*
* @ref actionslider_example_page
*
- * @ref elm_animator_example_page_01
- *
* @ref transit_example_01_explained
*
* @ref transit_example_02_explained
*
* @ref calendar_example_06
*
+ * @ref spinner_example
+ *
+ * @ref slider_example
+ *
+ * @ref panes_example
+ *
* @ref clock_example
*
+ * @ref mapbuf_example
+
+ * @ref map_example_01
+ *
+ * @ref map_example_02
+ *
+ * @ref map_example_03
+ *
+ * @ref diskselector_example_01
+ *
+ * @ref diskselector_example_02
+ *
+ * @ref list_example_01
+ *
+ * @ref list_example_02
+ *
+ * @ref list_example_03
+ *
+ * @ref toolbar_example_01
+ *
+ * @ref toolbar_example_02
+ *
+ * @ref toolbar_example_03
+ *
+ * @ref segment_control_example
+ *
* @ref flipselector_example
+ *
+ * @ref fileselector_example
+ *
+ * @ref fileselector_button_example
+ *
+ * @ref fileselector_entry_example
+ *
+ * @ref index_example_01
+ *
+ * @ref index_example_02
+ *
+ * @ref gengrid_example
+ *
+ * @ref genlist_example_01
+ *
+ * @ref genlist_example_02
+ *
+ * @ref genlist_example_03
+ *
+ * @ref genlist_example_04
+ *
+ * @ref genlist_example_05
+ *
+ * @ref thumb_example_01
+ *
+ * @ref progressbar_example
+ *
+ * @ref slideshow_example
+ *
+ * @ref efl_thread_1
+ *
+ * @ref efl_thread_2
+ *
+ * @ref efl_thread_3
+ *
+ * @ref efl_thread_4
+ *
+ * @ref efl_thread_5
+ *
+ * @ref efl_thread_6
*/
/**
* And this is the end of this example.
*
* This example will look like this:
+ *
* @image html screenshots/bg_01.png
- * @image latex screenshots/bg_01.eps
+ * @image latex screenshots/bg_01.eps width=\textwidth
*/
/**
* @until }
*
* The next callback will be used when setting the overlay (using
- * elm_bg_overlay_set()):
+ * elm_object_content_set()):
*
* @skip _cb_overlay_changed
* @until }
*
* @skipline elm_radio_value_set
*
- * Then we add a checkbox for the elm_bg_overlay_set() function:
+ * Then we add a checkbox for the elm_object_content_set() function for the bg:
*
* @skip check_add
* @until evas_object_show
*
* Now look at the code of the @c _cb_overlay_changed again. If the checkbox
* state is checked, an overlay will be added to the background. It's done by
- * creating an Edje object, and setting it with elm_bg_overlay_set() to the
+ * creating an Edje object, and setting it with elm_object_content_set() to the
* background object. For information about what are and how to set Edje
* object, look at the Edje documentation.
*
* @until object_show
*
* The example will look like this:
+ *
* @image html screenshots/actionslider_01.png
- * @image latex screenshots/actionslider_01.eps
+ * @image latex screenshots/actionslider_01.eps width=\textwidth
*
* See the full source code @ref actionslider_example_01 "here"
*/
/**
- * @page elm_animator_example_page_01 Animator usage
- * @dontinclude animator_example_01.c
- *
- * For this example we will be using a bit of evas, you could animate a
- * elementary widget in much the same way, but to keep things simple we use
- * an evas_object_rectangle.
- *
- * As every other example we start with our include and a simple callback to
- * exit the app when the window is closed:
- * @skipline #include
- * @until }
- *
- * This next callback is the one that actually creates our animation, it
- * changes the size, position and color of a rectangle given to it in @a
- * data:
- * @until }
- *
- * Next we have a callback that prints a string, nothing special:
- * @until }
- *
- * This next callback is a little more interesting, it has a state variable
- * to know if the animation is currently paused or running, and it toogles
- * the state of the animation accordingly:
- * @until }
- * @until }
- * @until }
- *
- * Finally we have a callback to stop the animation:
- * @until }
- *
- * As with every example we need to do a bit of setup before we can actually
- * use an animation, but for the purposes of this example that's not relevant
- * so let's just skip to the good stuff, creating an animator:
- * @skipline animator_add
- * @note Since elm_animator is not a widget we can give it a NULL parent.
- *
- * Now that we have an elm_animator we set it's duration to 1 second:
- * @line duration_set
- *
- * We would also like our animation to be reversible, so:
- * @line reverse_set
- *
- * We also set our animation to repeat as many times as possible, which will
- * mean that _end_cb will only be called after UINT_MAX * 2 seconds(UINT_MAX
- * for the animation running forward and UNIT_MAX for the animation running
- * backwards):
- * @line repeat_set
- *
- * To add some fun to our animation we will use the IN_OUT curve style:
- * @line curve_style
- *
- * To actually animate anything we need an operation callback:
- * @line operation_callback
- *
- * Even though we set our animation to repeat for a very long time we are
- * going to set a end callback to it:
- * @line completion_callback
- * @note Notice that stoping the animation with the stop button will not make
- * _end_cb be called.
- *
- * Now that we have fully set up our animator we can tell it to start
- * animating:
- * @line animate
- *
- * There's a bit more of code that doesn't really matter to use so we skip
- * right down to our last interesting point:
- * @skipline animator_del
- * @note Because we created our animator with no parent we need to delete it
- * ourselves.
- *
- * The example should look like this:
- * @image html screenshots/animator_example_01.png
- * @image latex screenshots/animator_example_01.eps
- * @n
- * @image html screenshots/animator_example_02.png
- * @image latex screenshots/animator_example_02.eps
- * @n
- * @image html screenshots/animator_example_03.png
- * @image latex screenshots/animator_example_03.eps
- *
- * The full source code for this example can be found @ref
- * animator_example_01_c "here"
- */
-
-/**
* @page transit_example_03_c elm_transit - Combined effects and options.
*
* This example shows how to apply the following transition effects:
* @skip on_done
* @until evas_object_resize
*
- * We also add a resizeable white background to use behind our animation:
+ * We also add a resizable white background to use behind our animation:
*
* @skip bg_add
* @until evas_object_show
* @skip on_done
* @until evas_object_resize
*
- * We also add a resizeable white background to use behind our animation:
+ * We also add a resizable white background to use behind our animation:
*
* @skip bg_add
* @until evas_object_show
* but the custom theme must be added to the front of the search path.
*
* In the end, we should be looking at something like this:
+ *
* @image html screenshots/theme_example_01.png
- * @image latex screenshots/theme_example_01.eps
+ * @image latex screenshots/theme_example_01.eps width=\textwidth
*
* That's all. Boringly simple, and the full code in one piece can be found
* @ref theme_example_01.c "here".
* commonly used.
*
* In the end, we'll be presented with something that looks like this:
+ *
* @image html screenshots/button_01.png
- * @image latex screenshots/button_01.eps
+ * @image latex screenshots/button_01.eps width=\textwidth
*
* The full code of the example is @ref button_example_01.c "here" and we
* will follow here with a rundown of it.
* callback, where we move the button doing some size hint magic. To
* understand how that works better, refer to the @ref Box documentation.
* Also, the first time the function is called, we change the icon in the
- * middle button, using elm_button_icon_unset() first to keep the reference
+ * middle button, using elm_object_content_unset() first to keep the reference
* to the previous one, so we don't need to recreate it when we are done
* moving it.
* @skip static void
* @skipline show
*
* Our example will look like this:
+ *
* @image html screenshots/bubble_example_01.png
- * @image latex screenshots/bubble_example_01.eps
+ * @image latex screenshots/bubble_example_01.eps width=\textwidth
*
* See the full source code @ref bubble_example_01.c here.
* @example bubble_example_01.c
* untouched in our @ref box_example_01 "previous example".
*
* @image html screenshots/box_example_02.png
- * @image latex screenshots/box_example_02.eps
+ * @image latex screenshots/box_example_02.eps width=\textwidth
*
* @skipline Elementary.h
*
* @until elm_win_autodel
*
* Next a simple background is placed on our windows. More details on
- * @ref bg_01_example_page:
+ * @ref bg_01_example_page :
* @until evas_object_show(bg)
*
* Now, the exciting part, let's add the calendar with elm_calendar_add(),
* @until ELM_MAIN
*
* Our example will look like this:
+ *
* @image html screenshots/calendar_example_01.png
- * @image latex screenshots/calendar_example_01.eps
+ * @image latex screenshots/calendar_example_01.eps width=\textwidth
*
* See the full source code @ref calendar_example_01.c here.
* @example calendar_example_01.c
* skipline weekdays_names_set
*
* Our example will look like this:
+ *
* @image html screenshots/calendar_example_02.png
- * @image latex screenshots/calendar_example_02.eps
+ * @image latex screenshots/calendar_example_02.eps width=\textwidth
*
* See the full source code @ref calendar_example_02.c here.
* @example calendar_example_02.c
* @skipline elm_calendar_min_max_year_set
*
* Our example will look like this:
+ *
* @image html screenshots/calendar_example_03.png
- * @image latex screenshots/calendar_example_03.eps
+ * @image latex screenshots/calendar_example_03.eps width=\textwidth
*
* See the full source code @ref calendar_example_03.c here.
* @example calendar_example_03.c
* @until elm_calendar_selected_time_set
*
* Our example will look like this:
+ *
* @image html screenshots/calendar_example_04.png
- * @image latex screenshots/calendar_example_04.eps
+ * @image latex screenshots/calendar_example_04.eps width=\textwidth
*
* See the full source code @ref calendar_example_04.c here.
* @example calendar_example_04.c
* @skipline evas_object_smart_callback_add
*
* Our example will look like this:
+ *
* @image html screenshots/calendar_example_05.png
- * @image latex screenshots/calendar_example_05.eps
+ * @image latex screenshots/calendar_example_05.eps width=\textwidth
*
* See the full source code @ref calendar_example_05.c here.
* @example calendar_example_05.c
* @note Remember to draw marks after clear the calendar.
*
* Our example will look like this:
+ *
* @image html screenshots/calendar_example_06.png
- * @image latex screenshots/calendar_example_06.eps
+ * @image latex screenshots/calendar_example_06.eps width=\textwidth
*
* See the full source code @ref calendar_example_06.c here.
* @example calendar_example_06.c
*/
/**
+ * @page spinner_example Spinner widget example
+ *
+ * This code places seven Elementary spinner widgets on a window, each of
+ * them exemplifying a part of the widget's API.
+ *
+ * The first of them is the default spinner:
+ * @dontinclude spinner_example.c
+ * @skipline elm_spinner_add
+ * @until evas_object_show
+ * As you see, the defaults for a spinner are:
+ * @li no wrap
+ * @li min value set to 0
+ * @li max value set to 100
+ * @li step value set to 1
+ * @li label format set to "%0.f"
+ *
+ * If another format is required, see the second spinner. It will put a text
+ * before and after the value, and also format value to display two decimals:
+ * @skipline format_set
+ *
+ * The third one will use a customized step, define new minimum and maximum
+ * values and enable wrap, so when value reaches minimum it jumps to maximum,
+ * or jumps to minimum after maximum value is reached. Format is set to display
+ * a decimal:
+ * @skipline elm_spinner_add
+ * @until evas_object_show
+ *
+ * The fourth uses @c vertical style, so instead of left and right arrows,
+ * top and bottom are displayed. Also the change interval is reduced, so
+ * user can change value faster.
+ * @skipline style
+ * @skipline interval
+ *
+ * In the fifth the user won't be allowed to set value directly, i.e., will
+ * be obligate change value only using arrows:
+ * @skipline editable
+ *
+ * The sixth widget will receive a lot of special values, so
+ * instead of reading numeric values, user will see labels for each one.
+ * Also direct edition is disabled, otherwise users would see the numeric
+ * value on edition mode. User will be able to select a month in this widget:
+ * @skipline elm_spinner_add
+ * @until evas_object_show
+ *
+ * Finally the last widget will exemplify how to listen to widget's signals,
+ * <tt> changed </tt> and <tt> delay,changed </tt>. First we need to
+ * implement callback functions that will simply print spinner's value:
+ * @dontinclude spinner_example.c
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
+ * @until }
+ *
+ * The first callback function should be called everytime value changes,
+ * the second one only after user stops to increment or decrement. Try
+ * to keep arrows pressed and check the difference.
+ * @skip smart_callback
+ * @skipline smart_callback
+ * @skipline smart_callback
+ *
+ * See the full @ref spinner_example.c "example", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/spinner_example.png
+ * @image latex screenshots/spinner_example.eps width=\textwidth
+ *
+ * See the full @ref spinner_example.c "source code" for this example.
+ *
+ * @example spinner_example.c
+ */
+
+/**
+ * @page slider_example Slider widget example
+ *
+ * This code places seven Elementary slider widgets on a window, each of
+ * them exemplifying a part of the widget's API.
+ *
+ * The first of them is the default slider:
+ * @dontinclude slider_example.c
+ * @skipline elm_slider_add
+ * @until evas_object_show
+ *
+ * As you see, the defaults for a slider are:
+ * @li horizontal
+ * @li no label
+ * @li no values (on indicator or unit labels)
+ *
+ * Actually it's pretty useless this way. So let's learn how to improve it.
+ *
+ * If some decoration is required, a label can be set, and icon before and
+ * after the bar as well. On the second slider will add a @c home icon
+ * and a @c folder icon at @c end.
+ * @skipline text_set
+ * @until end_set
+ *
+ * If the bar size need to be changed, it can be done with span set function,
+ * that doesn't accounts other widget's parts size. Also the bar can starts
+ * with a not default value (0.0), as we done on third slider:
+ * @skipline value_set
+ * @skipline span_size_set
+ *
+ * So far, users won't be able to see the slider value. If it's required,
+ * it can be displayed in two different areas, units label or above
+ * the indicator.
+ *
+ * Let's place a units label on our widget, and also let's set minimum and
+ * maximum value (uses 0.0 and 1.0 by default):
+ * @skipline unit_format_set
+ * @skipline min_max_set
+ *
+ * If above the indicator is the place to display the value, just set it.
+ * Also, is possible to invert a bar, as you can see:
+ * @skipline indicator_format_set
+ * @skipline inverted_set
+ *
+ * But if you require to use a function a bit more customized to show the value,
+ * is possible to registry a callback function that will be called
+ * to display unit or indicator label. Only the value will be passed to this
+ * function, that should return a string.
+ * In this case, a function to free this string will be required.
+ *
+ * Let's exemplify with indicator label on our sixth slider:
+ * @dontinclude slider_example.c
+ * @skip static
+ * @skip }
+ * @skip static
+ * @skip }
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
+ * @until }
+ *
+ * Setting callback functions:
+ * @skipline indicator_format_function_set
+ * @skipline _indicator_free
+ *
+ * Also, a slider can be displayed vertically:
+ * @dontinclude slider_example.c
+ * @skipline elm_slider_horizontal_set
+ *
+ * Finally the last widget will exemplify how to listen to widget's signals,
+ * <tt> changed </tt> and <tt> delay,changed </tt>. First we need to
+ * implement callback functions that will simply print slider's value:
+ * @dontinclude slider_example.c
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
+ * @until }
+ *
+ * The first callback function should be called everytime value changes,
+ * the second one only after user stops to increment or decrement. Try
+ * to keep arrows pressed and check the difference.
+ * @skip smart_callback
+ * @skipline smart_callback
+ * @skipline smart_callback
+ *
+ * See the full @ref slider_example.c "example", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/slider_example.png
+ * @image latex screenshots/slider_example.eps width=\textwidth
+ *
+ * See the full @ref slider_example.c "source code" for this example.
+ *
+ * @example slider_example.c
+ */
+
+/**
+ * @page panes_example Panes widget example
+ *
+ * This code places two Elementary panes widgets on a window, one of them
+ * displayed vertically and the other horizontally, to exemplify
+ * a part of the widget's API. Also, all the signals emitted by this
+ * widget will be covered.
+ *
+ * Let's start adding a panes to our window:
+ * @dontinclude panes_example.c
+ * @skipline elm_panes_add
+ * @until evas_object_show
+ *
+ * Now we will set a content (a simple button) to the left side of our
+ * panes widget:
+ * @skipline elm_button_add
+ * @until content_left_set
+ *
+ * The content of the right side will be something a bit more elaborated, we'll
+ * place another panes, displayed vertically (it's displayed horizontally
+ * by default):
+ * @skipline elm_panes_add
+ * @until content_right_set
+ *
+ * When populating a panes displayed vertically, remember that left content
+ * will be placed at top, and right content will place at bottom. Next
+ * we will add two buttons to exemplify that:
+ * @skipline elm_button_add
+ * @until content_right_set
+ *
+ * Panes widgets emits 4 different signals, depending on users interaction
+ * with the draggable bar. We'll add a callback function for each of them.
+ *
+ * <tt> "clicked" signal </tt>:
+ *
+ * Callback function that just print "Clicked" to stdin:
+ * @dontinclude panes_example.c
+ * @skip static void
+ * @skip }
+ * @skip static void
+ * @skip }
+ * @skip static void
+ * @skip }
+ * @skipline static void
+ * @until }
+ *
+ * Also, add callback function to the panes:
+ * @skipline "clicked"
+ *
+ * <tt> "press" signal </tt>:
+ *
+ * Callback function that just print "Pressed" to stdin:
+ * @dontinclude panes_example.c
+ * @skip static void
+ * @skip }
+ * @skipline static void
+ * @until }
+ *
+ * Also, add callback function to the panes:
+ * @skipline "press"
+ *
+ * Now, let's try to make our callback functions a bit more useful:
+ *
+ * <tt> "unpress" signal </tt>:
+ *
+ * Suppose we want to know the size proportion of left content after
+ * user drags the bar. We need to listen for @c unpress signal, and
+ * get this size from our panes widget. It's done on the following
+ * function:
+ * @dontinclude panes_example.c
+ * @skip static void
+ * @skip }
+ * @skip static void
+ * @skip }
+ * @skipline static void
+ * @until }
+ *
+ * Adding the callback function to the panes:
+ * @skipline "unpress"
+
+ * <tt> "clicked,double" signal </tt>:
+ *
+ * Now, a interesting feature that could be addded to panes widget.
