global: Migrate CONFIG_ARM_GIC_BASE_ADDRESS to CFG

[platform/kernel/u-boot.git] / doc / kwboot.1

diff --git a/doc/kwboot.1 b/doc/kwboot.1
index bda049b..a528fbb 100644 (file)
--- a/doc/kwboot.1
+++ b/doc/kwboot.1
@@ -11,7 +11,7 @@ kwboot \- Boot Marvell Kirkwood (and others 32-bit) SoCs over a serial link.
 .SH "DESCRIPTION"
 
 The \fBkwboot\fP program boots boards based on Marvell's 32-bit
-platforms including Kirkwood, Dove, A370, AXP, A375, A38x
+platforms including Kirkwood, Dove, Avanta, A370, AXP, A375, A38x
 and A39x over their integrated UART. Boot image files will typically
 contain a second stage boot loader, such as U-Boot. The image file
 must conform to Marvell's BootROM firmware image format
@@ -74,7 +74,7 @@ BootROM's standard input and BootROM's terminal echo are active and working
 fine. To workaround this BootROM bug with standard output, it is possible
 to manually overwrite BootROM variables stored in SRAM which BootROM use
 for checking if standard output is enabled or not. To enable BootROM
-standard output on UART, type this command folled by ENTER key:
+standard output on UART, type this command followed by ENTER key:
 
 .RS 1.2i
 .TP
@@ -149,25 +149,25 @@ Tested values for \fIbaudrate\fP for Armada 38x include: 115200,
 
 .SH "EXAMPLES"
 
-Instruct BootROM to enter boot Xmodem boot mode, send \fIu-boot-spl.kwb\fP
+Instruct BootROM to enter boot Xmodem boot mode, send \fIu-boot-with-spl.kwb\fP
 kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP at 115200 Bd and run terminal
 program:
 .IP
-.B kwboot -b u-boot-spl.kwb -t /dev/ttyUSB0
+.B kwboot -b u-boot-with-spl.kwb -t /dev/ttyUSB0
 
 .PP
 Instruct BootROM to enter boot Xmodem boot mode, send header of
-\fIu-boot-spl.kwb\fP kwbimage file via Xmodem at 115200 Bd, then instruct
+\fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem at 115200 Bd, then instruct
 BootROM to change baudrate to 5200000 Bd, send data part of the kwbimage
 file via Xmodem at high speed and finally run terminal program:
 .IP
-.B kwboot -b u-boot-spl.kwb -B 5200000 -t /dev/ttyUSB0
+.B kwboot -b u-boot-with-spl.kwb -B 5200000 -t /dev/ttyUSB0
 
 .PP
-Only send \fIu-boot-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP
+Only send \fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP
 at 115200 Bd:
 .IP
-.B kwboot -D u-boot-spl.kwb /dev/ttyUSB0
+.B kwboot -D u-boot-with-spl.kwb /dev/ttyUSB0
 
 .PP
 Instruct BootROM to enter console debug mode and run terminal program on
@@ -194,4 +194,4 @@ David Purdy <david.c.purdy@gmail.com>
 .br
 Pali Rohár <pali@kernel.org>
 .br
-Marek Behún <marek.behun@nic.cz>
+Marek Behún <kabel@kernel.org>