sandbox: Support booting from TPL to SPL

[platform/kernel/u-boot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index dab5c18..fb38b67 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,6 +1,4 @@
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
+# SPDX-License-Identifier: GPL-2.0+
 
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
@@ -8,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
 obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
@@ -16,10 +14,13 @@ obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
 obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
 obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
 obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
+obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
+obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
 
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
@@ -29,13 +30,15 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
+obj-$(CONFIG_SPL_DM_RESET) += reset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
 obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
-obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
 obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
 obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
@@ -50,6 +53,7 @@ obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
 obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
 obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
+obj-$(CONFIG_SPL_THERMAL) += thermal/
 
 endif
 endif
@@ -67,9 +71,11 @@ obj-y += ata/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
+obj-y += board/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
+obj-$(CONFIG_FASTBOOT) += fastboot/
 obj-y += firmware/
 obj-$(CONFIG_FPGA) += fpga/
 obj-y += misc/
@@ -78,6 +84,7 @@ obj-$(CONFIG_NVME) += nvme/
 obj-y += pcmcia/
 obj-y += dfu/
 obj-$(CONFIG_X86) += pch/
+obj-y += phy/allwinner/
 obj-y += phy/marvell/
 obj-y += rtc/
 obj-y += scsi/
@@ -95,9 +102,13 @@ obj-y += pwm/
 obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
+obj-y += smem/
 obj-y += soc/
-obj-$(CONFIG_REMOTEPROC) += remoteproc/
 obj-y += thermal/
+obj-$(CONFIG_TEE) += tee/
+obj-y += axi/
+obj-$(CONFIG_W1) += w1/
+obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
 
 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 endif