Select this to enable PIO for Altera devices. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
+config BCM2835_GPIO
+ bool "BCM2835 GPIO driver"
+ depends on DM_GPIO
+
config BCM6345_GPIO
bool "BCM6345 GPIO driver"
depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM68360 || \
- ARCH_BCM6858 || ARCH_BCM63158)
+ ARCH_BCM6858 || ARCH_BCM63158 || \
+ ARCH_BCM6753)
help
This driver supports the GPIO banks on BCM6345 SoCs.
may be dedicated as a general purpose I/O or be assigned to
a function of an embedded peripheral.
+config ASPEED_GPIO
+ bool "Aspeed GPIO Driver"
+ help
+ Say yes here to support the Aspeed GPIO driver. The controller
+ is found in the AST2400, AST2500 and AST2600 BMC SoCs and
+ provides access to over 200 GPIOs on each chip.
+
config DA8XX_GPIO
bool "DA8xx GPIO Driver"
help
This driver supports the DA8xx GPIO controller
+config FXL6408_GPIO
+ bool "FXL6408 I2C GPIO expander driver"
+ depends on DM_GPIO && DM_I2C
+ help
+ This driver supports the Fairchild FXL6408 device. FXL6408 is a
+ fully configurable 8-bit I2C-controlled GPIO expander.
+
config INTEL_BROADWELL_GPIO
bool "Intel Broadwell GPIO driver"
depends on DM
help
This driver supports CREG GPIOs on Synopsys HSDK SOC.
+config KIRKWOOD_GPIO
+ bool "Kirkwood GPIO driver"
+ help
+ This drdiver supports GPIOs on Kirkwood platforms
+
config LPC32XX_GPIO
bool "LPC32XX GPIO driver"
depends on DM
into a number of banks each with 32 GPIOs. The GPIOs for a device are
defined in the device tree with one node for each bank.
+config ZYNQMP_GPIO_MODEPIN
+ bool "ZynqMP gpio modepin"
+ depends on DM_GPIO
+ help
+ This config enables the ZynqMP gpio modepin driver. ZynqMP modepin
+ driver will set and get the status of PS_MODE pins. These modepins
+ are accessed using xilinx firmware. In modepin register, [3:0] bits
+ set direction, [7:4] bits read IO, [11:8] bits set/clear IO.
+
+config SL28CPLD_GPIO
+ bool "Kontron sl28cpld GPIO driver"
+ depends on DM_GPIO && SL28CPLD
+ help
+ Support GPIO access on Kontron sl28cpld board management controllers.
+
+config SLG7XL45106_I2C_GPO
+ bool "slg7xl45106 i2c gpo expander"
+ depends on DM_GPIO
+ help
+ Support for slg7xl45106 i2c gpo expander. It is an i2c based
+ 8-bit gpo expander, all gpo lines are controlled by writing
+ value into data register.
+
endif