Revert "serial: bcm283x_mu: Refactor RX buffer"

[platform/kernel/u-boot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index ac2d83a..efc2a4a 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+obj-$(CONFIG_$(SPL_TPL_)BIOSEMU) += bios_emulator/
 obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
 obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
@@ -9,6 +10,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM) += core/
 obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/
 obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/
 obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
+obj-$(CONFIG_$(SPL_TPL_)EXTCON) += extcon/
 obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/
 obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/
 obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
@@ -18,7 +20,6 @@ obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/
 obj-y += mtd/
-obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/
 obj-$(CONFIG_$(SPL_TPL_)ETH) += net/
 obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
 obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
@@ -35,8 +36,12 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
 obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
 obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
 obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
+obj-$(CONFIG_$(SPL_)NVME) += nvme/
 obj-$(CONFIG_XEN) += xen/
 obj-$(CONFIG_$(SPL_)FPGA) += fpga/
+obj-$(CONFIG_$(SPL_)VIDEO) += video/
+
+obj-y += bus/
 
 ifndef CONFIG_TPL_BUILD
 ifndef CONFIG_VPL_BUILD
@@ -58,7 +63,6 @@ obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST) += usb/host/
-obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA) += ata/ scsi/
 obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
@@ -77,9 +81,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
 obj-y += adc/
 obj-y += ata/
-obj-y += bus/
 obj-$(CONFIG_DM_DEMO) += demo/
-obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
 obj-y += cache/
 obj-$(CONFIG_CPU) += cpu/
@@ -88,6 +90,7 @@ obj-$(CONFIG_FASTBOOT) += fastboot/
 obj-$(CONFIG_FWU_MDATA) += fwu-mdata/
 obj-y += misc/
 obj-$(CONFIG_MMC) += mmc/
+obj-$(CONFIG_MULTIPLEXER) += mux/
 obj-$(CONFIG_NVME) += nvme/
 obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
 obj-y += dfu/
@@ -97,12 +100,12 @@ obj-y += rtc/
 obj-y += scsi/
 obj-y += sound/
 obj-y += spmi/
-obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
 obj-$(CONFIG_U_QE) += qe/
 obj-y += mailbox/
 obj-y += memory/
+obj-y += mfd/
 obj-y += mtd/
 obj-y += pwm/
 obj-y += reset/
@@ -112,6 +115,7 @@ obj-y += iommu/
 obj-y += smem/
 obj-y += thermal/
 obj-$(CONFIG_TEE) += tee/
+obj-$(CONFIG_ARM_FFA_TRANSPORT) += firmware/arm-ffa/
 obj-y += axi/
 obj-y += ufs/
 obj-$(CONFIG_W1) += w1/