the Winbond W83627EHF Super-I/O chip
Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2006 Yuan Mu (Winbond),
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
Shamelessly ripped from the w83627hf driver
Supports the following chips:
- Chip #vin #fan #pwm #temp chip_id man_id
- w83627ehf 10 5 4 3 0x88,0xa1 0x5ca3
+ Chip #vin #fan #pwm #temp chip IDs man ID
+ w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3
+ 0x8860 0xa1
+ w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
*/
#include <linux/module.h>
* Super-I/O constants and functions
*/
+/*
+ * The three following globals are initialized in w83627ehf_find(), before
+ * the i2c-isa device is created. Otherwise, they could be stored in
+ * w83627ehf_data. This is ugly, but necessary, and when the driver is next
+ * updated to become a platform driver, the globals will disappear.
+ */
static int REG; /* The register to read/write */
static int VAL; /* The value to read/write */
+/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This
+ * value is also used in w83627ehf_detect() to export a device name in sysfs
+ * (e.g. w83627ehf or w83627dhg) */
+static int w83627ehf_num_in;
#define W83627EHF_LD_HWM 0x0b
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
-#define SIO_W83627EHF_ID 0x8840
-#define SIO_ID_MASK 0xFFC0
+#define SIO_W83627EHF_ID 0x8850
+#define SIO_W83627EHG_ID 0x8860
+#define SIO_W83627DHG_ID 0xa020
+#define SIO_ID_MASK 0xFFF0
static inline void
superio_outb(int reg, int val)
* ISA constants
*/
-#define REGION_ALIGNMENT ~7
-#define REGION_OFFSET 5
-#define REGION_LENGTH 2
+#define IOREGION_ALIGNMENT ~7
+#define IOREGION_OFFSET 5
+#define IOREGION_LENGTH 2
#define ADDR_REG_OFFSET 5
#define DATA_REG_OFFSET 6
#define W83627EHF_REG_BANK 0x4E
#define W83627EHF_REG_CONFIG 0x40
-#define W83627EHF_REG_CHIP_ID 0x49
-#define W83627EHF_REG_MAN_ID 0x4F
+
+/* Not currently used:
+ * REG_MAN_ID has the value 0x5ca3 for all supported chips.
+ * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
+ * REG_MAN_ID is at port 0x4f
+ * REG_CHIP_ID is at port 0x58 */
static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
break;
case 4:
reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73)
- | ((data->fan_div[4] & 0x03) << 3)
+ | ((data->fan_div[4] & 0x03) << 2)
| ((data->fan_div[4] & 0x04) << 5);
w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
break;
}
/* Measured voltages and limits */
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < w83627ehf_num_in; i++) {
data->in[i] = w83627ehf_read_value(client,
W83627EHF_REG_IN(i));
data->in_min[i] = w83627ehf_read_value(client,
time */
if (data->fan[i] == 0xff
&& data->fan_div[i] < 0x07) {
- dev_dbg(&client->dev, "Increasing fan %d "
+ dev_dbg(&client->dev, "Increasing fan%d "
"clock divider from %u to %u\n",
- i, div_from_reg(data->fan_div[i]),
+ i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
w83627ehf_write_fan_div(client, i);
device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < w83627ehf_num_in; i++) {
device_remove_file(dev, &sda_in_input[i].dev_attr);
device_remove_file(dev, &sda_in_alarm[i].dev_attr);
device_remove_file(dev, &sda_in_min[i].dev_attr);
u8 fan4pin, fan5pin;
int i, err = 0;
- if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
+ if (!request_region(address + IOREGION_OFFSET, IOREGION_LENGTH,
w83627ehf_driver.driver.name)) {
err = -EBUSY;
goto exit;
client->flags = 0;
dev = &client->dev;
- strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
+ if (w83627ehf_num_in == 9)
+ strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE);
+ else /* just say ehf. 627EHG is 627EHF in lead-free packaging. */
+ strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
+
data->valid = 0;
mutex_init(&data->update_lock);
goto exit_remove;
}
- for (i = 0; i < 10; i++)
+ for (i = 0; i < w83627ehf_num_in; i++)
if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
|| (err = device_create_file(dev,
&sda_in_alarm[i].dev_attr))
exit_free:
kfree(data);
exit_release:
- release_region(address + REGION_OFFSET, REGION_LENGTH);
+ release_region(address + IOREGION_OFFSET, IOREGION_LENGTH);
exit:
return err;
}
if ((err = i2c_detach_client(client)))
return err;
- release_region(client->addr + REGION_OFFSET, REGION_LENGTH);
+ release_region(client->addr + IOREGION_OFFSET, IOREGION_LENGTH);
kfree(data);
return 0;
val = (superio_inb(SIO_REG_DEVID) << 8)
| superio_inb(SIO_REG_DEVID + 1);
- if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) {
+ switch (val & SIO_ID_MASK) {
+ case SIO_W83627DHG_ID:
+ w83627ehf_num_in = 9;
+ break;
+ case SIO_W83627EHF_ID:
+ case SIO_W83627EHG_ID:
+ w83627ehf_num_in = 10;
+ break;
+ default:
+ printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n",
+ val);
superio_exit();
return -ENODEV;
}
superio_select(W83627EHF_LD_HWM);
val = (superio_inb(SIO_REG_ADDR) << 8)
| superio_inb(SIO_REG_ADDR + 1);
- *addr = val & REGION_ALIGNMENT;
+ *addr = val & IOREGION_ALIGNMENT;
if (*addr == 0) {
superio_exit();
return -ENODEV;
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / blobdiff