYS_I2C_STM32F7
 
 config SYS_I2C_TEGRA
        bool "NVIDIA Tegra internal I2C controller"
-       depends on TEGRA
+       depends on ARCH_TEGRA
        help
          Support for NVIDIA I2C controller available in Tegra SoCs.