+ * Hide a content when user double click the draggable bar. It's done
+ * using a variable to store size and content left size getter and setter
+ * on the following function:
+ * @dontinclude panes_example.c
+ * @skipline static double
+ * @skip static void
+ * @skip }
+ * @skip static void
+ * @skip }
+ * @skip static void
+ * @skip }
+ * @skipline static void
+ * @until }
+ * @until }
+ * @until }
+ *
+ * Adding the callback function to the panes:
+ * @skipline "clicked,double"
+ * @until panes);
+ *
+ * See the full @ref panes_example.c "example", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/panes_example.png
+ * @image latex screenshots/panes_example.eps width=\textwidth
+ *
+ * @example panes_example.c
+ */
+
+/**
* @page clock_example Clock widget example
*
* This code places five Elementary clock widgets on a window, each of
*
* See the full @ref clock_example.c "example", whose window should
* look like this picture:
+ *
* @image html screenshots/clock_example.png
- * @image latex screenshots/clock_example.eps
+ * @image latex screenshots/clock_example.eps width=\textwidth
+ *
+ * See the full @ref clock_example_c "source code" for this example.
*
* @example clock_example.c
*/
/**
- * @page flipselector_example Flip selector widget example
+ * @page mapbuf_example Mapbuf Widget Example
+ *
+ * This code places a Elementary mapbuf widget on a window,
+ * to exemplify part of the widget's API.
+ *
+ * First we'll add an window with a background and a vertical box to
+ * pack our interface elements:
+ * @dontinclude mapbuf_example.c
+ * @skipline win_add
+ * @until show(bx)
+ *
+ * Next we'll simply add the mapbuf widget to the box:
+ * @skipline mapbuf_add
+ * @until pack_end
+ *
+ * But mapbuf is a container widget, it won't do anything alone. So let's
+ * create a table full of icons. For that we'll loop to fill each line of each
+ * column. See @ref tutorial_table_01 "tutorial_table_01"
+ * if you don't know how to use tables:
+ * @skipline table_add
+ * @until }
+ * @until }
*
- * This code places an Elementary flip selector widget on a window,
- * along with two buttons trigerring actions on it (though its API).
+ * Finally, setting mapbuf content:
+ * @skipline content_set
+ * @skipline show
*
- * The selector is being populated with the following items:
- * @dontinclude flipselector_example.c
- * @skip lbl[]
- * @until ;
+ * Also, would be good a horizontal box with some controls to change mapbuf
+ * behavior:
+ * @skipline box_add
+ * @until show
*
- * Next, we create it, populating it with those items and registering
- * two (smart) callbacks on it:
- * @dontinclude flipselector_example.c
- * @skip fp = elm_flipselector_add
- * @until object_show
+ * By default map is disabled. So just setting content isn't enough.
+ * Alpha and smooth settings will be applied when map is enabled.
+ * So we'll add a toggle for that. Everytime the map properties
+ * are changed, map will need to be enabled again. So if you
+ * want to play a bit with our example, remember to always enable
+ * map again after concluding your changes.
+ * @skipline toggle_add
+ * @until show
*
- * Those two callbacks will take place whenever one of those smart
- * events occur, and they will just print something to @c stdout:
- * @dontinclude flipselector_example.c
- * @skip underflow callback
- * @until static void
- * Flip the sheets on the widget while looking at the items list, in
- * the source code, and you'll get the idea of those events.
+ * We have added a callback function to this toggle, so it will enable
+ * or disable map:
+ * @dontinclude mapbuf_example.c
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
*
- * The two buttons below the flip selector will take the actions
- * described in their labels:
- * @dontinclude flipselector_example.c
- * @skip bt = elm_button_add
- * @until callback_add(win
+ * Let's add check boxes for alpha blending and smooth rendering:
+ * @skipline check_add
+ * @until show
+ * @until show
*
- * @dontinclude flipselector_example.c
- * @skip unselect the item
- * @until underflow
+ * By default, mapbuf would enable alpha blending and smooth rendering,
+ * so we need to check boxes to be consistent with its behavior.
*
- * Click on them to exercise those flip selector API calls. To
- * interact with the other parts of this API, there's a command line
- * interface, whose help string can be asked for with the 'h' key:
- * @dontinclude flipselector_example.c
- * @skip commands
- * @until ;
+ * Callback functions look like the one added to the toggle. This way we
+ * could enable or disable the both properties:
+ * @dontinclude mapbuf_example.c
+ * @skip static
+ * @skip }
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
+ * @until }
*
- * The 'n' and 'p' keys will exemplify elm_flipselector_flip_next()
- * and elm_flipselector_flip_prev(), respectively. 'f' and 'l' account
- * for elm_flipselector_first_item_get() and
- * elm_flipselector_last_item_get(), respectively. Finally, 's' will
- * issue elm_flipselector_selected_item_get() on our example flip
- * selector widget.
+ * You'll see that disabling alpha blending will set a black rectangle below
+ * the icons. That's the reason you only should enable that when you're sure
+ * the mapbuf content is 100% solid.
*
- * See the full @ref flipselector_example.c "example", whose window should
+ * See @ref mapbuf_example.c "mapbuf_example.c", whose window should
* look like this picture:
- * @image html screenshots/flipselector_example.png
- * @image latex screenshots/flipselector_example.eps
*
- * @example flipselector_example.c
+ * @image html screenshots/mapbuf_example.png
+ * @image latex screenshots/mapbuf_example.eps width=\textwidth
+ *
+ * @example mapbuf_example.c
*/
/**
- * @page tutorial_hover Hover example
- * @dontinclude hover_example_01.c
+ * @page map_example_01 Map Example - Creation and Zoom
*
- * On this example we are going to have a button that when clicked will show our
- * hover widget, this hover will have content set on it's left, top, right and
- * middle positions. In the middle position we are placing a button that when
- * clicked will hide the hover. We are also going to use a non-default theme
- * for our hover. We won't explain the functioning of button for that see @ref
- * Button.
+ * This code places a Elementary map widget on a window,
+ * to exemplify part of the widget's API.
*
- * We start our example with a couple of callbacks that show and hide the data
- * they're given(which we'll see later on is the hover widget):
- * @skip static
- * @until }
- * @until }
+ * Let's start adding a map to our window:
+ * @dontinclude map_example_01.c
+ * @skipline elm_map_add
+ * @until evas_object_show
*
- * In our main function we'll do some initialization and then create 3
- * rectangles, one red, one green and one blue to use in our hover. We'll also
- * create the 2 buttons that will show and hide the hover:
- * @until show(bt2)
+ * It's enough to display a world map inside our window. But usually you'll
+ * need to let user interact with the map. We need to place some buttons,
+ * so the user could control the map. It's done on the followin code.
+ * If you don't know about boxes, or buttons, check their examples,
+ * @ref box_example_01 "Box Example 1" and
+ * @ref button_example_01 "Button Example 1".
+ * @skipline elm_box_add
+ * @until _bt_zoom_fill
+ *
+ * We are adding callback functions that will be called when the user clicks
+ * over these buttons. Let's study such functions, starting from the function
+ * that will zoom in the map:
+ * @dontinclude map_example_01.c
+ * @skipline static void
+ * @until }
*
- * With all of that squared away we can now get to the heart of the matter,
- * creating our hover widget, which is easy as pie:
- * @until hover
+ * First thing done is assure zoom mode is set to manual. It's the default
+ * mode, but the other buttons will change this, so before setting a new
+ * zoom value, we need to change the zoom mode.
*
- * Having created our hover we now need to set the parent and target. Which if
- * you recall from the function documentations are going to tell the hover which
- * area it should cover and where it should be centered:
- * @until bt
+ * Then, we get the current zoom value, increment that, and set the new
+ * value to the map. If it's bigger than max zoom value allowed, it will
+ * remain on the maximum allowed, nothing bad will happen. This way we
+ * don't need to check first if it won't be bigger than max.
+ *
+ * Zoom out function is basically the same thing, but zoom will be decremented
+ * instead of incremented:
+ * @skipline static void
+ * @until }
+ *
+ * The "X" button, when pressed, will call a function that will
+ * zoom the map until it fits
+ * inside the scroll frame with no pixels outside this area:
+ * @skipline static void
+ * @until }
+ *
+ * And the "#" button, will call a function that will zoom until map fills
+ * scroll, ensuring no pixels are left unfilled:
+ * @skipline static void
+ * @until }
+ *
+ * But we can also set map to show something different from default
+ * world map, changing the zoom level and region shown. Let's pick a
+ * wonderful city coordinates, one placed at <tt> 43 20 S, 22 90 W </tt>.
+ * Since map uses double variables to represent latitude and longitude,
+ * to represent north or east, we should represent it as positive values,
+ * and south or west as negative. Also, the value will be represented as
+ * degree.min. So, for example, our longitude <tt> 43 20 S </tt> will
+ * be represented
+ * by the value <tt> -43.20 </tt>. A zoom set to @c 12 should be enough
+ * to show a city.
+ * @skipline region_show
+ * @until zoom_set
+ *
+ * See @ref map_example_01.c "map_example_01.c" for full source,
+ * whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/map_example_01.png
+ * @image latex screenshots/map_example_01.eps width=\textwidth
+ *
+ * @example map_example_01.c
+ */
+
+/**
+ * @page map_example_02 Map Example - Markers Usage
+ *
+ * This code places a Elementary map widget on a window,
+ * to exemplify part of the widget's API, related to markers.
+ *
+ * We'll start this example the same way
+ * @ref map_example_01 "Map Example 1". Adding a map with buttons to control
+ * zoom, so if you didn't read it yet, just do it now.
+ * @dontinclude map_example_02.c
+ * @skipline elm_map_add
+ * @until zoom_fill
+ *
+ * Markers can be placed over the map to represent anything we want. Let's
+ * say we want to represent some countries and cities with markers. To add
+ * a mark we need a marker class and also a group class.
+ *
+ * A marker class can be created as the following code does:
+ * @skipline marker_class_new
+ * @until style_set
+ *
+ * These lines create a new class, set a function to return the object
+ * to be displayed inside the bubble that opens when a user clicks over
+ * the mark, set the function to retrieve an icon to be placed inside
+ * the marker, and defines the style of this marker. It can be @c empty
+ * that will just show the icon, @c radio, that will place a blue circle,
+ * and @c radio2 that will place a green circle.
+ *
+ * The group classes can be created in a very similar way, but you won't
+ * set callback functions to get stuff to be placed inside the bubble,
+ * since clicking over a group marker will just get the content
+ * of all the markers composing the group and place on this bubble.
+ * The limit of markers to get can be set with function
+ * elm_map_max_marker_per_group_set() but we won't need on this example.
+ * But we can set the zoom required to display the marks that belongs
+ * to this group class, so if the zoom is less than this value, nothing
+ * will be show. The group marker style will be used when markers are
+ * near each other, and the count of markers grouped will be placed
+ * inside the group marker.
+ * @skipline group_class_new
+ * @until displayed_set
+ *
+ * For marker and group classes to represent a country, the same is done:
+ * @skipline marker_class_new
+ * @until displayed_set
+ *
+ * Next we'll create some markers representing cities and coutries.
+ * We'll append them in a list, to close up them later. To create a marker
+ * we need to pass the coordinates, marker class, group class and optionally,
+ * data:
+ * @skipline marker_add
+ * @until data_chile
+ * @until append
+ *
+ * We have created a specific structure for this example to store the name
+ * of the place and a path to a image file to represent it.
+ * @dontinclude map_example_02.c
+ * @skipline typedef
+ * @until Marker_Data;
+ *
+ * We'll create instances for each place:
+ * @skipline argentina
+ * @until sky_03
+ *
+ * Finally, on our @c main function, we ask the map to show all the markers
+ * with the biggest zoom possible, passing the list of markers added:
+ * @skipline list_show
+ *
+ * Actually the zoom is not what we want, so after the download of the map
+ * is concluded, let's set another zoom level. For this we add a callback
+ * for @c "downloaded" signal:
+ * @skipline callback_add
+ *
+ * The callback function will simply set the zoom level we want and remove
+ * the callback, otherwise it would be called all the time, after the map
+ * is downloaded:
+ * @dontinclude map_example_02.c
+ * @skipline _map_downloaded
+ * @until }
+ *
+ * We added two kinds of callback functions when we added the markers.
+ * One will return the content of the bubbles, and other the icon to be
+ * placed inside the marker.
+ *
+ * To return an icon, all we need to do is add a elm_icon and return it:
+ * @dontinclude map_example_02.c
+ * @skip static Evas_Object
+ * @skip }
+ * @skipline static Evas_Object
+ * @until }
+ *
+ * For the content, let's return something more elaboreate. We will return
+ * a box with an image representing the place, and the name of this place:
+ * @skipline static Evas_Object
+ * @until }
+ *
+ * See @ref map_example_02.c "map_example_02.c" for full source,
+ * whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/map_example_02.png
+ * @image latex screenshots/map_example_02.eps width=\textwidth
+ *
+ * @example map_example_02.c
+ */
+
+/**
+ * @page map_example_03 Map Example - Route and Name Usage
+ *
+ * This code places a Elementary map widget on a window,
+ * to exemplify part of the widget's API, related routes and names.
+ *
+ * In this example, we will suppose we need to set a route for the user
+ * from his current point (a gps could provide us this information)
+ * to somewhere else. So we would have coordinates of this
+ * start point, and would like that he enters the address of his
+ * destination in a entry, and we'll trace a route on the map.
+ *
+ * We'll start this example the same way
+ * @ref map_example_01 "Map Example 1". Adding a map with buttons to control
+ * zoom, so if you didn't read it yet, just do it now. Actually there is
+ * a change, that we're aligning buttons to the top, since we wan't a
+ * vertical control box this time.
+ * @dontinclude map_example_03.c
+ * @skipline elm_map_add
+ * @until zoom_fill
+ * @until align_set
+ *
+ * Next we set the box to be vertical and change it's size, weight
+ * and alignment, so it will occupy the top of the window, from left
+ * to right:
+ * @skipline horizontal_set
+ * @until align_set
+ *
+ * We'll add an entry with a preliminar address, that I know will
+ * find a coordinate, to examplify names work. But you can try
+ * lots of addresses. From city or country names to pubs, or whatever
+ * you want. To try is enough to run the example, type the address and
+ * press "Route" button. This button will call a function that will
+ * get the typed address and find the route.
+ * @skipline entry_add
+ * @until align_set
+ * @until align_set
+ *
+ * The button pass an structure
+ * instance we make for this example, with all the fields we'll need.
+ * @dontinclude map_example_03.c
+ * @skipline _Example_Data
+ * @until example_data;
+ *
+ * Let's initialize it's fields:
+ * @skipline example_data.map
+ * @until example_data.start_lat
+ *
+ * @c map and @c entry are our elementary objects, @c route is set to @c NULL,
+ * since we don't have one yet, and the coordinates of the start point is set
+ * (longitude and latitude).
+ *
+ * Also, let's show this start point at the center of the map, and set a zoom
+ * nice enough to close it:
+ * @skipline region_show
+ * @until zoom_set
+ *
+ * These lines were already explained on @ref map_example_02 "Map Example 2".
+ *
+ * Now we'll see the "Route" button callback function:
+ * @dontinclude map_example_03.c
+ * @skip static void
+ * @skip }
+ * @skipline static void
+ * @until }
+ *
+ * First we get the address string from our entry. Then we use @c name
+ * conversion
+ * util functions, so we could get coordinates for this address. These
+ * functions return an #Elm_Map_Name handle for us.
+ * Function elm_map_utils_convert_name_into_coord() will do this job for us,
+ * but it's an assyncronous function, since it requires this
+ * information from the server.
+ *
+ * That's the reason we need to wait for
+ * <tt> "name,loaded" </tt> signal. We add a callback function for this:
+ * @dontinclude map_example_03.c
+ * @skipline static void
+ * @until }
+ *
+ * This function will check if a previous route was traced, and if it was,
+ * it will remove it. Next we'll get destination coordinates from our
+ * @c name, and use them to add a new route.
+ *
+ * To trace a route we need to know how the user will go through the path.
+ * Let's suppose he'll be walking, but doesn't like to walk, so we
+ * need to choose the shortest path intead of the route that would
+ * made him spend less time. Coordinates of the point from where he will
+ * start and of the destination point need to be passed as well.
+ *
+ * Finally we'll set a color different from solid red (default), to show
+ * our route. We set it green.
+ *
+ * See @ref map_example_03.c "map_example_03.c" for full source,
+ * whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/map_example_03.png
+ * @image latex screenshots/map_example_03.eps width=\textwidth
+ *
+ * @example map_example_03.c
+ */
+
+/**
+ * @page diskselector_example_01 Diskselector widget example
+ *
+ * This code places 4 Elementary diskselector widgets on a window, each of
+ * them exemplifying a part of the widget's API.
+ *
+ * All of them will have weekdays as items, since we won't focus
+ * on items management on this example. For an example about this subject,
+ * check @ref diskselector_example_02.
+ *
+ * The first of them is a default diskselector.
+ * @dontinclude diskselector_example_01.c
+ * @skipline lbl
+ * @until }
+ * @skipline elm_diskselector_add
+ * @until evas_object_show
+ *
+ * We are just adding the diskselector, so as you can see, defaults for it are:
+ * @li Only 3 items visible each time.
+ * @li Only 3 characters are displayed for labels on side positions.
+ * @li The first added item remains centeres, i.e., it's the selected item.
+ *
+ * To add items, we are just appending it on a loop, using function
+ * elm_diskselector_item_append(), that will be better exaplained on
+ * items management example.
+ *
+ * For a circular diskselector, check the second widget. A circular
+ * diskselector will display first item after last, and last previous to
+ * the first one. So, as you can see, @b Sa will appears on left side
+ * of selected @b Sunday. This property is set with
+ * elm_diskselector_round_set().
