Building libmraa {#building}
===============
-libmraa uses cmake in order to make compilation relatively painless. Cmake runs
-build out of tree so the recommended way is to clone from git and make a build/
+libmraa uses cmake in order to make compilation relatively painless. CMake runs
+build out of tree so the recommended way is to clone from git and make a `build/`
directory inside the clone directory.
## Build dependencies
* [node.js](http://nodejs.org) 0.10.x or 0.12.x (you'll need not just the interpreter but nodejs-dev)
* [CMake](http://cmake.org) 2.8.8+
+For Debian-like distros the below command installs the basic set:
+
+```bash
+sudo apt-get install git build-essential swig3.0 python-dev nodejs-dev cmake
+```
+
To build the documentation you'll also need:
* [Doxygen](http://www.stack.nl/~dimitri/doxygen/) 1.8.9.1+
-* [Graphviz](http://graphviz.org/) 2+ (For doxygen graph generation)
+* [Graphviz](http://graphviz.org/) 2+ (For Doxygen graph generation)
* [Sphinx](http://sphinx-doc.org/) 1.1.3+ (For Python docs)
file an issue with the full output of `cmake ..` and `make` or however far you
got.
+After that you can install built files (into default path) by running:
+
+
+```bash
+sudo make install
+```
+
+See flags for adjusting install paths in the section below.
+
+Currently our install logic puts Python bindings into standard paths, which
+do not work on Debian due to their
+ [policy](http://www.debian.org/doc/packaging-manuals/python-policy/ch-python.html#s-paths).
+
+We are working on a permanent solution, in the meanwhile please use this command
+after `make install` to link installed modules where Debian's Python expects them:
+
+```bash
+sudo ln -s <your install prefix, e.g. /usr>/lib/python2.7/site-packages/* /usr/lib/python2.7/dist-packages
+```
+
+Same approach works for Python 3, you'll just need to adjust the version number
+in the path accordingly.
+
## Configuration flags
-Our cmake configure has a number of options, cmake-gui or ccmake (cmake -i is
+Our CMake configuration has a number of options, `cmake-gui` or `ccmake` (`cmake -i` is
no longer with us :() can show you all the options. A few of the more common
-ones are listed below. Note that when the option starts with CMAKE_ it's an
-option that is made available by cmake and will be similar in all cmake
-projects. You need to add them after `cmake` but before `..`.
+ones are listed below. Note that when the option starts with `CMAKE_` it's an
+option that is made available by CMake and will be similar in all CMake
+projects. You need to add them after `cmake` but before `..`
A few recommended options:
-Changing install path from /usr/local to /usr:
- -DCMAKE_INSTALL_PREFIX:PATH=/usr
-Building debug build - adds -g and disables optimisations - this will force a
+Changing install path from `/usr/local` to `/usr`:
+ `-DCMAKE_INSTALL_PREFIX:PATH=/usr`
+
+Building debug build - adds `-g` and disables optimisations - this will force a
full rebuild:
- -DCMAKE_BUILD_TYPE=DEBUG
+ `-DCMAKE_BUILD_TYPE=DEBUG`
-Using clang instead of gcc:
- -DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++
+Using `clang` instead of `gcc`:
+ `-DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++`
-Building with an older version of SWIG (< 3.0.2) requires the disabling of javascript:
- -DBUILDSWIGNODE=OFF
+Building with an older version of SWIG (< 3.0.2) requires the disabling of JavaScript:
+ `-DBUILDSWIGNODE=OFF`
-Disabling python module building:
- -DBUILDSWIGPYTHON=OFF
+Disabling Python module building:
+ `-DBUILDSWIGPYTHON=OFF`
Building doc, this will require [SPHINX](http://sphinx-doc.org) &
[Doxygen](http://doxygen.org):
- -DBUILDDOC=ON
+ `-DBUILDDOC=ON`
-Building with python3 (careful you need to clear cmake cache between python
+Building with Python 3 (careful you need to clear CMake cache between Python
version switches!)
- -DBUILDPYTHON3=ON
+ `-DBUILDPYTHON3=ON`
-Override build architecture (this is useful because on x86 arm code is not
+Override build architecture (this is useful because on x86 ARM code is not
compiled so use this flag to force the target arch)
- -DBUILDARCH=arm
+ `-DBUILDARCH=arm`
## Dependencies continued
You'll need at least SWIG version 3.0.2 and we recommend 3.0.5 to build the
-javascript & python modules. If your version of SWIG is older than this then
-please see above for disabling SWIGNODE. Otherwise you will get a weird build
-failure when building the javascript module. The python module builds with SWIG
+JavaScript & Python modules. If your version of SWIG is older than this then
+please see above for disabling `SWIGNODE`. Otherwise you will get a weird build
+failure when building the JavaScript module. The Python module builds with SWIG
2.x.
