fine. To workaround this BootROM bug with standard output, it is possible
to manually overwrite BootROM variables stored in SRAM which BootROM use
for checking if standard output is enabled or not. To enable BootROM
-standard output on UART, type this command folled by ENTER key:
+standard output on UART, type this command followed by ENTER key:
.RS 1.2i
.TP
.SH "EXAMPLES"
-Instruct BootROM to enter boot Xmodem boot mode, send \fIu-boot-spl.kwb\fP
+Instruct BootROM to enter boot Xmodem boot mode, send \fIu-boot-with-spl.kwb\fP
kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP at 115200 Bd and run terminal
program:
.IP
-.B kwboot -b u-boot-spl.kwb -t /dev/ttyUSB0
+.B kwboot -b u-boot-with-spl.kwb -t /dev/ttyUSB0
.PP
Instruct BootROM to enter boot Xmodem boot mode, send header of
-\fIu-boot-spl.kwb\fP kwbimage file via Xmodem at 115200 Bd, then instruct
+\fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem at 115200 Bd, then instruct
BootROM to change baudrate to 5200000 Bd, send data part of the kwbimage
file via Xmodem at high speed and finally run terminal program:
.IP
-.B kwboot -b u-boot-spl.kwb -B 5200000 -t /dev/ttyUSB0
+.B kwboot -b u-boot-with-spl.kwb -B 5200000 -t /dev/ttyUSB0
.PP
-Only send \fIu-boot-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP
+Only send \fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP
at 115200 Bd:
.IP
-.B kwboot -D u-boot-spl.kwb /dev/ttyUSB0
+.B kwboot -D u-boot-with-spl.kwb /dev/ttyUSB0
.PP
Instruct BootROM to enter console debug mode and run terminal program on
.br
Pali Rohár <pali@kernel.org>
.br
-Marek Behún <marek.behun@nic.cz>
+Marek Behún <kabel@kernel.org>