+ *
+ * Also, we decide to display only 2 character for side labels, instead of 3.
+ * For this we call elm_diskselector_side_label_length_set(). As result,
+ * we'll see @b Mo displayed instead of @b Mon, when @b Monday is on a
+ * side position.
+ *
+ * @skipline elm_diskselector_add
+ * @until evas_object_show
+ *
+ * But so far, we are only displaying 3 items at once. If more are wanted,
+ * is enough to call elm_diskselector_display_item_num_set(), as you can
+ * see here:
+ * @skipline elm_diskselector_add
+ * @until evas_object_show
+ *
+ * @note You can't set less than 3 items to be displayed.
+ *
+ * You can get the number of items in the diskselector by calling
+ * elm_diskselector_display_item_num_get(), as you can see here:
+ * @skipline elm_diskselector_add
+ *
+ * Finally, if a bounce effect is required, or you would like to see
+ * scrollbars, it is possible. But, for default theme, diskselector
+ * scrollbars will be invisible anyway.
+ * @skipline elm_diskselector_add
+ * @until evas_object_show
+ *
+ * See the full @ref diskselector_example_01.c "diskselector_example_01.c"
+ * code, whose window should look like this picture:
+ *
+ * @image html screenshots/diskselector_example_01.png
+ * @image latex screenshots/diskselector_example_01.eps width=\textwidth
+ *
+ * @example diskselector_example_01.c
+ */
+
+/**
+ * @page diskselector_example_02 Diskselector - Items management
+ *
+ * This code places a Elementary diskselector widgets on a window,
+ * along with some buttons trigerring actions on it (though its API).
+ * It covers most of Elm_Diskselector_Item functions.
+ *
+ * On our @c main function, we are adding a default diskselector with
+ * 3 items. We are only setting their labels (second parameter of function
+ * elm_diskselector_item_append):
+ * @dontinclude diskselector_example_02.c
+ * @skipline elm_diskselector_add
+ * @until Item 2
+ *
+ * Next we are adding lots of buttons, each one for a callback function
+ * that will realize a task covering part of diskselector items API.
+ * Lets check the first one:
+ * @skipline elm_button_add
+ * @until evas_object_show
+ *
+ * We are labeling the button with a task description with
+ * elm_object_text_set() and setting a callback
+ * function evas_object_smart_callback_add().
+ * Each callback function will have the signature:
+ * <tt> static void _task_cb(void *data, Evas_Object *obj,
+ * void *event_info)</tt> with the function name varying for each task.
+ *
+ * Now let's cover all of them.
+ *
+ * <b> Appending an item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _add_cb
+ * @until }
+ *
+ * All items are included on diskselector after last one. You @b can't
+ * preprend items.
+ *
+ * The first parameter of elm_diskselector_item_append() is the diskselector
+ * object, that we are receiving as data on our callback function.
+ * The second one is a label, the string that will be placed in the center
+ * of our item. As we don't wan't icons or callback functions, we can
+ * send NULL as third, fourth and fifth parameters.
+ *
+ * <b> Appending an item with icon: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _add_ic_cb
+ * @until }
+ *
+ * If an icon is required, you can pass it as third paramenter on our
+ * elm_diskselector_item_append() function. It will be place on the
+ * left side of item's label, that will be shifted to right a bit.
+ *
+ * For more details about how to create icons, look for elm_icon examples.
+ *
+ * <b> Appending an item with callback function for selected: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _sel_cb
+ * @until }
+ * @until }
+ *
+ * To set a callback function that will be called every time an item is
+ * selected, i.e., everytime the diskselector stops with this item in
+ * center position, just pass the function as fourth paramenter.
+ *
+ * <b> Appending an item with callback function for selected with data: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _sel_data_cb
+ * @until }
+ * @until }
+ * @until }
+ * @until }
+ *
+ * If the callback function request an extra data, it can be attached to our
+ * item passing a pointer for data as fifth parameter.
+ * Our function _sel_data_cb will receive it as <tt> void *data </tt>.
+ *
+ * If you want to free this data, or handle that the way you need when the
+ * item is deleted, set a callback function for that, with
+ * elm_diskselector_item_del_cb_set().
+ *
+ * As you can see we check if @c it is not @c NULL after appending it.
+ * If an error happens, we won't try to set a function for it.
+ *
+ * <b> Deleting an item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skip _del_cb
+ * @skipline _del_cb
+ * @until }
+ *
+ * To delete an item we simple need to call elm_diskselector_item_del() with
+ * a pointer for such item.
+ *
+ * If you need, you can get selected item with
+ * elm_diskselector_selected_item_get(), that will return a pointer for it.
+ *
+ * <b> Unselecting an item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _unselect_cb
+ * @until }
+ *
+ * To select an item, you should call elm_diskselector_item_selected_set()
+ * passing @c EINA_TRUE, and to unselect it, @c EINA_FALSE.
+ *
+ * If you unselect the selected item, diskselector will automatically select
+ * the first item.
+ *
+ * <b> Printing all items: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _print_cb
+ * @until }
+ *
+ * <b> Clearing the diskselector: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _clear_cb
+ * @until }
+ *
+ * <b> Selecting the first item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _select_first_cb
+ * @until }
+ *
+ * <b> Selecting the last item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _select_last_cb
+ * @until }
+ *
+ * <b> Selecting the next item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _select_next_cb
+ * @until }
+ *
+ * <b> Selecting the previous item: </b>
+ * @dontinclude diskselector_example_02.c
+ * @skipline _select_prev_cb
+ * @until }
+ *
+ * See the full @ref diskselector_example_02.c "diskselector_example_02.c"
+ * code, whose window should look like this picture:
+ *
+ * @image html screenshots/diskselector_example_02.png
+ * @image latex screenshots/diskselector_example_02.eps width=\textwidth
+ *
+ * @example diskselector_example_02.c
+ */
+
+/**
+ * @page list_example_01 List widget example
+ *
+ * This code places a single Elementary list widgets on a window, just
+ * to exemplify the more simple and common use case: a list will be created
+ * and populated with a few items.
+ *
+ * To keep it simple, we won't show how to customize the list, for this check
+ * @ref list_example_02. Also, we won't focus
+ * on items management on this example. For an example about this subject,
+ * check @ref list_example_03.
+ *
+ * To add a list widget.
+ * @dontinclude list_example_01.c
+ * @skipline elm_list_add
+ *
+ * We are just adding the list, so as you can see, defaults for it are:
+ * @li Items are displayed vertically.
+ * @li Only one item can be selected.
+ * @li The list doesn't bouce.
+ *
+ * To add items, we are just appending it on a loop, using function
+ * elm_list_item_append(), that will be better exaplained on
+ * items management example.
+ * @dontinclude list_example_01.c
+ * @skipline lbl[]
+ * @until };
+ * @skipline for
+ * @skipline elm_list_item_append
+ *
+ * After we just want to show the list. But first we need to start the widget.
+ * It was done this way to improve widget's performance. So, always remember
+ * that:
+ * @warning Call elm_list_go before showing the object
+ * @skipline elm_list_go
+ * @skipline show
+ *
+ * See the full @ref list_example_01.c "list_example_01.c"
+ * code, whose window should look like this picture:
+ *
+ * @image html screenshots/list_example_01.png
+ * @image latex screenshots/list_example_01.eps width=\textwidth
+ *
+ * @example list_example_01.c
+ */
+
+/**
+ * @page list_example_02 List widget example
+ *
+ * This code places a single Elementary list widgets on a window,
+ * exemplifying a part of the widget's API.
+ *
+ * First, we will just create a simple list, as done on @ref list_example_01 :
+ * @dontinclude list_example_02.c
+ * @skipline lbl
+ * @until }
+ * @skipline elm_list_add
+ * @until elm_list_item_append
+ *
+ * Now, let's customize this list a bit. First we will display items
+ * horizontally:
+ * @skipline horizontal_set
+ *
+ * Then we will choose another list mode. There are four of them, and
+ * the default #Elm_List_Mode is #ELM_LIST_SCROLL. Let's set compress mode:
+ * @skipline mode_set
+ *
+ * To enable multiple items selection, we need to enable it, since only one
+ * selected item is allowed by default:
+ * @skipline elm_list_multi_select_set
+ *
+ * We are not adding items with callback functions here,
+ * since we'll explain it better on @ref list_example_03. But if the callback
+ * need to be called everytime user clicks an item, even if already selected,
+ * it's required to enable this behavior:
+ * @skipline elm_list_always_select_mode_set
+ *
+ * Finally, if a bounce effect is required, or you would like to see
+ * scrollbars, it is possible. But, for default theme, list
+ * scrollbars will be invisible anyway.
+ * @skipline bounce_set
+ * @until SCROLLER_POLICY_ON
+ *
+ * See the full @ref list_example_02.c "list_example_02.c"
+ * code, whose window should look like this picture:
+ *
+ * @image html screenshots/list_example_02.png
+ * @image latex screenshots/list_example_02.eps width=\textwidth
+ *
+ * @example list_example_02.c
+ */
+
+/**
+ * @page list_example_03 List - Items management
+ *
+ * This code places a Elementary list widgets on a window,
+ * along with some buttons trigerring actions on it (though its API).
+ * It covers most of Elm_List_Item functions.
+ *
+ * On our @c main function, we are adding a default list with
+ * 3 items. We are only setting their labels (second parameter of function
+ * elm_list_item_append):
+ * @dontinclude list_example_03.c
+ * @skipline elm_list_add
+ * @until Item 2
+ *
+ * Next we are adding lots of buttons, each one for a callback function
+ * that will realize a task covering part of list items API.
+ * Lets check the first one:
+ * @skipline elm_button_add
+ * @until evas_object_show
+ *
+ * We are labeling the button with a task description with
+ * elm_object_text_set() and setting a callback
+ * function evas_object_smart_callback_add().
+ * Each callback function will have the signature:
+ * <tt> static void _task_cb(void *data, Evas_Object *obj,
+ * void *event_info)</tt> with the function name varying for each task.
+ *
+ * Now let's cover all of them.
+ *
+ * <b> Prepending an item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _prepend_cb
+ * @until }
+ *
+ * The item will be placed on the begining of the list,
+ * i.e. it will be the first one.
+ *
+ * The first parameter of elm_list_item_prepend() is the list
+ * object, that we are receiving as data on our callback function.
+ * The second one is a label, the string that will be placed in the center
+ * of our item. As we don't wan't icons or callback functions, we can
+ * send NULL as third, fourth, fifth and sixth parameters.
+ *
+ * <b> Appending an item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _add_cb
+ * @until }
+ *
+ * Items included with append will be inserted inserted after the last one.
+ *
+ * <b> Appending an item with icon: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _add_ic_cb
+ * @until }
+ *
+ * If an icon is required, you can pass it as third paramenter on our
+ * elm_list_item_append() function. It will be place on the
+ * left side of item's label. If an icon is wanted on the right side,
+ * it should be passed as fourth parameter.
+ *
+ * For more details about how to create icons, look for elm_icon examples
+ * @ref tutorial_icon.
+ *
+ * <b> Appending an item with callback function for selected: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _sel_cb
+ * @until }
+ * @until }
+ *
+ * To set a callback function that will be called every time an item is
+ * selected, i.e., everytime the list stops with this item in
+ * center position, just pass the function as fifth paramenter.
+ *
+ * <b> Appending an item with callback function for selected with data: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _sel_data_cb
+ * @until }
+ * @until }
+ * @until }
+ * @until }
+ *
+ * If the callback function request an extra data, it can be attached to our
+ * item passing a pointer for data as sixth parameter.
+ * Our function _sel_data_cb will receive it as <tt> void *data </tt>.
+ *
+ * If you want to free this data, or handle that the way you need when the
+ * item is deleted, set a callback function for that, with
+ * elm_list_item_del_cb_set().
+ *
+ * As you can see we check if @c it is not @c NULL after appending it.
+ * If an error happens, we won't try to set a function for it.
+ *
+ * <b> Deleting an item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _del_cb(
+ * @until }
+ *
+ * To delete an item we simple need to call elm_list_item_del() with
+ * a pointer for such item.
+ *
+ * If you need, you can get selected item with
+ * elm_list_selected_item_get(), that will return a pointer for it.
+ *
+ * <b> Unselecting an item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _unselect_cb
+ * @until }
+ *
+ * To select an item, you should call elm_list_item_selected_set()
+ * passing @c EINA_TRUE, and to unselect it, @c EINA_FALSE.
+ *
+ * <b> Printing all items: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _print_cb
+ * @until }
+ *
+ * <b> Clearing the list: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _clear_cb
+ * @until }
+ *
+ * <b> Selecting the next item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _select_next_cb
+ * @until }
+ *
+ * <b> Inserting after an item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _insert_after_cb
+ * @until }
+ *
+ * <b> Selecting the previous item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _select_prev_cb
+ * @until }
+ *
+ * <b> Inserting before an item: </b>
+ * @dontinclude list_example_03.c
+ * @skipline _insert_before_cb
+ * @until }
+ *
+ * If a separator is required, just set an item as such:
+ * @dontinclude list_example_03.c
+ * @skipline _set_separator_cb
+ * @until }
+ *
+ * Also an item can be disabled, and the user won't be allowed to (un)select it:
+ * @dontinclude list_example_03.c
+ * @skipline _disable_cb
+ * @until }
+ *
+ * See the full @ref list_example_03.c "list_example_03.c"
+ * code, whose window should look like this picture:
+ *
+ * @image html screenshots/list_example_03.png
+ * @image latex screenshots/list_example_03.eps width=\textwidth
+ *
+ * @example list_example_03.c
+ */
+
+/**
+ * @page toolbar_example_01 Toolbar Example - Simple Items
+ *
+ * This code places a Elementary toolbar widget on a window,
+ * to exemplify part of the widget's API.
+ *
+ * Let's start adding a button to our window, that will have its text
+ * modified depending on which item is selected. It's used just to exemplify
+ * how to change a window content from the toolbar.
+ * @dontinclude toolbar_example_01.c
+ * @skipline elm_button_add
+ * @until evas_object_show
+ *
+ * Also, we'll need a toolbar widget, obviously:
+ * @skipline elm_toolbar_add
+ * @until evas_object_show
+ *
+ * When appending an item is possible to set an icon, label, and a callback
+ * function that will receive passed data.
+ * @skipline _item_append
+ * @until Folder
+ *
+ * It's possible to disable items, so the user can't select then. We will
+ * disable the third item:
+ * @skipline _item_append
+ * @until disable
+ *
+ * Our callbacks will just set button's label:
+ * @dontinclude toolbar_example_01.c
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
+ * @until }
+ * @until }
+ *
+ * By default, toolbars would display items homogeneously, so item with
+ * long labels, like the third, will make all of them occupy a lot of space.
+ * To avoid that, we can disable it:
+ * @dontinclude toolbar_example_01.c
+ * @skipline homogeneous
+ *
+ * Another default behavior, is to add an menu item if we have more items
+ * that would fit on toolbar size. To simply enable scroll, without menus,
+ * it's required to change toolbar's shrink mode:
+ * @dontinclude toolbar_example_01.c
+ * @skipline shrink
+ *
+ * See @ref toolbar_example_01.c "toolbar_example_01.c", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/toolbar_example_01.png
+ * @image latex screenshots/toolbar_example_01.eps width=\textwidth
+ *
+ * @example toolbar_example_01.c
+ */
+
+/**
+ * @page toolbar_example_02 Toolbar Example - Items with States
+ *
+ * This code places a Elementary toolbar widget on a window,
+ * to exemplify part of the widget's API.
+ *
+ * Toolbar widgets has support to items with states. Each state
+ * can have it's own label, icon, and callback function.
+ *
+ * Let's start populating a toolbar with some regular items.
+ * If you don't know how to do that, see
+ * @ref toolbar_example_01 "Toolbar Example 1".
+ * @dontinclude toolbar_example_02.c
+ * @skipline elm_toolbar_add
+ * @until Update
+ *
+ * The only difference here is that we set shrink mode to #ELM_SHRINK_MODE_HIDE,
+ * that won't display items that doesn't fit to the window.
+ *
+ * Now, let's add an item with states. First, add the item just as any other.
+ * @skipline elm_toolbar_item_append
+ * @until _item_pressed
+ *
+ * After that states can be added to this item:
+ * @skipline state_add
+ * @until Full
+ * @until _item_pressed
+ *
+ * The both states and the item are using the same callback function,
+ * that will cycle between states and unselect the item. Unseleting
+ * is required because it won't call the callback if an user clicks
+ * over an item already selected:
+ * @dontinclude toolbar_example_02.c
+ * @skip static
+ * @skip }
+ * @skipline static
+ * @until }
+ *
+ * On our example, some items are hidden
+ * because we set the window to be small. But if an item should be displayed
+ * anyway, is needed to set its priority to be higher than others.
+ * Any positive value will be enough in our case. Let's force the item
+ * with multiple states to be displayed.
+ * @skipline priority
+ *
+ * See @ref toolbar_example_02.c "toolbar_example_02.c", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/toolbar_example_02.png
+ * @image latex screenshots/toolbar_example_02.eps width=\textwidth
+ *
+ * @example toolbar_example_02.c
+ */
+
+/**
+ * @page toolbar_example_03 Toolbar Example - Items with Menus
+ *
+ * Toolbar widgets have support to items with menus. This kind
+ * of item will display a menu when selected by the user.
+ *
+ * Let's start populating a toolbar with some regular items, the same
+ * way we started @ref toolbar_example_02 "Toolbar Example 2".
+ * @dontinclude toolbar_example_03.c
+ * @skipline elm_toolbar_add
+ * @until Update
+ *
+ * The only difference is that we'll keep the default shrink mode, that
+ * adds an item with a menu of hidden items.
+ *
+ * So, a important thing to do is to set a parent for toolbar menus, or they
+ * will use the toolbar as parent, and its size will be restricted to that.
+ * @skipline parent_set
+ *
+ * Not only items' menus will respect this parent, but also the own toolbar
+ * menu, used to show hidden items.