During the build, we'll assume you're building from git, note that if you
-compile with git installed your version of mraa will be tagged -dirty. This
-simply means git wasn't installed or that you where building form a tarball.
-You can modify build/src/version.c before running make if this is incorrect.
-The instructions listed here all assume that build/ is an empty dir that lives
+compile with `git` installed your version of mraa will be tagged `-dirty`. This
+simply means `git` wasn't installed or that you where building from a tarball.
+You can modify `build/src/version.c` before running `make` if this is incorrect.
+The instructions listed here all assume that `build/` is an empty dir that lives
inside the cloned repository of mraa.
-If you have multiple versions of python then mraa can get confused, we
-recommend using virtualenv to select which version of python you want. We test
-2.7 the most but SWIG will generate valid 3.x python code but we do not
+If you have multiple versions of Python then mraa can get confused, we
+recommend using virtualenv to select which version of Python you want. We test
+2.7 the most but SWIG will generate valid 3.x Python code but we do not
generally support building both at once.
-## Using a yocto/oe toolchain
+## Using a Yocto/OE toolchain
-In order to compile with a yocto/oe toolchain use the following toolchain file.
-This works well on the edison 1.6 SDK. First source the environment file, then
-use our cmake toolchain file.
+In order to compile with a Yocto/OE toolchain use the following toolchain file.
+This works well on the Edison 1.7.2 SDK. First source the environment file, then
+use our CMake toolchain file.
~~~~~~~~~~~~~{.sh}
-source /opt/poky-edison/1.6/environment-setup-core2-32-poky-linux
+source /opt/poky-edison/1.7.2/environment-setup-core2-32-poky-linux
mkdir build
cmake -DCMAKE_TOOLCHAIN_FILE=../cmake/Toolchains/oe-sdk_cross.cmake ..
make
~~~~~~~~~~~~~
-## Using coverity
+## Using Coverity
-Static analysis is routinely performed using coverity on libmraa's codebase.
-This is the procedure to submit a build to coverity. You'll need to install
-coverity-submit for your OS.
+Static analysis is routinely performed using Coverity on libmraa's codebase.
+This is the procedure to submit a build to Coverity. You'll need to install
+`coverity-submit` for your OS.
~~~~~~~~~~~~~{.sh}
mkdir covbuild/ && cd covbuild
~~~~~~~~~~~~~
## Building Java bindings
-Have JAVA_HOME set to JDK install directory. Most distributions set this from /etc/profile.d/ and have a way of switching between alternatives. We support both OpenJDK and Oracle's JDK. On Arch Linux with openjdk8 you'll have to set this yourself like this:
+Have JAVA_HOME set to JDK install directory. Most distributions set this from `/etc/profile.d/`
+ and have a way of switching between alternatives. We support both OpenJDK and Oracle's JDK.
+ On Arch Linux with OpenJDK 8 you'll have to set this yourself like this:
~~~~~~~~~~~~~{.sh}
export JAVA_HOME=/usr/lib/jvm/default/
~~~~~~~~~~~~~
-Then use the cmake configuration flag:
- -DBUILDSWIGJAVA=ON
-To compile Example.java
+Then use the CMake configuration flag:
+ `-DBUILDSWIGJAVA=ON`
+To compile `Example.java`
~~~~~~~~~~~~~{.sh}
javac -cp $DIR_WHERE_YOU_INSTALLED_MRAA/mraa.jar:. Example.java
~~~~~~~~~~~~~
-To run, make sure libmraajava.so is in LD_LIBRARY_PATH
+To run, make sure `libmraajava.so` is in `LD_LIBRARY_PATH`
~~~~~~~~~~~~~{.sh}
jave -cp $DIR_WHERE_YOU_INSTALLED_MRAA/mraa.jar:. Example
~~~~~~~~~~~~~
-## Building an IPK/RPM package using cpack
+## Building an IPK/RPM package using `cpack`
-You can get cpack to generate an IPK or RPM package fairly easily if you have
+You can get `cpack` to generate an IPK or RPM package fairly easily if you have
the correct packaging tools
~~~~~~~~~~~~~{.sh}
make package
~~~~~~~~~~~~~
-To use RPM simply enable the RPM option. You'll need rpmbuild installed on your
+To use RPM simply enable the RPM option. You'll need `rpmbuild` installed on your
build machine.
~~~~~~~~~~~~~{.sh}