Prepare v2023.01-rc4

[platform/kernel/u-boot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index fd218c9..6f1de58 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,9 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
+obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
 obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/
+obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/
 obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
 obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/
 obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/
@@ -12,48 +16,43 @@ obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C) += i2c/
 obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
-obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
+obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/
 obj-y += mtd/
 obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/
-obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
+obj-$(CONFIG_$(SPL_TPL_)ETH) += net/
+obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
 obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
 obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
+obj-$(CONFIG_$(SPL_TPL_)POWER) += power/
 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
-obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
-obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
+obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/
+obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/
+obj-$(CONFIG_$(SPL_TPL_)SPI) += spi/
 obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
 obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
 obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
 obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
 obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
-obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
 obj-$(CONFIG_XEN) += xen/
 obj-$(CONFIG_$(SPL_)FPGA) += fpga/
+obj-y += bus/
 
 ifndef CONFIG_TPL_BUILD
+ifndef CONFIG_VPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
-obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
-obj-$(CONFIG_SPL_CACHE_SUPPORT) += cache/
 obj-$(CONFIG_SPL_CPU) += cpu/
 obj-$(CONFIG_SPL_CRYPTO) += crypto/
-obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
 obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
-obj-$(CONFIG_SPL_POWER) += power/ power/pmic/
-obj-$(CONFIG_SPL_POWER) += power/regulator/
-obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
+obj-$(CONFIG_ARCH_IMX9) += ddr/imx/imx9/
 obj-$(CONFIG_SPL_DM_RESET) += reset/
-obj-$(CONFIG_SPL_DMA) += dma/
-obj-$(CONFIG_SPL_ETH) += net/
-obj-$(CONFIG_SPL_ETH) += net/phy/
-obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW) += usb/musb-new/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
@@ -61,17 +60,17 @@ obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
-obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
-obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
+obj-$(CONFIG_SPL_SATA) += ata/ scsi/
+obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
 endif
 endif
+endif
 
 ifdef CONFIG_TPL_BUILD
 
-obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/
-obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/
 
 endif
 
@@ -79,15 +78,14 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
 obj-y += adc/
 obj-y += ata/
-obj-y += bus/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
-obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-y += cache/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
 obj-$(CONFIG_FASTBOOT) += fastboot/
+obj-$(CONFIG_FWU_MDATA) += fwu-mdata/
 obj-y += misc/
 obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
@@ -109,6 +107,7 @@ obj-y += mtd/
 obj-y += pwm/
 obj-y += reset/
 obj-y += input/
+obj-y += iommu/
 # SOC specific infrastructure drivers.
 obj-y += smem/
 obj-y += thermal/
@@ -119,6 +118,7 @@ obj-$(CONFIG_W1) += w1/
 obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
 
 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
+obj-$(CONFIG_FUZZ) += fuzz/
 obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
 obj-$(CONFIG_DM_RNG) += rng/
 endif