+ *
+ * Next, let's add an item set to display a menu:
+ * @skipline elm_toolbar_item_append
+ * @until _menu_set
+ *
+ * Now, to add two options to this item, we can get the menu object and use
+ * it as a regular elm_menu. See @ref tutorial_menu "Menu example" for more
+ * about menu widget.
+ * @skipline _menu_get
+ * @until Full
+ *
+ * See @ref toolbar_example_03.c "toolbar_example_03.c", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/toolbar_example_03.png
+ * @image latex screenshots/toolbar_example_03.eps width=\textwidth
+ *
+ * @example toolbar_example_03.c
+ */
+
+/**
+ * @page segment_control_example Segment Control Example
+ *
+ * This code places a Elementary segment control widgets on a window,
+ * to exemplify part of the widget's API.
+ *
+ * Let's start adding a segment control to our window:
+ * @dontinclude segment_control_example.c
+ * @skipline elm_segment_control_add
+ * @until evas_object_show
+ *
+ * Now will add an item only with label:
+ * @skipline item_add
+ *
+ * Really simple. To add an item with only an icon, the icon needs to be created
+ * first, them added with this same function:
+ * @skipline icon_add
+ * @until item_add
+ *
+ * If an item with label and icon is required, it can be done as well. In this
+ * case, instead of a label (or icon) centered, the item will display an icon
+ * at left and the label at right:
+ * @skipline icon_add
+ * @until item_add
+ *
+ * But, if you need to add some items that can have or not a label, but
+ * want that all of them looks the same way, with icon at left, just add
+ * an empty string label. It's done on our example to ilustrate that:
+ * @skipline icon_add
+ * @until item_add
+ *
+ * So far, all the item were added to the last position of the widget,
+ * but if something different is required, it can be done using another
+ * insertion function. Let's suppose we want to put an item just before
+ * the last item:
+ * @skipline count
+ * @until insert_at
+ *
+ * There are two ways to delete items. Using the item handle, like:
+ * @skipline insert_at
+ * @until del
+ *
+ * Or using item's index:
+ * @skipline insert_at
+ * @until del_at
+ *
+ * To set properties of an item already added to the widget, you just need
+ * to get the item and set icon or label, as the following code shows:
+ * @skipline item_get
+ * @until label_set
+ *
+ * Finally, it's possible to select an item from the code, and also get
+ * the selected item. We will select the item at the center of the widget
+ * and print its position.
+ * @skipline count_get
+ * @until printf
+ *
+ * See the full @ref segment_control_example.c "example", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/segment_control_example.png
+ * @image latex screenshots/segment_control_example.eps width=\textwidth
+ *
+ * @example segment_control_example.c
+ */
+
+/**
+ * @page flipselector_example Flip selector widget example
+ *
+ * This code places an Elementary flip selector widget on a window,
+ * along with two buttons trigerring actions on it (though its API).
+ *
+ * The selector is being populated with the following items:
+ * @dontinclude flipselector_example.c
+ * @skip lbl[]
+ * @until ;
+ *
+ * Next, we create it, populating it with those items and registering
+ * two (smart) callbacks on it:
+ * @dontinclude flipselector_example.c
+ * @skip fp = elm_flipselector_add
+ * @until object_show
+ *
+ * Those two callbacks will take place whenever one of those smart
+ * events occur, and they will just print something to @c stdout:
+ * @dontinclude flipselector_example.c
+ * @skip underflow callback
+ * @until static void
+ * Flip the sheets on the widget while looking at the items list, in
+ * the source code, and you'll get the idea of those events.
+ *
+ * The two buttons below the flip selector will take the actions
+ * described in their labels:
+ * @dontinclude flipselector_example.c
+ * @skip bt = elm_button_add
+ * @until callback_add(win
+ *
+ * @dontinclude flipselector_example.c
+ * @skip unselect the item
+ * @until underflow
+ *
+ * Click on them to exercise those flip selector API calls. To
+ * interact with the other parts of this API, there's a command line
+ * interface, whose help string can be asked for with the 'h' key:
+ * @dontinclude flipselector_example.c
+ * @skip commands
+ * @until ;
+ *
+ * The 'n' and 'p' keys will exemplify elm_flipselector_flip_next()
+ * and elm_flipselector_flip_prev(), respectively. 'f' and 'l' account
+ * for elm_flipselector_first_item_get() and
+ * elm_flipselector_last_item_get(), respectively. Finally, 's' will
+ * issue elm_flipselector_selected_item_get() on our example flip
+ * selector widget.
+ *
+ * See the full @ref flipselector_example.c "example", whose window should
+ * look like this picture:
+ *
+ * @image html screenshots/flipselector_example.png
+ * @image latex screenshots/flipselector_example.eps width=\textwidth
+ *
+ * See the full @ref flipselector_example_c "source code" for this example.
+ *
+ * @example flipselector_example.c
+ */
+
+/**
+ * @page fileselector_example File selector widget example
+ *
+ * This code places two Elementary file selector widgets on a window.
+ * The one on the left is layouting file system items in a @b list,
+ * while the the other is layouting them in a @b grid.
+ *
+ * The one having the majority of hooks of interest is on the left,
+ * which we create as follows:
+ * @dontinclude fileselector_example.c
+ * @skip first file selector
+ * @until object_show
+ *
+ * Note that we enable custom edition of file/directory selection, via
+ * the text entry it has on its bottom, via
+ * elm_fileselector_is_save_set(). It starts with the list view, which
+ * is the default, and we make it not expandable in place
+ * (elm_fileselector_expandable_set()), so that it replaces its view's
+ * contents with the current directory's entries each time one
+ * navigates to a different folder. For both of file selectors we are
+ * starting to list the contents found in the @c "/tmp" directory
+ * (elm_fileselector_path_set()).
+ *
+ * Note the code setting it to "grid mode" and observe the differences
+ * in the file selector's views, in the example. We also hide the
+ * second file selector's Ok/Cancel buttons -- since it's there just
+ * to show the grid view (and navigation) -- via
+ * elm_fileselector_buttons_ok_cancel_set().
+ *
+ * The @c "done" event, which triggers the callback below
+ * @dontinclude fileselector_example.c
+ * @skip 'done' cb
+ * @until }
+ * will be called at the time one clicks the "Ok"/"Cancel" buttons of
+ * the file selector (on the left). Note that it will print the path
+ * to the current selection, if any.
+ *
+ * The @c "selected" event, which triggers the callback below
+ * @dontinclude fileselector_example.c
+ * @skip bt = 'selected' cb
+ * @until }
+ * takes place when one selects a file (if the file selector is @b not
+ * under folders-only mode) or when one selects a folder (when in
+ * folders-only mode). Experiment it by selecting different file
+ * system entries.
+ *
+ * What comes next is the code creating the three check boxes and two
+ * buttons below the file selector in the right. They will exercise a
+ * bunch of functions on the file selector's API, for the instance on
+ * the left. Experiment with them, specially the buttons, to get the
+ * difference between elm_fileselector_path_get() and
+ * elm_fileselector_selected_get().
+ *
+ * Finally, there's the code adding the second file selector, on the
+ * right:
+ * @dontinclude fileselector_example.c
+ * @skip second file selector
+ * @until object_show
+ *
+ * Pay attention to the code setting it to "grid mode" and observe the
+ * differences in the file selector's views, in the example. We also
+ * hide the second file selector's Ok/Cancel buttons -- since it's
+ * there just to show the grid view (and navigation) -- via
+ * elm_fileselector_buttons_ok_cancel_set().
+ *
+ * See the full @ref fileselector_example.c "example", whose window
+ * should look like this picture:
+ *
+ * @image html screenshots/fileselector_example.png
+ * @image latex screenshots/fileselector_example.eps width=\textwidth
+ *
+ * See the full @ref fileselector_example_c "source code" for this example.
+ *
+ * @example fileselector_example.c
+ */
+
+/**
+ * @page fileselector_button_example File selector button widget example
+ *
+ * This code places an Elementary file selector button widget on a
+ * window, along with some other checkboxes and a text entry. Those
+ * are there just as knobs on the file selector button's state and to
+ * display information from it.
+ *
+ * Here's how we instantiate it:
+ * @dontinclude fileselector_button_example.c
+ * @skip ic = elm_icon_add
+ * @until evas_object_show
+ *
+ * Note that we set on it both icon and label decorations. It's set to
+ * list the contents of the @c "/tmp" directory, too, with
+ * elm_fileselector_button_path_set(). What follows are checkboxes to
+ * exercise some of its API funtions:
+ * @dontinclude fileselector_button_example.c
+ * @skip ck = elm_check_add
+ * @until evas_object_show(en)
+ *
+ * The checkboxes will toggle whether the file selector button's
+ * internal file selector:
+ * - must have an editable text entry for file names (thus, be in
+ * "save dialog mode")
+ * - is to be raised as an "inner window" (note it's the default
+ * behavior) or as a dedicated window
+ * - is to populate its view with folders only
+ * - is to expand its folders, in its view, <b>in place</b>, and not
+ * repainting it entirely just with the contents of a sole
+ * directory.
+ *
+ * The entry labeled @c "Last selection" will exercise the @c
+ * "file,chosen" smart event coming from the file selector button:
+ * @dontinclude fileselector_button_example.c
+ * @skip hook on the
+ * @until toggle inwin
+ *
+ * Whenever you dismiss or acknowledges the file selector, after it's
+ * raised, the @c event_info string will contain the last selection on
+ * it (if any was made).
+ *
+ * This is how the example, just after called, should look like:
+ *
+ * @image html screenshots/fileselector_button_example_00.png
+ * @image latex screenshots/fileselector_button_example_00.eps width=\textwidth
+ *
+ * Click on the file selector button to raise its internal file
+ * selector, which will be contained on an <b>"inner window"</b>:
+ *
+ * @image html screenshots/fileselector_button_example_01.png
+ * @image latex screenshots/fileselector_button_example_01.eps width=\textwidth
+ *
+ * Toggle the "inwin mode" switch off and, if you click on the file
+ * selector button again, you'll get @b two windows, the original one
+ * (note the last selection there!)
+ *
+ * @image html screenshots/fileselector_button_example_02.png
+ * @image latex screenshots/fileselector_button_example_02.eps width=\textwidth
+ *
+ * and the file selector's new one
+ *
+ * @image html screenshots/fileselector_button_example_03.png
+ * @image latex screenshots/fileselector_button_example_03.eps width=\textwidth
+ *
+ * Play with the checkboxes to get the behavior changes on the file
+ * selector button. The respective API calls on the widget coming from
+ * those knobs where shown in the code already.
+ *
+ * See the full @ref fileselector_button_example_c "source code" for
+ * this example.
+ *
+ * @example fileselector_button_example.c
+ */
+
+/**
+ * @page fileselector_entry_example File selector entry widget example
+ *
+ * This code places an Elementary file selector entry widget on a
+ * window, along with some other checkboxes. Those are there just as
+ * knobs on the file selector entry's state.
+ *
+ * Here's how we instantiate it:
+ * @dontinclude fileselector_entry_example.c
+ * @skip ic = elm_icon_add
+ * @until evas_object_show
+ *
+ * Note that we set on it's button both icon and label
+ * decorations. It's set to exhibit the path of (and list the contents
+ * of, when internal file selector is launched) the @c "/tmp"
+ * directory, also, with elm_fileselector_entry_path_set(). What
+ * follows are checkboxes to exercise some of its API funtions:
+ * @dontinclude fileselector_entry_example.c
+ * @skip ck = elm_check_add
+ * @until callback_add(fs_entry
+ *
+ * The checkboxes will toggle whether the file selector entry's
+ * internal file selector:
+ * - must have an editable text entry for file names (thus, be in
+ * "save dialog mode")
+ * - is to be raised as an "inner window" (note it's the default
+ * behavior) or as a dedicated window
+ * - is to populate its view with folders only
+ * - is to expand its folders, in its view, <b>in place</b>, and not
+ * repainting it entirely just with the contents of a sole
+ * directory.
+ *
+ * Observe how the entry's text will match the string coming from the
+ * @c "file,chosen" smart event:
+ * @dontinclude fileselector_entry_example.c
+ * @skip hook on the
+ * @until }
+ * Whenever you dismiss or acknowledges the file selector, after it's
+ * raised, the @c event_info string will contain the last selection on
+ * it (if any was made).
+ *
+ * Try, also, to type in a valid system path and, then, open the file
+ * selector's window: it will start the file browsing there, for you.
+ *
+ * This is how the example, just after called, should look like:
+ *
+ * @image html screenshots/fileselector_entry_example_00.png
+ * @image latex screenshots/fileselector_entry_example_00.eps width=\textwidth
+ *
+ * Click on the file selector entry to raise its internal file
+ * selector, which will be contained on an <b>"inner window"</b>:
+ *
+ * @image html screenshots/fileselector_entry_example_01.png
+ * @image latex screenshots/fileselector_entry_example_01.eps width=\textwidth
+ *
+ * Toggle the "inwin mode" switch off and, if you click on the file
+ * selector entry again, you'll get @b two windows, the original one
+ * (note the last selection there!)
+ *
+ * @image html screenshots/fileselector_entry_example_02.png
+ * @image latex screenshots/fileselector_entry_example_02.eps width=\textwidth
+ *
+ * and the file selector's new one
+ *
+ * @image html screenshots/fileselector_entry_example_03.png
+ * @image latex screenshots/fileselector_entry_example_03.eps width=\textwidth
+ *
+ * Play with the checkboxes to get the behavior changes on the file
+ * selector entry. The respective API calls on the widget coming from
+ * those knobs where shown in the code already.
+ *
+ * See the full @ref fileselector_entry_example_c "source code" for
+ * this example.
+ *
+ * @example fileselector_entry_example.c
+ */
+
+/**
+ * @page layout_example_01 Layout - Content, Table and Box
+ *
+ * This example shows how one can use the @ref Layout widget to create a
+ * customized distribution of widgets on the screen, controled by an Edje theme.
+ * The full source code for this example can be found at @ref
+ * layout_example_01_c.
+ *
+ * Our custom layout is defined by a file, @ref layout_example_edc, which is an
+ * Edje theme file. Look for the Edje documentation to understand it. For now,
+ * it's enough to know that we describe some specific parts on this layout
+ * theme:
+ * @li a title text field;
+ * @li a box container;
+ * @li a table container;
+ * @li and a content container.
+ *
+ * Going straight to the code, the following snippet instantiates the layout
+ * widget:
+ *
+ * @dontinclude layout_example_01.c
+ * @skip elm_layout_add
+ * @until evas_object_show(layout)
+ *
+ * As any other widget, we set some properties for the size calculation. But
+ * notice on this piece of code the call to the function elm_layout_file_set().
+ * Here is where the theme file is loaded, and particularly the specific group
+ * from this theme file. Also notice that the theme file here is referenced as
+ * an .edj, which is a .edc theme file compiled to its binary form. Again, look
+ * for the Edje documentation for more information about theme files.
+ *
+ * Next, we fetch from our theme a data string referenced by the key "title".
+ * This data was defined in the theme, and can be used as parameters which the
+ * program get from the specific theme that it is using. In this case, we store
+ * the title of this window and program in the theme, as a "data" entry, just
+ * for demonstration purposes:
+ *
+ * @until }
+ *
+ * This call elm_layout_data_get() is used to fetch the string based on the key,
+ * and elm_object_part_text_set() will set the part defined in the theme as
+ * "example/title" to contain this string. This key "example/title" has nothing
+ * special. It's just an arbitrary convention that we are using in this example.
+ * Every string in this example referencing a part of this theme will be of the
+ * form "example/<something>".
+ *
+ * Now let's start using our layout to distribute things on the window space.
+ * Since the layout was added as a resize object to the elementary window, it
+ * will always occupy the entire space available for this window.
+ *
+ * The theme already has a title, and it also defines a table element which is
+ * positioned approximately between 50% and 70% of the height of this window,
+ * and has 100% of the width. We create some widgets (two icons, a clock and a
+ * button) and pack them inside the table, in a distribution similar to a HTML
+ * table:
+ *
+ * @until evas_object_show(bt)
+ *
+ * Notice that we just set size hints for every object, and call the function
+ * elm_layout_table_pack(), which does all the work. It will place the elements
+ * in the specified row/column, with row and column span if required, and then
+ * the object's size and position will be controled by the layout widget. It
+ * will also respect size hints, alignments and weight properties set to these
+ * widgets. The resulting distribution on the screen depends on the table
+ * properties (described in the theme), the size hints set on each widget, and
+ * on the cells of the table that are being used.
+ *
+ * For instance, we add the two icons and the clock on the first, second and
+ * third cells of the first row, and add the button the second row, making it
+ * span for 3 columns (thus having the size of the entire table width). This
+ * will result in a table that has 2 rows and 3 columns.
+ *
+ * Now let's add some widgets to the box area of our layout. This box is around
+ * 20% and 50% of the vertical size of the layout, and 100% of its width. The
+ * theme defines that it will use an "horizontal flow" distribution to its
+ * elements. Unlike the table, a box will distribute elements without knowing
+ * about rows and columns, and the distribution function selected will take care
+ * of putting them in row, column, both, or any other available layout. This is
+ * also described in the Edje documentation.
+ *
+ * This box area is similar to the @ref Box widget of elementary, with the
+ * difference that its position and properties are controled by the theme of the
+ * layout. It also contains more than one API to add items to it, since the
+ * items position now is defined in terms of a list of items, not a matrix.
