mkimage \- Generate image for U-Boot
.SH SYNOPSIS
.B mkimage
-.RB [\fIoptions\fP]
+.RB "\-l [" "uimage file name" "]"
+
+.B mkimage
+.RB [\fIoptions\fP] " \-f [" "image tree source file" "]" " [" "uimage file name" "]"
+
+.B mkimage
+.RB [\fIoptions\fP] " \-F [" "uimage file name" "]"
+
+.B mkimage
+.RB [\fIoptions\fP] " (legacy mode)"
+
.SH "DESCRIPTION"
The
.B mkimage
The new
.I FIT (Flattened Image Tree) format
allows for more flexibility in handling images of various types and also
-enhances integrity protection of images with stronger checksums.
+enhances integrity protection of images with stronger checksums. It also
+supports verified boot.
.SH "OPTIONS"
Pass \-h as the compression to see the list of supported compression type.
.TP
-.BI "\-a [" "load addess" "]"
+.BI "\-a [" "load address" "]"
Set load address with a hex number.
.TP
Set entry point with a hex number.
.TP
+.BI "\-l"
+List the contents of an image.
+
+.TP
.BI "\-n [" "image name" "]"
Set image name to 'image name'.
.B Create FIT image:
.TP
+.BI "\-b [" "device tree file" "]
+Appends the device tree binary file (.dtb) to the FIT.
+
+.TP
+.BI "\-c [" "comment" "]"
+Specifies a comment to be added when signing. This is typically a useful
+message which describes how the image was signed or some other useful
+information.
+
+.TP
.BI "\-D [" "dtc options" "]"
Provide special options to the device tree compiler that is used to
create the image.
.TP
-.BI "\-f [" "image tree source file" "]"
+.BI "\-E
+After processing, move the image data outside the FIT and store a data offset
+in the FIT. Images will be placed one after the other immediately after the
+FIT, with each one aligned to a 4-byte boundary. The existing 'data' property
+in each image will be replaced with 'data-offset' and 'data-size' properties.
+A 'data-offset' of 0 indicates that it starts in the first (4-byte aligned)
+byte after the FIT.
+
+.TP
+.BI "\-f [" "image tree source file" " | " "auto" "]"
Image tree source file that describes the structure and contents of the
FIT image.
+This can be automatically generated for some simple cases.
+Use "-f auto" for this. In that case the arguments -d, -A, -O, -T, -C, -a
+and -e are used to specify the image to include in the FIT and its attributes.
+No .its file is required.
+
+.TP
+.BI "\-F"
+Indicates that an existing FIT image should be modified. No dtc
+compilation is performed and the \-f flag should not be given.
+This can be used to sign images with additional keys after initial image
+creation.
+
+.TP
+.BI "\-i [" "ramdisk_file" "]"
+Appends the ramdisk file to the FIT.
+
+.TP
+.BI "\-k [" "key_directory" "]"
+Specifies the directory containing keys to use for signing. This directory
+should contain a private key file <name>.key for use with signing and a
+certificate <name>.crt (containing the public key) for use with verification.
+
+.TP
+.BI "\-K [" "key_destination" "]"
+Specifies a compiled device tree binary file (typically .dtb) to write
+public key information into. When a private key is used to sign an image,
+the corresponding public key is written into this file for for run-time
+verification. Typically the file here is the device tree binary used by
+CONFIG_OF_CONTROL in U-Boot.
+
+.TP
+.BI "\-p [" "external position" "]"
+Place external data at a static external position. See \-E. Instead of writing
+a 'data-offset' property defining the offset from the end of the FIT, \-p will
+use 'data-position' as the absolute position from the base of the FIT.
+
+.TP
+.BI "\-r
+Specifies that keys used to sign the FIT are required. This means that they
+must be verified for the image to boot. Without this option, the verification
+will be optional (useful for testing but not for release).
+
.SH EXAMPLES
List image information:
.nf
.B mkimage -f kernel.its kernel.itb
.fi
+.P
+Create FIT image with compressed kernel and sign it with keys in the
+/public/signing-keys directory. Add corresponding public keys into u-boot.dtb,
+skipping those for which keys cannot be found. Also add a comment.
+.nf
+.B mkimage -f kernel.its -k /public/signing-keys -K u-boot.dtb \\\\
+.br
+.B -c """Kernel 3.8 image for production devices""" kernel.itb
+.fi
+
+.P
+Update an existing FIT image, signing it with additional keys.
+Add corresponding public keys into u-boot.dtb. This will resign all images
+with keys that are available in the new directory. Images that request signing
+with unavailable keys are skipped.
+.nf
+.B mkimage -F -k /secret/signing-keys -K u-boot.dtb \\\\
+.br
+.B -c """Kernel 3.8 image for production devices""" kernel.itb
+.fi
+
+.P
+Create a FIT image containing a kernel, using automatic mode. No .its file
+is required.
+.nf
+.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\
+.br
+.B -c """Kernel 4.4 image for production devices""" -d vmlinuz kernel.itb
+.fi
+.P
+Create a FIT image containing a kernel and some device tree files, using
+automatic mode. No .its file is required.
+.nf
+.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\
+.br
+.B -c """Kernel 4.4 image for production devices""" -d vmlinuz \\\\
+.B -b /path/to/rk3288-firefly.dtb -b /path/to/rk3288-jerry.dtb kernel.itb
+.fi
.SH HOMEPAGE
http://www.denx.de/wiki/U-Boot/WebHome
.PP
.SH AUTHOR
This manual page was written by Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-and Wolfgang Denk <wd@denx.de>
+and Wolfgang Denk <wd@denx.de>. It was updated for image signing by
+Simon Glass <sjg@chromium.org>.