dracut.sh: recognize swap entries in fstab with mountpoint "none"

[platform/upstream/dracut.git] / dracut.conf.5.asc

diff --git a/dracut.conf.5.asc b/dracut.conf.5.asc
index 89bbf61..a32516c 100644 (file)
--- a/dracut.conf.5.asc
+++ b/dracut.conf.5.asc
@@ -10,17 +10,24 @@ dracut.conf - configuration file(s) for dracut
 
 SYNOPSIS
 --------
-_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_
+_/etc/dracut.conf_ _/etc/dracut.conf.d/*.conf_  _/usr/lib/dracut/dracut.conf.d/*.conf_
 
 Description
 -----------
 _dracut.conf_ is loaded during the initialisation phase of dracut. Command line
-parameter will overwrite any values set here. _dracut.conf.d/*.conf_ files are
-read in alphanumerical order and will overwrite parameters set in
+parameter will overwrite any values set here.
+
+_*.conf_ files are read from /usr/lib/dracut/dracut.conf.d and /etc/dracut.conf.d.
+Files with the same name in /etc/dracut.conf.d will replace files in /usr/lib/dracut/dracut.conf.d.
+The files are then read in alphanumerical order and will overwrite parameters set in
 _/etc/dracut.conf_. Each line specifies an attribute and a value. A '#'
 indicates the beginning of a comment; following characters, up to the end of the
 line are not interpreted.
 
+dracut command line options will overwrite any values set here.
+
+Configuration files must have the extension .conf; other extensions are ignored.
+
 *dracutmodules+=*" __<dracut modules>__ "::
     Specify a space-separated list of dracut modules to call when building the
     initramfs. Modules are located in _/usr/lib/dracut/modules.d_.
@@ -44,10 +51,6 @@ line are not interpreted.
     Specify a space-separated list of kernel modules not to add to the
     initramfs. The kernel modules have to be specified without the ".ko" suffix.
 
-*install_items+=*" __<kernel modules>__ "::
-    Specify a space-separated list of files, which are added to the initramfs
-    image.
-
 *filesystems+=*" __<filesystem names>__ "::
     Specify a space-separated list of kernel filesystem modules to exclusively
     include in the generic initramfs.
@@ -68,6 +71,11 @@ line are not interpreted.
     Host-Only mode: Install only what is needed for booting the local host
     instead of a generic host and generate host-specific configuration.
 
+*persistent_policy=*"__<policy>__"::
+    Use _<policy>_ to address disks and partitions.
+    _<policy>_ can be any directory name found in /dev/disk.
+    E.g. "by-uuid", "by-label"
+
 *tmpdir=*"__<temporary directory>__"::
     Specify temporary directory to use.
 
@@ -82,6 +90,11 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *add_fstab+=*" __<filename>__ "::
     Add entries of __<filename>__ to the initramfs /etc/fstab.
 
+*add_device+=*" __<device>__ "::
+    Bring up _<device>_ in initramfs, _<device>_ should be the device name.
+    This can be useful in hostonly mode for resume support when your swap is on
+    LVM an encrypted partition.
+
 *mdadmconf=*"__{yes|no}__"::
     Include local _/etc/mdadm.conf_ (default=yes)
 
@@ -97,15 +110,21 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *nofscks=*"__{yes|no}__"::
     If specified, inhibit installation of any fsck tools.
 
-*ro_mnt*
+*ro_mnt=*"__{yes|no}__"::
     Mount _/_ and _/usr_ read-only by default.
 
+*kernel_cmdline=*"__parameters__"::
+    Specify default kernel command line parameters
+
 *kernel_only=*"__{yes|no}__"::
     Only install kernel drivers and firmware files. (default=no)
 
 *no_kernel=*"{yes|no}"::
     Do not install kernel drivers and firmware files (default=no)
 
+*early_microcode=*"{yes|no}"::
+    Combine early microcode with ramdisk (default=no)
+
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
 
@@ -119,16 +138,16 @@ If chrooted to another root other than the real root device, use --fstab and pro
     Path to log file.
 
 *show_modules=*"__{yes|no}__"::
-    Print included module's name to standard output during build.
+    Print the name of the included modules to standard output during build.
 
 Files
 -----
 _/etc/dracut.conf_::
     Old configuration file. You better use your own file in
-    _/etc/dracut/conf.d/_.
+    _/etc/dracut.conf.d/_.
 
-_/etc/dracut/conf.d/_::
-    Any _/etc/dracut/conf.d/*.conf_ file can overwrite the values in
+_/etc/dracut.conf.d/_::
+    Any _/etc/dracut.conf.d/*.conf_ file can overwrite the values in
     _/etc/dracut.conf_. The configuration files are read in alphanumerical
     order.