+ * There's the first position (can have items added to it with
+ * elm_layout_box_prepend()), the last position (elm_layout_box_append()), the
+ * nth position (elm_layout_box_insert_at()) and the position right before an
+ * element (elm_layout_box_insert_before()). We use insert_at and prepend
+ * functions to add the first two buttons to this box, and insert_before on the
+ * callback of each button. The callback code will be shown later, but it
+ * basically adds a button just before the clicked button using the
+ * elm_layout_box_insert_before() function. Here's the code for adding the first
+ * 2 buttons:
+ *
+ * @until evas_object_show(item)
+ * @until evas_object_show(item)
+ *
+ * Finally, we have an area in this layout theme, in the bottom part of it,
+ * reserved for adding an specific widget. Differently from the 2 parts
+ * described until now, this one can only receive one widget with the call
+ * elm_object_part_content_set() for the layout. If there was already an item on this specific part,
+ * it will be deleted (one can use elm_object_part_content_unset() in order to remove
+ * it without deleting). An example of removing it without deleting, but
+ * manually deleting this widget just after that, can be seen on the callback
+ * for this button. Actually, the callback defined for this button will clean
+ * the two other parts (deleting all of their elements) and then remove and
+ * delete this button.
+ *
+ * @until _swallow_btn_cb
+ *
+ * Also notice that, for this last added button, we don't have to call
+ * evas_object_show() on it. This is a particularity of the theme for layouts,
+ * that will have total control over the properties like size, position,
+ * visibility and clipping of a widget added with elm_object_part_content_set().
+ * Again, read the Edje documentation to understand this better.
+ *
+ * Now we just put the code for the different callbacks specified for each kind
+ * of button and make simple comments about them:
+ *
+ * @dontinclude layout_example_01.c
+ * @skip static void
+ * @until evas_object_del(item)
+ * @until }
+ *
+ * The first callback is used for the button in the table, and will just remove
+ * itself from the table with elm_layout_table_unpack(), which remove items
+ * without deleting them, and then calling evas_object_del() on itself.
+ *
+ * The second callback is for buttons added to the box. When clicked, these
+ * buttons will create a new button, and add them to the same box, in the
+ * position just before the clicked button.
+ *
+ * And the last callback is for the button added to the "content" area. It will
+ * clear both the table and the box, passing @c EINA_TRUE to their respective @c
+ * clear parameters, which will imply on the items of these containers being
+ * deleted.
+ *
+ * A screenshot of this example can be seen on:
+ *
+ * @image html screenshots/layout_example_01.png
+ * @image latex screenshots/layout_example_01.eps width=\textwidth
+ *
+ */
+
+/**
+ * @page layout_example_02 Layout - Predefined Layout
+ *
+ * This example shows how one can use the @ref Layout with a predefined theme
+ * layout to add a back and next button to a simple window. The full source code
+ * for this example can be found at @ref layout_example_02_c.
+ *
+ * After setting up the window and background, we add the layout widget to the
+ * window. But instead of using elm_layout_file_set() to load its theme from a
+ * custom theme file, we can use elm_layout_theme_set() to load one of the
+ * predefined layouts that come with elementary. Particularly on this example,
+ * we load the them of class "layout", group "application" and style
+ * "content-back-next" (since we want the back and next buttons).
+ *
+ * @dontinclude layout_example_02.c
+ * @skip elm_layout_add
+ * @until evas_object_show(layout)
+ *
+ * This default theme contains only a "content" area named
+ * "elm.swallow.content", where we can add any widget (it can be even a
+ * container widget, like a box, frame, list, or even another layout). Since we
+ * just want to show the resulting layout, we add a simple icon to it:
+ *
+ * @until layout_content_set
+ *
+ * This default layout also provides some signals when the next and prev buttons
+ * are clicked. We can register callbacks to them with the
+ * elm_object_signal_callback_add() function:
+ *
+ * @until elm,action,next
+ *
+ * In the @ref layout_example_03 you can see how to send signals to the layout with
+ * elm_object_signal_emit().
+ *
+ * Now our callback just changes the picture being displayed when one of the
+ * buttons are clicked:
+ *
+ * @dontinclude layout_example_02.c
+ * @skip images
+ * @until standard_set
+ * @until }
+ *
+ * It's possible to see that it gets the name of the image being shown from the
+ * array of image names, going forward on this array when "next" is clicked and
+ * backward when "back" is clicked.
+ *
+ * A screenshot of this example can be seen on:
+ *
+ * @image html screenshots/layout_example_02.png
+ * @image latex screenshots/layout_example_02.eps width=\textwidth
+ */
+
+/**
+ * @page layout_example_03 Layout - Signals and Size Changed
+ *
+ * This example shows how one can send and receive signals to/from the layout,
+ * and what to do when the layout theme has its size changed. The full source
+ * code for this example can be found at @ref layout_example_03_c.
+ *
+ * In this exmaple we will use another group from the same layout theme file
+ * used in @ref layout_example_01. Its instanciation and loading happens in the
+ * following lines:
+ *
+ * @dontinclude layout_example_03.c
+ * @skip elm_layout_add
+ * @until evas_object_show
+ *
+ * This time we register a callback to be called whenever we receive a signal
+ * after the end of the animation that happens in this layout:
+ *
+ * @until signal_callback_add
+ *
+ * We also add a button that will send signals to the layout:
+ *
+ * @until callback_add
+ *
+ * The callback for this button will check what type of signal it should send,
+ * and then emit it. The code for this callback follows:
+ *
+ * @dontinclude layout_example_03.c
+ * @skip static Eina_Bool
+ * @until Enlarge
+ * @until }
+ * @until }
+ *
+ * As we said before, we are receiving a signal whenever the animation started
+ * by the button click ends. This is the callback for that signal:
+ *
+ * @until }
+ *
+ * Notice from this callback that the elm_layout_sizing_eval() function must be
+ * called if we want our widget to update its size after the layout theme having
+ * changed its minimum size. This happens because the animation specified in the
+ * theme increases the size of the content area to a value higher than the
+ * widget size, thus requiring more space. But the elementary layout widget
+ * has no way to know this, thus needing the elm_layout_sizing_eval() to
+ * be called on the layout, informing that this size has changed.
+ *
+ * A screenshot of this example can be seen on:
+ *
+ * @image html screenshots/layout_example_03.png
+ * @image latex screenshots/layout_example_03.eps width=\textwidth
+ */
+
+/**
+ * @page tutorial_hover Hover example
+ * @dontinclude hover_example_01.c
+ *
+ * On this example we are going to have a button that when clicked will show our
+ * hover widget, this hover will have content set on it's left, top, right and
+ * middle positions. In the middle position we are placing a button that when
+ * clicked will hide the hover. We are also going to use a non-default theme
+ * for our hover. We won't explain the functioning of button for that see @ref
+ * Button.
+ *
+ * We start our example with a couple of callbacks that show and hide the data
+ * they're given(which we'll see later on is the hover widget):
+ * @skip static
+ * @until }
+ * @until }
+ *
+ * In our main function we'll do some initialization and then create 3
+ * rectangles, one red, one green and one blue to use in our hover. We'll also
+ * create the 2 buttons that will show and hide the hover:
+ * @until show(bt2)
+ *
+ * With all of that squared away we can now get to the heart of the matter,
+ * creating our hover widget, which is easy as pie:
+ * @until hover
+ *
+ * Having created our hover we now need to set the parent and target. Which if
+ * you recall from the function documentations are going to tell the hover which
+ * area it should cover and where it should be centered:
+ * @until bt
*
* Now we set the theme for our hover. We're using the popout theme which gives
* our contents a white background and causes their appearance to be animated:
* @until popout
*
- * And finally we set the content for our positions:
- * @until bt2
+ * And finally we set the content for our positions:
+ * @until bt2
+ *
+ * So far so good? Great 'cause that's all there is too it, what is left now is
+ * just connecting our buttons to the callbacks we defined at the beginning of
+ * the example and run the main loop:
+ * @until ELM_MAIN
+ *
+ * Our example will initially look like this:
+ *
+ * @image html screenshots/hover_example_01.png
+ * @image latex screenshots/hover_example_01.eps width=\textwidth
+ *
+ * And after you click the "Show hover" button it will look like this:
+ *
+ * @image html screenshots/hover_example_01_a.png
+ * @image latex screenshots/hover_example_01_a.eps width=\textwidth
+ *
+ * @example hover_example_01.c
+ */
+
+/**
+ * @page tutorial_flip Flip example
+ * @dontinclude flip_example_01.c
+ *
+ * This example will show a flip with two rectangles on it(one blue, one
+ * green). Our example will allow the user to choose the animation the flip
+ * uses and to interact with it. To allow the user to choose the interaction
+ * mode we use radio buttons, we will however not explain them, if you would
+ * like to know more about radio buttons see @ref Radio.
+ *
+ * We start our example with the usual setup and then create the 2 rectangles
+ * we will use in our flip:
+ * @until show(rect2)
+ *
+ * The next thing to do is to create our flip and set it's front and back
+ * content:
+ * @until show
+ *
+ * The next thing we do is set the interaction mode(which the user can later
+ * change) to the page animation:
+ * @until PAGE
+ *
+ * Setting a interaction mode however is not sufficient, we also need to
+ * choose which directions we allow interaction from, for this example we
+ * will use all of them:
+ * @until RIGHT
+ *
+ * We are also going to set the hitsize to the entire flip(in all directions)
+ * to make our flip very easy to interact with:
+ * @until RIGHT
+ *
+ * After that we create our radio buttons and start the main loop:
+ * @until ELM_MAIN()
+ *
+ * When the user clicks a radio button a function that changes the
+ * interaction mode and animates the flip is called:
+ * @until }
+ * @note The elm_flip_go() call here serves no purpose other than to
+ * ilustrate that it's possible to animate the flip programmatically.
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/flip_example_01.png
+ * @image latex screenshots/flip_example_01.eps width=\textwidth
+ *
+ * @note Since this is an animated example the screenshot doesn't do it
+ * justice, it is a good idea to compile it and see the animations.
+ *
+ * @example flip_example_01.c
+ */
+
+ /**
+ * @page tutorial_label Label example
+ * @dontinclude label_example_01.c
+ *
+ * In this example we are going to create 6 labels, set some properties on
+ * them and see what changes in appearance those properties cause.
+ *
+ * We start with the setup code that by now you should be familiar with:
+ * @until show(bg)
+ *
+ * For our first label we have a moderately long text(that doesn't fit in the
+ * label's width) so we will make it a sliding label. Since the text isn't
+ * too long we don't need the animation to be very long, 3 seconds should
+ * give us a nice speed:
+ * @until show(label
+ *
+ * For our second label we have the same text, but this time we aren't going
+ * to have it slide, we're going to ellipsize it. Because we ask our label
+ * widget to ellipsize the text it will first diminsh the fontsize so that it
+ * can show as much of the text as possible:
+ * @until show(label
+ *
+ * For the third label we are going to ellipsize the text again, however this
+ * time to make sure the fontsize isn't diminshed we will set a line wrap.
+ * The wrap won't actually cause a line break because we set the label to
+ * ellipsize:
+ * @until show(label
+ *
+ * For our fourth label we will set line wrapping but won't set ellipsis, so
+ * that our text will indeed be wrapped instead of ellipsized. For this label
+ * we choose character wrap:
+ * @until show(label
+ *
+ * Just two more, for our fifth label we do the same as for the fourth
+ * except we set the wrap to word:
+ * @until show(label
+ *
+ * And last but not least for our sixth label we set the style to "marker" and
+ * the color to red(the default color is white which would be hard to see on
+ * our white background):
+ * @until show(label
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/label_example_01.png
+ * @image latex screenshots/label_example_01.eps width=\textwidth
+ *
+ * @example label_example_01.c
+ */
+
+ /**
+ * @page tutorial_image Image example
+ * @dontinclude image_example_01.c
+ *
+ * This example is as simple as possible. An image object will be added to the
+ * window over a white background, and set to be resizable together with the
+ * window. All the options set through the example will affect the behavior of
+ * this image.
+ *
+ * We start with the code for creating a window and its background, and also
+ * add the code to write the path to the image that will be loaded:
+ *
+ * @skip int
+ * @until snprintf
+ *
+ * Now we create the image object, and set that file to be loaded:
+ *
+ * @until }
+ *
+ * We can now go setting our options.
+ *
+ * elm_image_no_scale_set() is used just to set this value to true (we
+ * don't want to scale our image anyway, just resize it).
+ *
+ * elm_image_scale_set() is used to allow the image to be resized to a size
+ * smaller than the original one, but not to a size bigger than it.
+ *
+ * elm_elm_image_smooth_set() will disable the smooth scaling, so the scale
+ * algorithm used to scale the image to the new object size is going to be
+ * faster, but with a lower quality.
+ *
+ * elm_image_orient_set() is used to flip the image around the (1, 0) (0, 1)
+ * diagonal.
+ *
+ * elm_image_aspect_ratio_retained_set() is used to keep the original aspect
+ * ratio of the image, even when the window is resized to another aspect ratio.
+ *
+ * elm_image_fill_outside_set() is used to ensure that the image will fill the
+ * entire area available to it, even if keeping the aspect ratio. The image
+ * will overflow its width or height (any of them that is necessary) to the
+ * object area, instead of resizing the image down until it can fit entirely in
+ * this area.
+ *
+ * elm_image_editable_set() is used just to cover the API, but won't affect
+ * this example since we are not using any copy & paste property.
+ *
+ * This is the code for setting these options:
+ *
+ * @until editable
+ *
+ * Now some last touches in our object size hints, window and background, to
+ * display this image properly:
+ *
+ * @until ELM_MAIN
+ *
+ * This example will look like this:
+ *
+ * @image html screenshots/image_example_01.png
+ * @image latex screenshots/image_example_01.eps width=\textwidth
+ *
+ * @example image_example_01.c
+ */
+
+ /**
+ * @page tutorial_icon Icon example
+ * @dontinclude icon_example_01.c
+ *
+ * This example is as simple as possible. An icon object will be added to the
+ * window over a white background, and set to be resizable together with the
+ * window. All the options set through the example will affect the behavior of
+ * this icon.
+ *
+ * We start with the code for creating a window and its background:
+ *
+ * @skip int
+ * @until show(bg)
+ *
+ * Now we create the icon object, and set lookup order of the icon, and choose
+ * the "home" icon:
+ *
+ * @until home
+ *
+ * An intersting thing is that after setting this, it's possible to check where
+ * in the filesystem is the theme used by this icon, and the name of the group
+ * used:
+ *
+ * @until printf
+ *
+ * We can now go setting our options.
+ *
+ * elm_icon_no_scale_set() is used just to set this value to true (we
+ * don't want to scale our icon anyway, just resize it).
+ *
+ * elm_icon_scale_set() is used to allow the icon to be resized to a size
+ * smaller than the original one, but not to a size bigger than it.
+ *
+ * elm_elm_icon_smooth_set() will disable the smooth scaling, so the scale
+ * algorithm used to scale the icon to the new object size is going to be
+ * faster, but with a lower quality.
+ *
+ * elm_icon_fill_outside_set() is used to ensure that the icon will fill the
+ * entire area available to it, even if keeping the aspect ratio. The icon
+ * will overflow its width or height (any of them that is necessary) to the
+ * object area, instead of resizing the icon down until it can fit entirely in
+ * this area.
+ *
+ * This is the code for setting these options:
+ *
+ * @until fill_outside
+ *
+ * However, if you try this example you may notice that this image is not being
+ * affected by all of these options. This happens because the used icon will be
+ * from elementary theme, and thus it has its own set of options like smooth
+ * scaling and fill_outside options. You can change the "home" icon to use some
+ * image (from your system) and see that then those options will be respected.
+ *
+ * Now some last touches in our object size hints, window and background, to
+ * display this icon properly:
+ *
+ * @until ELM_MAIN
+ *
+ * This example will look like this:
+ *
+ * @image html screenshots/icon_example_01.png
+ * @image latex screenshots/icon_example_01.eps width=\textwidth
+ *
+ * @example icon_example_01.c
+ */
+
+/**
+ * @page tutorial_hoversel Hoversel example
+ * @dontinclude hoversel_example_01.c
+ *
+ * In this example we will create a hoversel with 3 items, one with a label but
+ * no icon and two with both a label and an icon. Every item that is clicked
+ * will be deleted, but everytime the hoversel is activated we will also add an
+ * item. In addition our first item will print all items when clicked and our
+ * third item will clear all items in the hoversel.
+ *
+ * We will start with the normal creation of window stuff:
+ * @until show(bg)
+ *
+ * Next we will create a red rectangle to use as the icon of our hoversel:
+ * @until show
+ *
+ * And now we create our hoversel and set some of it's properties. We set @p win
+ * as its parent, ask it to not be horizontal(be vertical) and give it a label
+ * and icon:
+ * @until icon_set
+ *
+ * Next we will add our three items, setting a callback to be called for the
+ * first and third:
+ * @until _rm_items
+ *
+ * We also set a pair of callbacks to be called whenever any item is selected or
+ * when the hoversel is activated:
+ * @until clicked
+ *
+ * And then ask that our hoversel be shown and run the main loop:
+ * @until ELM_MAIN
+ *
+ * We now have the callback for our first item which prints all items in the
+ * hoversel:
+ * @until }
+ *
+ * Next we have the callback for our third item which removes all items from the
+ * hoversel:
+ * @until }
+ *
+ * Next we have the callback that is called whenever an item is clicked and
+ * deletes that item:
+ * @until }
+ *
+ * And the callback that is called when the hoversel is activated and adds an
+ * item to the hoversel. Note that since we allocate memory for the item we need
+ * to know when the item dies so we can free that memory:
+ * @until }
+ *
+ * And finally the callback that frees the memory we allocated for items created
+ * in the @p _add_item callback:
+ * @until }
+ *
+ * Our example will initially look like this:
+ *
+ * @image html screenshots/hoversel_example_01.png
+ * @image latex screenshots/hoversel_example_01.eps width=\textwidth
+ *
+ * And when the hoversel is clicked it will look like this:
+ *
+ * @image html screenshots/hoversel_example_01_a.png
+ * @image latex screenshots/hoversel_example_01_a.eps width=\textwidth
+ *
+ * @example hoversel_example_01.c
+ */
+
+/**
+ * @page conformant_example Conformant Example.
+ *
+ * In this example we'll explain how to create applications to work
+ * with illume, considering space required for virtual keyboards, indicator
+ * and softkeys.
+ *
+ * Illume is a module for Enlightenment that modifies the user interface
+ * to work cleanly and nicely on a mobile device. It has support for
+ * virtual keyboard, among other nice features.
