Manager hierarchy
-*****************
+=================
-Service name org.moblin.connman
-Interface name org.moblin.connman.Manager
+Service net.connman
+Interface net.connman.Manager
Object path /
-Methods array{object} ListElements()
+Methods dict GetProperties()
+
+ Returns all global system properties. See the
+ properties section for available properties.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ void SetProperty(string name, variant value)
+
+ Changes the value of the specified property. Only
+ properties that are listed as read-write are
+ changeable. On success a PropertyChanged signal
+ will be emitted.
+
+ Possible Errors: [service].Error.InvalidArguments
+ [service].Error.InvalidProperty
+
+ array{object,dict} GetTechnologies()
+
+ Returns a list of tuples with technology object
+ path and dictionary of technology properties.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ array{object,dict} GetServices()
+
+ Returns a sorted list of tuples with service
+ object path and dictionary of service properties.
+
+ This list will not contain sensitive information
+ like passphrases etc.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ array{object,dict} GetPeers() [experimental]
+
+ Returns a sorted list of tuples with peer object path
+ and dictionary of peer properties
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ array{string} GetTetheringClients() [experimental]
+
+ Returns a sorted list of MAC addresses of clients
+ connected to tethered technologies.
+
+ object ConnectProvider(dict provider) [deprecated]
+
+ Connect to a VPN specified by the given provider
+ properties.
+
+ When successful this method will return the object
+ path of the VPN service object.
+
+ This method can also be used to connect to an
+ already existing VPN.
+
+ This method call will only return in case of an
+ error or when the service is fully connected. So
+ setting a longer D-Bus timeout might be a really
+ good idea.
+
+ When 'SessionMode' property is enabled, this method
+ call is disallowed.
+
+ This API is deprecated and should not be used.
+ The VPN configuration API is provided by ConnMan
+ VPN daemon and user should use that one instead.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ void RemoveProvider(object path) [deprecated]
+
+ Remove a VPN specified by the object path.
+
void RegisterAgent(object path)
+
+ Register new agent for handling user requests.
+
+ Possible Errors: [service].Error.InvalidArguments
+
void UnregisterAgent(object path)
-Signals ElementAdded(object)
- ElementRemoved(object)
-
-
-Method: ListElements
-====================
-This method lists all available interfaces. The return value is an array of
-object paths. Every attached network interface (eth0, wlan0 etc.) of the
-system is presented by an object path with additional interfaces on it. The
-main interface is org.freedesktop.connman.Interface.
-
-Method: RegisterAgent
-=====================
-This method allows the user interace to register an agent. There can be only
-one agent registered at a time. The parameter of the method is the object
-path the agent has been registered for the callback method. The agent has
-to implement org.moblin.connman.Agent interface on this object path.
-
-Method: UnregisterAgent
-=======================
-This method unregisters a previously registered agent. In case the agent
-application exits the core will automatically unregister the agent. However
-for a clean agent application it is important to call the unregister method.
-
-Signal: ElementAdded
-====================
-This signal is emitted every time a new element has been added by the
-core and successfully activated. The signal is also emitted on startup
-or at anytime at runtime in case of hotplug devices.
-
-Signal: ElementRemoved
-======================
-This signal is emitted every time an element has been removed. This can
-happen at any time in case of hotplug devices. When the system shuts down,
-this signal is also emitted.
+ Unregister an existing agent.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ void RegisterCounter(object path, uint32 accuracy, uint32 period) [experimental]
+
+ Register a new counter for user notifications.
+
+ The accuracy is specified in kilo-bytes and defines
+ a threshold for counter updates. Together with the
+ period value it defines how often user space needs
+ to be updated. The period value is in seconds.
+
+ This interface is not meant for time tracking. If
+ the time needs to be tracked down to the second, it
+ is better to have a real timer running inside the
+ application than using this interface.
+
+ Also getting notified for every kilo-byte is a bad
+ choice (even if the interface supports it). Something
+ like 10 kilo-byte units or better 1 mega-byte seems
+ to be a lot more reasonable and better for the user.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ void UnregisterCounter(object path) [experimental]
+
+ Unregister an existing counter.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ object CreateSession(dict settings, object notifier) [experimental]
+
+ Create a new session for the application. Every
+ application can create multiple session with
+ different settings. The settings are described
+ as part of the session interface.
+
+ The notifier allows asynchronous notification about
+ session specific changes. These changes can be
+ for online/offline state or IP address changes or
+ similar things the application is required to
+ handle.
+
+ Every application should at least create one session
+ to inform about its requirements and it purpose.
+
+ void DestroySession(object session) [experimental]
+
+ Remove the previously created session.
+
+ If an application exits unexpectatly the session
+ will be automatically destroyed.
+
+ object path, dict, fd RequestPrivateNetwork(dict options)
+ [experimental]
+
+ Request a new Private Network, which includes the
+ creation of a tun/tap interface, and IP
+ configuration, NAT and IP forwarding on that
+ interface.
+ An object path, a dictionary and a file descriptor
+ with IP settings are returned.