+ *
+ * Let's start creating a very simple window with a vertical box
+ * with multi-line entry between two buttons.
+ * This entry will expand filling all space on window not used by buttons.
+ *
+ * @dontinclude conformant_example_01.c
+ * @skipline elm_main
+ * @until }
+ *
+ * For information about how to create windows, boxes, buttons or entries,
+ * look for documentation for these widgets.
+ *
+ * It will looks fine when you don't need a virtual keyboard, as you
+ * can see on the following image:
+ *
+ * @image html screenshots/conformant_example_01.png
+ * @image latex screenshots/conformant_example_01.eps width=\textwidth
+ *
+ * But if you call a virtual keyboard, the window will resize, changing
+ * widgets size and position. All the content will shrink.
+ *
+ * If you don't want such behaviour, you
+ * will need a conformant to account for space taken up by the indicator,
+ * virtual keyboard and softkey.
+ *
+ * In this case, using the conformant in a proper way, you will have
+ * a window like the following:
+ *
+ * @image html screenshots/conformant_example_02.png
+ * @image latex screenshots/conformant_example_02.eps width=\textwidth
+ *
+ * As you can see, it guess the space that will be required by the keyboard,
+ * indicator and softkey bars.
+ *
+ * So, let's study each step required to transform our initial example on
+ * the second one.
+ *
+ * First of all, we need to set the window as an illume conformant window:
+ * @dontinclude conformant_example_02.c
+ * @skipline elm_win_conformant_set
+ *
+ * Next, we'll add a conformant widget, and set it to resize with the window,
+ * instead of the box.
+ * @skipline conform
+ * @until evas_object_show
+ *
+ * Finally, we'll set the box as conformant's content, just like this:
+ * @skipline elm_object_content_set
+ *
+ * Compare both examples code:
+ * @ref conformant_example_01.c "conformant_example_01.c"
+ * @ref conformant_example_02.c "conformant_example_02.c"
+ *
+ * @example conformant_example_01.c
+ * @example conformant_example_02.c
+ */
+
+/**
+ * @page index_example_01 Index widget example 1
+ *
+ * This code places an Elementary index widget on a window, which also
+ * has a very long list of arbitrary strings on it. The list is
+ * sorted alphabetically and the index will be used to index the first
+ * items of each set of strings beginning with an alphabet letter.
+ *
+ * Below the list are some buttons, which are there just to exercise
+ * some index widget's API.
+ *
+ * Here's how we instantiate it:
+ * @dontinclude index_example_01.c
+ * @skip elm_list_add
+ * @until evas_object_show(d.index)
+ * where we're showing also the list being created. Note that we issue
+ * elm_win_resize_object_add() on the index, so that it's set to have
+ * the whole window as its container. Then, we have to populate both
+ * list and index widgets:
+ * @dontinclude index_example_01.c
+ * @skip for (i = 0; i < (sizeof(dict) / sizeof(dict[0])); i++)
+ * @until }
+ * @until }
+ *
+ * The strings populating the list come from a file
+ * @dontinclude index_example_01.c
+ * @skip static const char *dict
+ * @until }
+ *
+ * We use the @c curr char variable to hold the last initial letter
+ * seen on that ordered list of strings, so that we're able to have an
+ * index item pointing to each list item starting a new letter
+ * "section". Note that our index item data pointers will be the list
+ * item handles. We are also setting a callback function to index
+ * items deletion events:
+ * @dontinclude index_example_01.c
+ * @skip static void
+ * @until }
+ *
+ * There, we show you that the @c event_info pointer will contain the
+ * item in question's data, i.e., a given list item's pointer. Because
+ * item data is also returned in the @c data argument on
+ * @c Evas_Smart_Cb functions, those two pointers must have the same
+ * values. On this deletion callback, we're deleting the referred list
+ * item too, just to exemplify that anything could be done there.
+ *
+ * Next, we hook to two smart events of the index object:
+ * @dontinclude index_example_01.c
+ * @skip smart_callback_add(d.index
+ * @until _index_selected
+ * @dontinclude index_example_01.c
+ * @skip "delay,changed" hook
+ * @until }
+ * @until }
+ *
+ * Check that, whenever one holds the mouse pressed over a given index
+ * letter for some time, the list beneath it will roll down to the
+ * item pointed to by that index item. When one releases the mouse
+ * button, the second callback takes place. There, we check that the
+ * reported item data, on @c event_info, is the same reported by
+ * elm_index_item_selected_get(), which gives the last selection's
+ * data on the index widget.
+ *
+ * The first of the three buttons that follow will call
+ * elm_index_active_set(), thus showing the index automatically for
+ * you, if it's not already visible, what is checked with
+ * elm_index_active_get(). The second button will exercise @b deletion
+ * of index item objects, by the following code:
+ * @dontinclude index_example_01.c
+ * @skip delete an index item
+ * @until }
+ *
+ * It will get the last index item selected's data and find the
+ * respective #Elm_Index_Item handle with elm_index_item_find(). We
+ * need the latter to query the indexing letter string from, with
+ * elm_index_item_letter_get(). Next, comes the delition, itself,
+ * which will also trigger the @c _index_item_del callback function,
+ * as said above.
+ *
+ * The third button, finally, will exercise elm_index_item_clear(),
+ * which will delete @b all of the index's items.
+ *
+ * This is how the example program's window looks like with the index
+ * widget hidden:
+ * @image html screenshots/index_example_00.png
+ * @image latex screenshots/index_example_00.eps
+ *
+ * When it's shown, it's like the following figure:
+ * @image html screenshots/index_example_01.png
+ * @image latex screenshots/index_example_01.eps
+ *
+ * See the full @ref index_example_01_c "source code" for
+ * this example.
+ *
+ * @example index_example_01.c
+ */
+
+/**
+ * @page index_example_02 Index widget example 2
+ *
+ * This code places an Elementary index widget on a window, indexing
+ * grid items. The items are placed so that their labels @b don't
+ * follow any order, but the index itself is ordered (through
+ * elm_index_item_sorted_insert()). This is a complement to to @ref
+ * index_example_01 "the first example on indexes".
+ *
+ * Here's the list of item labels to be used on the grid (in that
+ * order):
+ * @dontinclude index_example_02.c
+ * @skip static const char *items
+ * @until };
+ *
+ * In the interesting part of the code, here, we first instantiate the
+ * grid (more on grids on their examples) and, after creating our
+ * index, for each grid item we also create an index one to reference
+ * it:
+ * @dontinclude index_example_02.c
+ * @skip grid = elm_gengrid_add
+ * @until }
+ * @until smart_callback_add
+ *
+ * The order in which they'll appear in the index, though, is @b
+ * alphabetical, becase of elm_index_item_sorted_insert() usage
+ * together with the comparing function, where we take the letters of
+ * each index item to base our ordering on. The parameters on
+ * @c _index_cmp have to be declared as void pointers because of the
+ * @c Eina_Compare_Cb prototype requisition, but in this case we know
+ * they'll be #Elm_Index_Item's:
+ * @dontinclude index_example_02.c
+ * @skip ordering alphabetically
+ * @until }
+ *
+ * The last interesting bit is the callback in the @c "delay,changed"
+ * smart event, which will bring the given grid item to the grid's
+ * visible area:
+ * @dontinclude index_example_02.c
+ * @skip static void
+ * @until }
+ *
+ * Note how the grid will move kind of randomly while you move your
+ * mouse pointer held over the index from top to bottom -- that's
+ * because of the the random order the items have in the grid itself.
+ *
+ * This is how the example program's window looks like:
+ * @image html screenshots/index_example_03.png
+ * @image latex screenshots/index_example_03.eps
+ *
+ * See the full @ref index_example.c "source code" for
+ * this example.
+ *
+ * @example index_example_02.c
+ */
+
+/**
+ * @page tutorial_ctxpopup Ctxpopup example
+ * @dontinclude ctxpopup_example_01.c
+ *
+ * In this example we have a list with two items, when either item is clicked
+ * a ctxpopup for it will be shown. Our two ctxpopups are quite different, the
+ * one for the first item is a vertical and it's items contain both labels and
+ * icons, the one for the second item is horizontal and it's items have icons
+ * but not labels.
+ *
+ * We will begin examining our example code by looking at the callback we'll use
+ * when items in the ctxpopup are clicked. It's very simple, all it does is
+ * print the label present in the ctxpopup item:
+ * @until }
+ *
+ * Next we examine a function that creates ctxpopup items, it was created to
+ * avoid repeating the same code whenever we needed to add an item to our
+ * ctxpopup. Our function creates an icon from the standard set of icons, and
+ * then creates the item, with the label received as an argument. We also set
+ * the callback to be called when the item is clicked:
+ * @until }
+ *
+ * Finally we have the function that will create the ctxpopup for the first item
+ * in our list. This one is somewhat more complex though, so let's go through it
+ * in parts. First we declare our variable and add the ctxpopup:
+ * @until ctxpopup_add
+ *
+ * Next we create a bunch of items for our ctxpopup, marking two of them as
+ * disabled just so we can see what that will look like:
+ * @until disabled_set
+ * @until disabled_set
+ *
+ * Then we ask evas where the mouse pointer was so that we can have our ctxpopup
+ * appear in the right place, set a maximum size for the ctxpopup, move it and
+ * show it:
+ * @until show
+ *
+ * And last we mark the list item as not selected:
+ * @until }
+ *
+ * Our next function is the callback that will create the ctxpopup for the
+ * second list item, it is very similar to the previous function. A couple of
+ * interesting things to note is that we ask our ctxpopup to be horizontal, and
+ * that we pass NULL as the label for every item:
+ * @until }
+ *
+ * And with all of that in place we can now get to our main function where we
+ * create the window, the list, the list items and run the main loop:
+ * @until ELM_MAIN()
+ *
+ * The example will initially look like this:
+ *
+ * @image html screenshots/ctxpopup_example_01.png
+ * @image latex screenshots/ctxpopup_example_01.eps width=\textwidth
+ *
+ * @note This doesn't show the ctxpopup tough, since it will only appear when
+ * we click one of the list items.
+ *
+ * Here is what our first ctxpopup will look like:
+ *
+ * @image html screenshots/ctxpopup_example_01_a.png
+ * @image latex screenshots/ctxpopup_example_01_a.eps width=\textwidth
+ *
+ * And here the second ctxpopup:
+ *
+ * @image html screenshots/ctxpopup_example_01_b.png
+ * @image latex screenshots/ctxpopup_example_01_b.eps width=\textwidth
+ *
+ * @example ctxpopup_example_01.c
+ */
+
+/**
+ * @page tutorial_pager
+ * @dontinclude pager_example_01.c
+ *
+ * In this example we'll have a pager with 3 rectangles on it, one blue, one
+ * green and one blue, we'll also have 1 button for each rectangle. Pressing a
+ * button will bring the associated rectangle to the front of the pager(promote
+ * it).
+ *
+ * We start our example with some run of the mill code that you've seen in other
+ * examples:
+ * @until show
+ *
+ * And then we get right to creating our pager, setting a style and some basic
+ * properties to it:
+ * @until show
+ *
+ * Well a pager without any content is not of much use, so let's create the
+ * first of our rectangles, add it to the pager and create the button for it:
+ * @until smart_callback
+ * @note The only line of above code that directly relates to our pager is the
+ * call to elm_pager_content_push().
+ *
+ * And now we will do the same thing again twice for our next two rectangles:
+ * @until smart_callback
+ * @until smart_callback
+ *
+ * Now that we haver our widgets create we can get to running the main loop:
+ * @until ELM_MAIN
+ *
+ * We also have the callback that is called when any of the buttons is pressed,
+ * this callback is receiving the rectangle in it's @p data argument, so we
+ * check if it's already on top and if not move it there:
+ * @until }
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/pager_example_01.png
+ * @image latex screenshots/pager_example_01.eps width=\textwidth
+ * @note Like all examples that involve animations the screenshot doesn't do it
+ * justice, seeing it in action is a must.
+ *
+ * @example pager_example_01.c
+ */
+
+/**
+ * @page tutorial_separator Separator example
+ * @dontinclude separator_example_01.c
+ *
+ * In this example we are going to pack two rectangles in a box, and have a
+ * separator in the middle.
+ *
+ * So we start we the window, background, box and rectangle creation, all pretty
+ * normal stuff:
+ * @until pack_end
+ *
+ * Once we have our first rectangle in the box we create and add our separator:
+ * @until pack_end
+ * @note Since our box is in horizontal mode it's a good idea to set the
+ * separator to be horizontal too.
+ *
+ * And now we add our second rectangle and run the main loop:
+ * @until ELM_MAIN
+ *
+ * This example will look like this:
+ *
+ * @image html screenshots/separator_example_01.png
+ * @image latex screenshots/separator_example_01.eps width=\textwidth
+ *
+ * @example separator_example_01.c
+ */
+
+/**
+ * @page tutorial_radio Radio example
+ * @dontinclude radio_example_01.c
+ *
+ * In this example we will create 4 radio buttons, three of them in a group and
+ * another one not in the group. We will also have the radios in the group
+ * change the value of a variable directly and have then print it when the value
+ * changes. The fourth button is in the example just to make clear that radios
+ * outside the group don't affect the group.
+ *
+ * We'll start with the usual includes:
+ * @until #endif
+ *
+ * And move right to declaring a static variable(the one whose value the radios
+ * will change):
+ * @until static
+ *
+ * We now need to have a window and all that good stuff to be able to place our
+ * radios in:
+ * @until show(bx)
+ *
+ * And now we create a radio button, since this is the first button in our group
+ * we set the group to be the radio(so we can set the other radios in the same
+ * group). We also set the state value of this radio to 1 and the value pointer
+ * to @p val, since val is @p 1 this has the additional effect of setting the
+ * radio value to @p 1. For this radio we choose the default home icon:
+ * @until show
+ *
+ * To check that our radio buttons are working we'll add a callback to the
+ * "changed" signal of the radio:
+ * @until smart_callback
+ *
+ * The creation of our second radio button is almost identical, the 2
+ * differences worth noting are, the value of this radio 2 and that we add this
+ * radio to the group of the first radio:
+ * @until smart_callback
+ *
+ * For our third callback we'll omit the icon and set the value to 3, we'll also
+ * add it to the group of the first radio:
+ * @until smart_callback
+ *
+ * Our fourth callback has a value of 4, no icon and most relevantly is not a
+ * member of the same group as the other radios:
+ * @until show
+ *
+ * We finally run the main loop:
+ * @until ELM_MAIN
+ *
+ * And the last detail in our example is the callback that prints @p val so that
+ * we can see that the radios are indeed changing its value:
+ * @until }
+ *
+ * The example will look like this:
+ *
+ * @image html screenshots/radio_example_01.png
+ * @image latex screenshots/radio_example_01.eps width=\textwidth
+ *
+ * @example radio_example_01.c
+ */
+
+/**
+ * @page tutorial_toggle Toggle example
+ * @dontinclude toggle_example_01.c
+ *
+ * In this example we'll create 2 toggle widgets. The first will have an icon
+ * and the state names will be the default "on"/"off", it will also change the
+ * value of a variable directly. The second won't have a icon, the state names
+ * will be "Enabled"/"Disabled", it will start "Enabled" and it won't set the
+ * value of a variable.
+ *
+ * We start with the usual includes and prototype for callback which will be
+ * implemented and detailed later on:
+ * @until _cb2
+ *
+ * We then declare a static global variable(the one whose value will be changed
+ * by the first toggle):
+ * @until static
+ *
+ * We now have to create our window and all that usual stuff:
+ * @until show(bx)
+ *
+ * The creation of a toggle is no more complicated than that of any other
+ * widget:
+ * @until add
+ *
+ * For our first toggle we don't set the states labels so they will stay the
+ * default, however we do set a label for the toggle, an icon and the variable
+ * whose value it should change:
+ * @until show
+ *
+ * We also set the callback that will be called when the toggles value changes:
+ * @until smart_callback
+ *
+ * For our second toggle it important to note that we set the states labels,
+ * don't set an icon or variable, but set the initial state to
+ * EINA_TRUE("Enabled"):
+ * @until show
+ *
+ * For the second toggle we will use a different callback:
+ * @until smart_callback
+ *
+ * We then ask the main loop to start:
+ * @until ELM_MAIN
+ *
+ * The callback for our first toggle will look the value of @p val and print it:
+ * @until }
+ *
+ * For our second callback we need to do a little bit more, since the second
+ * toggle doesn't change the value of a variable we have to ask it what its
+ * state is:
+ * @until }
+ *
+ * This example will look like this:
+ *
+ * @image html screenshots/toggle_example_01.png
+ * @image latex screenshots/toggle_example_01.eps width=\textwidth
+ *
+ * @example toggle_example_01.c
+ */
+
+/**
+ * @page tutorial_panel Panel example
+ * @dontinclude panel_example_01.c
+ *
+ * In this example will have 3 panels, one for each possible orientation. Two of
+ * our panels will start out hidden, the third will start out expanded. For each
+ * of the panels we will use a label as the content, it's however possible to
+ * have any widget(including containers) as the content of panels.
+ *
+ * We start by doing some setup, code you should be familiar with from other
+ * examples:
+ * @until show(bx)
+ *
+ * And move right to creating our first panel, for this panel we are going to
+ * choose the orientation as TOP and toggle it(tell it to hide itself):
+ * @until pack_end
+ *
+ * For the second panel we choose the RIGHT orientation and explicitly set the
+ * state as hidden:
+ * @until pack_end
+ *
+ * For our third and last panel we won't set the orientation(which means it will
+ * use the default: LEFT):
+ * @until pack_end
+ *
+ * All that is left is running the main loop:
+ * @until ELM_MAIN
+ *
+ * This example will look like this;
+ *
+ * @image html screenshots/panel_example_01.png
+ * @image latex screenshots/panel_example_01.eps width=\textwidth
+ * @note The buttons with arrow allow the user to hide/show the panels.
+ *
+ * @example panel_example_01.c
+ */
+
+/**
+ * @page gengrid_example Gengrid widget example
+ *
+ * This application is a thorough exercise on the gengrid widget's
+ * API. We place an Elementary gengrid widget on a window, with
+ * various knobs below its viewport, each one acting on it somehow.
+ *
+ * The code's relevant part begins at the grid's creation. After
+ * instantiating it, we set its items sizes, so that we don't end with
+ * items one finger size wide, only. We're setting them to fat, 150
+ * pixel wide ones, for this example. We give it some size hints, not
+ * to be discussed in this context and, than, we register a callback
+ * on one of its smart events -- the one coming each time an item gets
+ * doubly clicked. There, we just print the item handle's value.
+ * @dontinclude gengrid_example.c
+ * @skip grid = elm_gengrid_add
+ * @until evas_object_sho
+ * @dontinclude gengrid_example.c
+ * @skip item double click callback
+ * @until }
+ *
+ * Before we actually start to deal with the items API, let's show
+ * some things items will be using throughout all the code. The first
+ * of them is a struct to be used as item data, for all of them:
+ * @dontinclude gengrid_example.c
+ * @skip typedef struct
+ * @until Item;
+ *
+ * That path will be used to index an image, to be swallowed into one
+ * of the item's icon spots. The imagens themselves are distributed
+ * with Elementary:
+ * @dontinclude gengrid_example.c
+ * @skip static const char *imgs
+ * @until ;
+ *
+ * We also have an (unique) gengrid item class we'll be using for
+ * items in the example:
+ * @dontinclude gengrid_example.c
+ * @skip static Elm_Gengrid_Item_Class
+ * @until static Elm_Gengrid_Item_Class
+ * @dontinclude gengrid_example.c
+ * @skip item_style =
+ * @until _grid_del
+ *
+ * As you see, our items will follow the default theme on gengrid
+ * items. For the label fetching code, we return a string composed of
+ * the item's image path:
+ * @dontinclude gengrid_example.c
+ * @skip label fetching callback
+ * @until }
+ *
+ * For item icons, we'll be populating the item default theme's two
+ * icon spots, @c "elm.swallow.icon" and @c "elm.swallow.end". The
+ * former will receive one of the images in our list (in the form of
+ * a @ref bg_02_example_page "background"), while the latter will be
+ * a check widget. Note that we prevent the check to propagate click
+ * events, so that the user can toggle its state without messing with
+ * the respective item's selection in the grid:
+ * @dontinclude gengrid_example.c
+ * @skip icon fetching callback
+ * @until return NULL
+ * @until }
+ *
+ * As the default gengrid item's theme does not have parts
+ * implementing item states, we'll be just returning false for every
+ * item state:
+ * @dontinclude gengrid_example.c
+ * @skip state fetching callback
+ * @until }
+ *
+ * Finally, the deletion callback on gengrid items takes care of
+ * freeing the item's label string and its data struct:
+ * @dontinclude gengrid_example.c
+ * @skip deletion callback
+ * @until }
+ *
+ * Let's move to item insertion/deletion knobs, them. They are four
+ * buttons, above the grid's viewport, namely
+ * - "Append" (to append an item to the grid),
+ * - "Prepend" (to prepend an item to the grid),
+ * - "Insert before" (to insert an item before the selection, on the
+ * grid),
+ * - "Insert after" (to insert an item after the selection, on the
+ * grid),
+ * - "Clear" (to delete all items in the grid),
+ * - "Bring in 1st" (to make the 1st item visible, by scrolling),
+ * - "Show last" (to directly show the last item),
+ * .
+ * which are displaced and declared in that order. We're not dealing
+ * with the buttons' creation code (see @ref button_example_01
+ * "a button example", for more details on it), but with their @c
+ * "clicked" registered callbacks. For all of them, the grid's handle
+ * is passed as @c data. The ones creating new items use a common
+ * code, which just gives a new @c Example_Item struct, with @c path
+ * filled with a random image in our images list:
+ * @dontinclude gengrid_example.c
+ * @skip new item with random path
+ * @until }
+ *
+ * Moreover, that ones will set a common function to be issued on the
+ * selection of the items. There, we print the item handle's value,
+ * along with the callback function data. The latter will be @c NULL,
+ * always, because it's what we pass when adding all icons. By using
+ * elm_gengrid_item_data_get(), we can have the item data back and,
+ * with that, we're priting the item's path string. Finally, we
+ * exemplify elm_gengrid_item_pos_get(), printing the item's position
+ * in the grid:
+ * @dontinclude gengrid_example.c
+ * @skip item selection callback
+ * @until }
+ *
+ * The appending button will exercise elm_gengrid_item_append(), simply:
+ * @dontinclude gengrid_example.c
+ * @skip append an item
+ * @until }
+ *
+ * The prepending, naturally, is analogous, but exercising
+ * elm_gengrid_item_prepend(), on its turn. The "Insert before" one
+ * will expect an item to be selected in the grid, so that it will
+ * insert a new item just before it:
+ * @dontinclude gengrid_example.c
+ * @skip "insert before" callback
+ * @until }
+ *
+ * The "Insert after" is analogous, just using
+ * elm_gengrid_item_insert_after(), instead. The "Clear" button will,
+ * as expected, just issue elm_gengrid_clear():
+ * @dontinclude gengrid_example.c
+ * @skip delete items
+ * @until }
+ *
+ * The "Bring in 1st" button is there exercise two gengrid functions
+ * -- elm_gengrid_first_item_get() and elm_gengrid_item_bring_in().
+ * With the former, we get a handle to the first item and, with the
+ * latter, you'll see that the widget animatedly scrolls its view
+ * until we can see that item:
+ * @dontinclude gengrid_example.c
+ * @skip bring in 1st item
+ * @until }
+ *
+ * The "Show last", in its turn, will use elm_gengrid_last_item_get()
+ * and elm_gengrid_item_show(). The latter differs from
+ * elm_gengrid_item_bring_in() in that it immediately replaces the
+ * contents of the grid's viewport with the region containing the item
+ * in question:
+ * @dontinclude gengrid_example.c
+ * @skip show last item
+ * @until }
+ *
+ * To change the grid's cell (items) size, we've placed a spinner,
+ * which has the following @c "changed" smart callback:
+ * @dontinclude gengrid_example.c
+ * @skip change items' size
+ * @until }
+ *
+ * Experiment with it and see how the items are affected. The "Disable
+ * item" button will, as the name says, disable the currently selected
+ * item:
+ * @dontinclude gengrid_example.c
+ * @skip disable selected item
+ * @until }
+ * Note that we also make use of elm_gengrid_item_selected_set(),
+ * there, thus making the item unselected before we actually disable
+ * it.
+ *
+ * To toggle between horizontal and vertical layouting modes on the
+ * grid, use the "Horizontal mode" check, which will call the
+ * respective API function on the grid:
+ * @dontinclude gengrid_example.c
+ * @skip change layouting mode
+ * @until }
+ *
+ * If you toggle the check right after that one, "Always select",
+ * you'll notice all subsequent clicks on the @b same grid item will
+ * still issue the selection callback on it, what is different from
+ * when it's not checked. This is the
+ * elm_gengrid_always_select_mode_set() behavior:
+ * @dontinclude gengrid_example.c
+ * @skip "always select" callback
+ * @until }
+ *
+ * One more check follows, "Bouncing", which will turn on/off the
+ * bouncing animations on the grid, when one scrolls past its
+ * borders. Experiment with scrolling the grid to get the idea, having
+ * it turned on and off:
+ * @dontinclude gengrid_example.c
+ * @skip "bouncing mode" callback
+ * @until }
+ *
+ * The next two checks will affect items selection on the grid. The
+ * first, "Multi-selection", will make it possible to select more the
+ * one item on the grid. Because it wouldn't make sense to fetch for
+ * an unique selected item on this case, we also disable two of the
+ * buttons, which insert items relatively, if multi-selection is on:
+ * @dontinclude gengrid_example.c
+ * @skip multi-selection callback
+ * @until }
+ *
+ * Note that we also @b unselect all items in the grid, when returning
+ * from multi-selection mode, making use of
+ * elm_gengrid_item_selected_set().
+ *
+ * The second check acting on selection, "No selection", is just what
+ * its name depicts -- no selection will be allowed anymore, on the
+ * grid, while it's on. Check it out for yourself, interacting with
+ * the program:
+ * @dontinclude gengrid_example.c
+ * @skip no selection callback
+ * @until }
+ *
+ * We have, finally, one more line of knobs, now sliders, to change
+ * the grids behavior. The two first will change the horizontal @b
+ * alignment of the whole actual grid of items within the gengrid's
+ * viewport:
+ * @dontinclude gengrid_example.c
+ * @skip items grid horizontal alignment change
+ * @until }
+ *
+ * Naturally, the vertical counterpart just issues
+ * elm_gengrid_align_set() changing the second alignment component,
+ * instead.
+ *
+ * The last slider will change the grid's <b>page size</b>, relative
+ * to its own one. Try to change those values and, one manner of
+ * observing the paging behavior, is to scroll softly and release the
+ * mouse button, with different page sizes, at different grid
+ * positions, while having lots of items in it -- you'll see it
+ * snapping to page boundaries differenty, for each configuration:
+ * @dontinclude gengrid_example.c
+ * @skip page relative size change
+ * @until }
+ *
+ * This is how the example program's window looks like:
+ * @image html screenshots/gengrid_example.png
+ * @image latex screenshots/gengrid_example.eps width=\textwidth
+ *
+ * Note that it starts with three items which we included at will:
+ * @dontinclude gengrid_example.c
+ * @skip _clicked(grid,
+ * @until _clicked(grid,
+ * @until _clicked(grid,
+ * @until _clicked(grid,
+ *
+ * See the full @ref gengrid_example_c "source code" for
+ * this example.
+ *
+ * @example gengrid_example.c
+ */
+/**
+ * @page entry_example_01 Entry - Example of simple editing
+ *
+ * As a general overview of @ref Entry we are going to write an, albeit simple,
+ * functional editor. Although intended to show how elm_entry works, this
+ * example also makes extensive use of several other widgets. The full code
+ * can be found in @ref entry_example.c "entry_example.c" and in the following
+ * lines we'll go through the parts especific to the @ref Entry widget.
+ *
+ * The program itself is a simple editor, with a file already set to it, that
+ * can be set to autosave or not and allows insertion of emoticons and some
+ * formatted text. As of this writing, the capabilities of format edition in
+ * the entry are very limited, so a lot of manual work is required to change
+ * the current text.
+ *
+ * In any case, the program allows some changes by using the buttons on the
+ * top of the window and returning focus back to the main entry afterwards.
+ *
+ * @image html screenshots/entry_example.png
+ * @image latex screenshots/entry_example.eps width=\textwidth
+ *
+ * We'll begin by showing a few structures used throught the program. First,
+ * the application owns data that holds the main window and the main entry
+ * where the editting happens. Then, an auxiliar structure we'll use later
+ * when inserting icons in our text.
+ * @dontinclude entry_example.c
+ * @skip typedef
+ * @until App_Inwin_Data
+ *
+ * A little convenience function will insert whatever text we need in the
+ * buffer at the current cursor's position and set focus back to this entry.
+ * This is done mostly because clicking on any button will make them steal
+ * focus, which makes writing text more cumbersome.
+ * @skip static void
+ * @until }
+ *
+ * One of the buttons on the top will trigger an @ref Inwin to open and show
+ * us several icons we can insert into the text. We'll jump over most of these
+ * functions, but when all the options are chosen, we insert the special
+ * markup text that will show the chosen icon in place.
+ * @skip edje_file_collection_list_free(emos)
+ * @skip static void
+ * @until evas_object_del
+ * @until }
+ *
+ * As can be seen in that function, the program lets us add icons to our entry
+ * using all the possible configurations for them. That should help to
+ * clarify how the different combinations work out by actually seeing them
+ * in action.
+ *
+ * The same popup window has a page to set the settings of the chosen icon,
+ * that is, the size and how the item will be placed within the line.
+ *
+ * The size is done with two entries, limitted to accept numbers and a fixed
+ * size of characters. Changing the value in this entries will update the icon
+ * size in our struct as seen in the next two callbacks.
+ * @skip static void
+ * @until }
+ * @until }
+ *
+ * The rest of the options are handled with radio buttons, since only one type
+ * of size can be used (@c size, @c absize or @c relsize) and for the vertical
+ * sizing it needs to choose between @c ascent and @c full. Depending on which
+ * is chosen, the @c item tag is formed accordingly as seen before.
+ * @skip static Evas_Object
+ * @until evas_object_show(rvascent)
+ *
+ * The first of our entries is here. There's something worth mentioning about
+ * the way we'll create this one. Normally, any entry regardless of whether is
+ * single line or not, will be set to scrollable, but in this case, since we
+ * are limitting how many characters can fit in them and we know we don't need
+ * scrolling, we are not setting this flag. This makes the entry have virtually
+ * no appearance on screen, other than its text. This is because an entry is
+ * just that, a box that holds text, and in order to have some frame around it
+ * or a background color, another widget needs to provide this. When an entry
+ * is scrollable, the same scroller used internally does this.
+ * We are using @ref Frame "frames" here to provide some decoration around,
+ * then creating our entries, set them to single line, add our two filters and
+ * the callback for when their value change.
+ * @until _height_changed_cb
+ *
+ * This function ends with the button that will finally call the item
+ * into our editting string.
+ * @until }
+ *
+ * Then we get to the format edition. Here we can add the @c bold and
+ * @c emphasis tags to parts of our text. There's a lot of manual work to
+ * know what to do here, since we are not implementing an entire state manager
+ * and the entry itself doesn't, yet, support all the needed capabilities to
+ * make this simpler. We begin by getting the format we are using in our
+ * function from the button pressed.
+ * @skip aid->pager = pager;
+ * @until sizeof(fmt_close)
+ *
+ * Next we need to find out if we need to insert an opening or a closing tag.
+ * For this, we store the current cursor position and create a selection
+ * from this point until the beginning of our text, and then get the selected
+ * text to look for any existing format tags in it. This is currently the only
+ * way in which we can find out what formats is being used in the entry.
+ * @until }
+ * @until }
+ *
+ * Once we know what tag to insert, we need a second check in the case it was
+ * a closing tag. This is because any other closing tag that comes after would
+ * be left dangling alone, so we need to remove it to keep the text consistent.
+ * @until }
+ * @until }
+ * Finally, we clear our fake selections and return the cursor back to the
+ * position it had at first, since there is where we want to insert our format.
+ * @until cursor_pos_set
+ *
+ * And finish by calling our convenience function from before, to insert the
+ * text at the current cursor and give focus back to the entry.
+ * @until }
+ *
+ * A checkbox on the top of our program tells us if the text we are editing
+ * will autosave or not. In it's @c "changed" callback we get the value from
+ * the checkbox and call the elm_entry_autosave_set() function with it. If
+ * autosave is set, we also call elm_entry_file_save(). This is so the internal
+ * timer used to periodically store to disk our changes is started.
+ * @skip static void
+ * @until }
+ *
+ * Two more functions to show some cursor playing. Whenever we double click
+ * anywhere on our entry, we'll find what word is the cursor placed at and
+ * select it. Likewise, for triple clicking, we select the entire line.
+ * @skip static void
+ * @until _edit_tplclick_cb
+ * @until }
+ *
+ * And finally, the main window of the program contains the entry where we
+ * do all the edition and some helping widgets to change format, add icons
+ * or change the autosave flag.
+ * @skip elm_exit
+ * @skip int
+ * @until _image_insert_cb
+ *
+ * And the main entry of the program. Set to scroll, by default we disable
+ * autosave and we'll begin with a file set to it because no file selector
+ * is being used here. The file is loaded with #ELM_TEXT_FORMAT_MARKUP_UTF8
+ * so that any format contained in it is interpreted, otherwise the entry
+ * would load it as just text, escaping any tags found and no format or icons
+ * would be shown. Then we connect to the double and triple click signals
+ * and set focus on the entry so we can start typing right away.
+ * @until ELM_MAIN
+ *
+ * @example entry_example.c
+ */
+
+/**
+ * @page genlist_example_01 Genlist - basic usage
+ *
+ * This example creates a simple genlist with a small number of items and
+ * a callback that is called whenever an item is selected. All the properties of
+ * this genlist are the default ones. The full code for this example can be seen
+ * at @ref genlist_example_01_c.
+ *
+ * For the simplest list that you plan to create, it's necessary to define some
+ * of the basic functions that are used for creating each list item, and
+ * associating them with the "item class" for that list. The item class is just
+ * an struct that contains pointers to the specific list item functions that are
+ * common to all the items of the list.
+ *
+ * Let's show it by example. Our item class is declared globally and static as
+ * it will be the only item class that we need (we are just creating one list):
+ *
+ * @dontinclude genlist_example_01.c
+ * @skip static Elm_Genlist
+ * @until static Elm_Genlist
+ *
+ * This item class will be used for every item that we create. The only
+ * functions that we are going to set are @c label_get and @c icon_get. As the
+ * name suggests, they are used by the genlist to generate the label for the
+ * respective item, and to generate icon(s) to it too. Both the label and icon
+ * get functions can be called more than once for each item, with different @c
+ * part parameters, which represent where in the theme of the item that label or
+ * icon is going to be set.
+ *
+ * The default theme for the genlist contains only one area for label, and two
+ * areas for icon ("elm.swallow.icon" and "elm.swallow.end"). Since we just want
+ * to set the first icon (that will be at the left side of the label), we
+ * compare the part name given with "elm.swallow.icon". Notice that the
+ * @c label_get function must return a strduped string, that will be freed later
+ * automatically by the list. Here's the code for @c label_get and @c icon_get:
+ *
+ * @until static void
+ *
+ * We will also provide a function that will be called whenever an item is
+ * selected in the genlist. However, this function is not part of the item
+ * class, it will be passed for each item being added to the genlist explicitly.