+
+ Possible Errors: [service].Error.InvalidArguments
+ [service].Error.NotSupported
+
+ void ReleasePrivateNetwork(object path) [experimental]
+
+ Releases a private network.
+
+ Possible Errors: [service].Error.InvalidArguments
+
+ void RegisterPeerService(dict specification, boolean master)
+ [experimental]
+
+ Registers a local P2P Peer service
+
+ Even if p2p techonology is not available, it will be
+ possible to register peer services, since a p2p
+ enabled WiFi device might appear at anytime. The
+ registered peer services will automatically be enabled
+ for the p2p WiFi device; the application does not need
+ to do any re-registration.
+
+ A Peer service belongs to the process that registers
+ it, thus if that process dies, its Peer services will
+ be destroyed as well.
+
+ The specification dict follows the format described
+ in the Peer API document.
+
+ ConnMan will be able to determine in most cases
+ whether to be the P2P Group Owner or not. If the
+ service for some reason must belong to a group that
+ this device manages, the "master" property can be
+ set. Do not enable the "master" property unless it
+ is absolutely sure that this is needed for the
+ provided peer service.
+
+ Possible Errors: [service].Error.InvalidArguments
+ [service].Error.AlreadyExists
+ [service].Error.NotSupported
+
+ void UnregisterPeerService(dict specification) [experimental]
+
+ Unregisters an existing local P2P Peer service
+
+ Possible Errors: [service].Error.InvalidArguments
+ [service].Error.NotRegistered
+
+Signals TechnologyAdded(object path, dict properties)
+
+ Signal that is sent when a new technology is added.
+
+ It contains the object path of the technology and
+ also its properties.
+
+ TechnologyRemoved(object path)
+
+ Signal that is sent when a technology has been removed.
+
+ The object path is no longer accessible after this
+ signal and only emitted for reference.
+
+ ServicesChanged(array{object, dict}, array{object})
+
+ This signal indicates a change in the services.
+ List of all services currently registered is passed
+ via the first array. And a list of services that have
+ been removed via the second array.
+
+ The list of all services is sorted. The dictionary
+ with the properties might be empty in case none of
+ the properties have changed. Or only contains the
+ properties that have changed.
+
+ For newly added services the whole set of properties
+ will be present.
+
+ The list of removed services can be empty.
+
+ This signal will only be triggered when the sort
+ order of the service list or the number of services
+ changes. It will not be emitted if only a property
+ of the service object changes. For that it is
+ required to watch the PropertyChanged signal of
+ the service object.
+
+ PeersChanged(array{object, dict}, array{object}) [experimental]
+
+ This signal indicates a change in the peers. List of
+ all peers currently registered is passed via the first
+ array. And a list of peers that have been removed via
+ the second array.
+
+ The list of all peers is sorted. The dictionary
+ with the properties might be empty in case none of the
+ properties have changed. Or only contains the
+ properties that have changed.
+
+ For newly added peers the whole set of properties will
+ be present.
+
+ The list of removed peers can be empty.
+
+ This signal will only be triggered when the sort order
+ of the peer list or the number of peers changes. It
+ will not be emitted if only a property of the peer
+ object changes. For that it is required to watch the
+ PropertyChanged signal of the peer object.
+
+ TetheringClientsChanged(array{string}, array{string}) [experimental]
+
+ This signal indicates a change in the tethering clients.
+ List of all tethering clients currently registered connman is
+ passed via the first array. And a list of tethering clients that
+ have been removed via the second array.
+
+ PropertyChanged(string name, variant value)
+
+ This signal indicates a changed value of the given
+ property.
+
+Properties string State [readonly]
+
+ The global connection state of a system. Possible
+ values are "offline", "idle", "ready" and "online".
+
+ If the device is in offline mode, the value "offline"
+ indicates this special global state. It can also be
+ retrieved via the OfflineMode property, but is kept
+ here for consistency and to differentiate from "idle".
+
+ However when OfflineMode property is true, the State
+ property can still be "idle", "ready" or "online"
+ since it is possible by the end user to re-enable
+ individual technologies like WiFi and Bluetooth while
+ in offline mode.
+
+ The states "idle", "ready" and "online" match to
+ states from the services. If no service is in
+ either "ready" or "online" state it will indicate
+ the "idle" state.
+
+ If at least one service is in "ready" state and no
+ service is in "online" state, then it will indicate
+ the "ready" state.
+
+ When at least one service is in "online" state,
+ this property will indicate "online" as well.
+
+ boolean OfflineMode [readwrite]
+
+ The offline mode indicates the global setting for
+ switching all radios on or off. Changing offline mode
+ to true results in powering down all devices. When
+ leaving offline mode the individual policy of each
+ device decides to switch the radio back on or not.
+
+ During offline mode, it is still possible to switch
+ certain technologies manually back on. For example
+ the limited usage of WiFi or Bluetooth devices might
+ be allowed in some situations.
+
+ boolean SessionMode [readwrite] [experminental][deprecated]
+
+ This property exists only for compatibility reasons
+ and does not affect ConnMan in any way.
+
+ The default value is false.
projects / platform / upstream / connman.git / blobdiff