+ * Notice the similarity of the function signature with those used by @c
+ * evas_object_smart_callback_add:
+ *
+ * @until }
+ *
+ * Now let's show the code used for really creating the list. Skipping
+ * boilerplate code used for creating a window and background, the first piece
+ * of code specific to our genlist example is setting the pointer functions of
+ * the item class to our above defined functions:
+ *
+ * @skip _itc
+ * @until func.del
+ *
+ * Notice that we also choose to use the "default" style for our genlist items.
+ * Another interesting point is that @c state_get and @c del are set to @c NULL,
+ * since we don't need these functions now. @c del doesn't need to be used
+ * because we don't add any data that must be freed to our items, and @c
+ * state_get is also not used since all of our items are the same and don't need
+ * to have different states to be used for each item. Finally we create our
+ * list:
+ *
+ * @until genlist_add
+ *
+ * Now we append several items to the list, and for all of them we need to give
+ * the list pointer, a pointer to the item class, the data that will be used
+ * with that item, a pointer to the parent of this item if it is in a group type
+ * list (this is not the case so we pass @c NULL), possible flags for this item,
+ * the callback for when the item is selected, and the data pointer that will be
+ * given to the selected callback.
+ *
+ * @until }
+ *
+ * The rest of the code is also common to all the other examples, so it will be
+ * omitted here (look at the full source code link above if you need it).
+ *
+ * You can try to play with this example, and see the selected callback being
+ * called whenever an item is clicked. It also already has some features enabled
+ * by default, like vertical bounce animation when reaching the end of the list,
+ * automatically visible/invisible scrollbar, etc. Look at the @ref
+ * genlist_example_02 to see an example of setting these properties to the list.
+ *
+ * The current example will look like this when running:
+ *
+ * @image html screenshots/genlist_example_01.png
+ * @image latex screenshots/genlist_example_01.eps width=\textwidth
+ */
+
+/**
+ * @page genlist_example_02 Genlist - list setup functions
+ *
+ * This example is very similar to the @ref genlist_example_01, but it fetch
+ * most of the properties of the genlist and displays them on startup (thus
+ * getting the default value for them) and then set them to some other values,
+ * to show how to use that API. The full source code is at @ref
+ * genlist_example_02_c.
+ *
+ * Considering that the base code for instantiating a genlist was already
+ * described in the previous example, we are going to focus on the new code.
+ *
+ * Just a small difference for the @c _item_label_get function, we are going to
+ * store the time that this function was called. This is the "realized" time,
+ * the time when the visual representation of this item was created. This is the
+ * code for the @c label_get function:
+ *
+ * @dontinclude genlist_example_02.c
+ * @skip static char
+ * @until return strdup
+ *
+ * Now let's go to the list creation and setup. First, just after creating the
+ * list, we get most of the default properties from it, and print them on the
+ * console:
+ *
+ * @skip genlist_add
+ * @until printf("\n")
+ *
+ * We are going to change some of the properties of our list.
+ *
+ * There's no need to call the selected callback at every click, just when the
+ * selected item changes, thus we call elm_genlist_always_select_mode_set() with
+ * false.
+ *
+ * For this list we don't want bounce animations at all, so we set both the
+ * horizontal bounce and the vertical bounce to false with
+ * elm_genlist_bounce_set().
+ *
+ * We also want our list to compress items if they are wider than the list
+ * width (thus we call elm_genlist_compress_mode_set().
+ *
+ * The items have different width, so they are not homogeneous:
+ * elm_genlist_homogeneous_set() is set to false.
+ *
+ * Since the compress mode is active, the call to
+ * elm_genlist_horizontal_mode_set() doesn't make difference, but the current
+ * option would make the list to have at least the width of the largest item.
+ *
+ * This list will support multiple selection, so we call
+ * elm_genlist_multi_select_set() on it.
+ *
+ * The option elm_genlist_height_for_width_mode_set() would allow text block to
+ * wrap lines if the Edje part is configured with "text.min: 0 1", for example.
+ * But since we are compressing the elements to the width of the list, this
+ * option wouldn't take any effect.
+ *
+ * We want the vertical scrollbar to be always displayed, and the orizontal one
+ * to never be displayed, and set this with elm_genlist_scroller_policy_set().
+ *
+ * The timeout to consider a longpress is set to half of a second with
+ * elm_genlist_longpress_timeout_set().
+ *
+ * We also change the block count to a smaller value, but that should have not
+ * impact on performance since the number of visible items is too small. We just
+ * increase the granularity of the block count (setting it to have at most 4
+ * items).
+ *
+ * @until block_count_set
+ *
+ * Now let's add elements to the list:
+ *
+ * @until item_append
+ * @until }
+ *
+ * It's exactly the same as the previous example. The difference is on the
+ * behavior of the list, if you try to scroll, select items and so.
+ *
+ * In this example we also need two buttons. One of them, when clicked, will
+ * display several status info about the current selection, the "realized"
+ * items, the item in the middle of the screen, and the current mode and active
+ * item of that mode for the genlist.
+ *
+ * The other button will ask the genlist to "realize" again the items already
+ * "realized", so their respective label_get and icon_get functions will be
+ * called again.
+ *
+ * These are the callbacks for both of these buttons:
+ *
+ * @dontinclude genlist_example_02.c
+ * @skip item_sel_cb
+ * @skip static
+ * @until }
+ * @until }
+ *
+ * Try to scroll, select some items and click on the "Show status" button.
+ * You'll notice that not all items of the list are "realized", thus consuming
+ * just a small amount of memory. The selected items are listed in the order
+ * that they were selected, and the current selected item printed using
+ * elm_genlist_selected_item_get() is the first selected item of the multiple
+ * selection.
+ *
+ * Now resize the window so that you can see the "realized time" of some items.
+ * This is the time of when the label_get function was called. If you click on
+ * the "Realize" button, all the already realized items will be rebuilt, so the
+ * time will be updated for all of them.
+ *
+ * The current example will look like this when running:
+ *
+ * @image html screenshots/genlist_example_02.png
+ * @image latex screenshots/genlist_example_02.eps width=\textwidth
+ */
+
+/**
+ * @page genlist_example_03 Genlist - different width options
+ *
+ * This example doesn't present any other feature that is not already present in
+ * the other examples, but visually shows the difference between using the
+ * default list options (first list of the example), setting the horizontal mode
+ * to #ELM_LIST_LIMIT (second list), enabling compress mode (third list) and
+ * using height_for_width option (fourth list).
+ *
+ * The full code for this example is listed below:
+ *
+ * @include genlist_example_03.c
+ *
+ * And the screenshot of the running example:
+ *
+ * @image html screenshots/genlist_example_03.png
+ * @image latex screenshots/genlist_example_03.eps width=\textwidth
+ *
+ * @example genlist_example_03.c
+ */
+
+/**
+ * @page genlist_example_04 Genlist - items manipulation
+ *
+ * This example is also similar ot the @ref genlist_example_01, but it
+ * demonstrates most of the item manipulation functions. See the full source
+ * code at @ref genlist_example_04_c.
+ *
+ * In this example, we also will use the concept of creating groups of items in
+ * the genlist. Each group of items is composed by a parent item (which will be
+ * the index of the group) and several children of this item. Thus, for the
+ * children, we declare a normal item class. But we also are going to declare a
+ * different item class for the group index (which in practice is another type
+ * of item in the genlist):
+ *
+ * @dontinclude genlist_example_04.c
+ * @skip _item_sel_cb
+ * @skip static
+ * @until }
+ * @until }
+ *
+ * We will add buttons to the window, where each button provides one
+ * functionality of the genlist item API. Each button will have a callback
+ * attached, that will really execute this functionality. An example of these
+ * callbacks is the next one, for the elm_genlist_item_insert_after() function:
+ *
+ * @skip insert_before_cb
+ * @skip static
+ * @until }
+ *
+ * If you want ot see the other button functions, look at the full source code
+ * link above.
+ *
+ * Each button will be created with a function that already creates the button,
+ * add it to an elementary box, and attach the specified callback. This is the
+ * function that does it:
+ *
+ * @skip genlist_item_update
+ * @skip static
+ * @until }
+ *
+ * In our @c elm_main function, besides the code for setting up the window, box
+ * and background, we also initialize our two item classes:
+ *
+ * @skip _itc.item_style
+ * @until _itc_group.func.del
+ *
+ * This example uses a different style for the items, the @a double_label, which
+ * provides a text field for the item text, and another text field for a subtext.
+ *
+ * For the group index we use the @a group_index style, which provides a
+ * different appearance, helping to identify the end of a group and beginning of
+ * another one.
+ *
+ * Now, after the code for creating the list, setting up the box and other
+ * stuff, let's add the buttons with their respective callbacks:
+ *
+ * @skip _button_add
+ * @until bt_top_show
+ *
+ * The main code for adding items to the list is a bit more complex than the one
+ * from the previous examples. We check if each item is multiple of 7, and if
+ * so, they are group indexes (thus each group has 6 elements by default, in
+ * this example):
+ *
+ * @skip for
+ * @until }
+ * @until }
+ *
+ * Then we also check for specific items, and add callbacks to them on the
+ * respective buttons, so we can show, bring in, etc.:
+ *
+ * @until }
+ * @until }
+ *
+ * Once you understand the code from the @ref genlist_example_01, it should be
+ * easy to understand this one too. Look at the full code, and also try to play
+ * a bit with the buttons, adding items, bringing them to the viewport, and so.
+ *
+ * The example will look like this when running:
+ *
+ * @image html screenshots/genlist_example_04.png
+ * @image latex screenshots/genlist_example_04.eps width=\textwidth
+ */
+
+/**
+ * @page genlist_example_05 Genlist - working with subitems
+ *
+ * This is probably the most complex example of elementary @ref Genlist. We
+ * create a tree of items, using the subitems properties of the items, and keep
+ * it in memory to be able to expand/hide subitems of an item. The full source
+ * code can be found at @ref genlist_example_05_c
+ *
+ * The main point is the way that Genlist manages subitems. Clicking on an
+ * item's button to expand it won't really show its children. It will only
+ * generate the "expand,request" signal, and the expansion must be done
+ * manually.
+ *
+ * In this example we want to be able to add items as subitems of another item.
+ * If an item has any child, it must be displayed using a parent class,
+ * otherwise it will use the normal item class.
+ *
+ * It will be possible to delete items too. Once a tree is constructed (with
+ * subitems of subitems), and the user clicks on the first parent (root of the
+ * tree), the entire subtree must be hidden. However, just calling
+ * elm_genlist_item_expanded_set(item, EINA_FALSE) won't hide them. The only
+ * thing that happens is that the parent item will change its appearance to
+ * represent that it's contracted. And the signal "contracted" will be emitted
+ * from the genlist. Thus, we must call elm_genlist_item_subitems_clear() to
+ * delete all its subitems, but still keep a way to recreate them when expanding
+ * the parent again. That's why we are going to keep a node struct for each
+ * item, that will be the data of the item, with the following information:
+ *
+ * @dontinclude genlist_example_05.c
+ * @skip typedef
+ * @until }
+ *
+ * This @c Node_Data contains the value for the item, a number indicating its
+ * level under the tree, a list of children (to be able to expand it later) and
+ * a boolean indicating if it's a favorite item or not.
+ *
+ * We use 3 different item classes in this example:
+ *
+ * One for items that don't have children:
+ *
+ * @skip nitems
+ * @skip static
+ * @until }
+ * @until }
+ *
+ * One for items that have children:
+ *
+ * @skip item_sel
+ * @skip static
+ * @until }
+ * @until }
+ *
+ * And one for items that were favorited:
+ *
+ * @skip static
+ * @until }
+ * @until }
+ *
+ * The favorite item class is there just to demonstrate the
+ * elm_genlist_item_item_class_update() function in action. It would be much
+ * simpler to implement the favorite behavior by just changing the icon inside
+ * the icon_get functions when the @c favorite boolean is activated.
+ *
+ * Now we are going to declare the callbacks for the buttons that add, delete
+ * and change items.
+ *
+ * First, a button for appending items to the list:
+ *
+ * @until item_append
+ * @until }
+ *
+ * If an item is selected, a new item will be appended to the same level of that
+ * item, but using the selected item's parent as its parent too. If no item is
+ * selected, the new item will be appended to the root of the tree.
+ *
+ * Then the callback for marking an item as favorite:
+ *
+ * @until elm_genlist_item_update
+ * @until }
+ *
+ * This callback is very simple, it just changes the item class of the selected
+ * item for the "favorite" one, or go back to the "item" or "parent" class
+ * depending on that item having children or not.
+ *
+ * Now, the most complex operation (adding a child to an item):
+ *
+ * @until elm_genlist_item_update
+ * @until }
+ *
+ * This function gets the data of the selected item, create a new data (for the
+ * item being added), and appends it to the children list of the selected item.
+ *
+ * Then we must check if the selected item (let's call it @c item1 now) to which
+ * the new item (called @c item2 from now on) was already a parent item too
+ * (using the parent item class) or just a normal item (using the default item
+ * class). In the first case, we just have to append the item to the end of the
+ * @c item1 children list.
+ *
+ * However, if the @c item1 didn't have any child previously, we have to change
+ * it to a parent item now. It would be easy to just change its item class to
+ * the parent type, but there's no way to change the item flags and make it be
+ * of the type #ELM_GENLIST_ITEM_SUBITEMS. Thus, we have to delete it and create
+ * a new item, and add this new item to the same position that the deleted one
+ * was. That's the reason of the checks inside the bigger @c if.
+ *
+ * After adding the item to the newly converted parent, we set it to not
+ * expanded (since we don't want to show the added item immediately) and select
+ * it again, since the original item was deleted and no item is selected at the
+ * moment.
+ *
+ * Finally, let's show the callback for deleting items:
+ *
+ * @until elm_genlist_item_update
+ * @until }
+ *
+ * Since we have an iternal list representing each element of our tree, once we
+ * delete an item we have to go deleting each child of that item, in our
+ * internal list. That's why we have the function @c _clear_list, which
+ * recursively goes freeing all the item data.
+ *
+ * This is necessary because only when we really want to delete the item is when
+ * we need to delete the item data. When we are just contracting the item, we
+ * need to hide the children by deleting them, but keeping the item data.
+ *
+ * Now there are two callbacks that will be called whenever the user clicks on
+ * the expand/contract icon of the item. They will just request to items to be
+ * contracted or expanded:
+ *
+ * @until elm_genlist_item_expanded_set(
+ * @until elm_genlist_item_expanded_set(
+ * @until }
+ *
+ * When the elm_genlist_item_expanded_set() function is called with @c
+ * EINA_TRUE, the @c _expanded_cb will be called. And when this happens, the
+ * subtree of that item must be recreated again. This is done using the internal
+ * list stored as item data for each item. The function code follows:
+ *
+ * @until }
+ *
+ * Each appended item is set to contracted, so we don't have to deal with
+ * checking if the item was contracted or expanded before its parent being
+ * contracted. It could be easily implemented, though, by adding a flag expanded
+ * inside the item data.
+ *
+ * Now, the @c _contracted_cb, which is much simpler:
+ *
+ * @until }
+ *
+ * We just have to call elm_genlist_item_subitems_clear(), that will take care
+ * of deleting every item, and keep the item data still stored (since we don't
+ * have any del function set on any of our item classes).
+ *
+ * Finally, the code inside @c elm_main is very similar to the other examples:
+ *
+ * @skip elm_main
+ * @until ELM_MAIN
+ *
+ * The example will look like this when running:
+ *
+ * @image html screenshots/genlist_example_05.png
+ * @image latex screenshots/genlist_example_05.eps width=\textwidth
+ */
+
+/**
+ * @page thumb_example_01 Thumb - generating thumbnails.
+ *
+ * This example shows how to create a simple thumbnail object with Elementary.
+ * The full source code can be found at @ref thumb_example_01_c
+ *
+ * Everything is very simple. First we need to tell elementary that we need
+ * Ethumb to generate the thumbnails:
+ *
+ * @dontinclude thumb_example_01.c
+ * @skipline elm_need_ethumb
+ *
+ * Then, after creating the window and background, we setup our client to
+ * generate images of 160x160:
+ *
+ * @skip client_get
+ * @until size_set
+ *
+ * After that, we can start creating thumbnail objects. They are very similar to
+ * image or icon objects:
+ *
+ * @until thumb_reload
+ *
+ * As you can see, the main different function here is elm_thumb_reload(), which
+ * will check if the options of the Ethumb client have changed. If so, it will
+ * re-generate the thumbnail, and show the new one.
+ *
+ * Notice in this example that the thumbnail object is displayed on the size of
+ * the window (320x320 pixels), but the thumbnail generated and stored has size
+ * 160x160 pixels. That's why the picture seems upscaled.
+ *
+ * Ideally, you will be generating thumbnails with the size that you will be
+ * using them.
+ *
+ * The example will look like this when running:
+ *
+ * @image html screenshots/thumb_example_01.png
+ * @image latex screenshots/thumb_example_01.eps width=\textwidth
+ */
+
+/**
+ * @page progressbar_example Progress bar widget example
+ *
+ * This application is a thorough example of the progress bar widget,
+ * consisting of a window with varios progress bars, each with a given
+ * look/style one can give to those widgets. With two auxiliary
+ * buttons, one can start or stop a timer which will fill in the bars
+ * in synchrony, simulating an underlying task being completed.
+ *
+ * We create @b seven progress bars, being three of them horizontal,
+ * three vertical and a final one under the "wheel" alternate style.
+ *
+ * For the first one, we add a progress bar on total pristine state,
+ * with no other call than the elm_progressbar_add() one:
+ * @dontinclude progressbar_example.c
+ * @skip pb with no label
+ * @until pb1
+ * See, than, that the defaults of a progress bar are:
+ * - no primary label shown,
+ * - unit label set to @c "%.0f %%",
+ * - no icon set
+ *
+ * The second progress bar is given a primary label, <c>"Infinite
+ * bounce"</c>, and, besides, it's set to @b pulse. See how, after one
+ * starts the progress timer, with the "Start" button, it animates
+ * differently than the previous one. It won't account for the
+ * progress, itself, and just dumbly animate a small bar within its
+ * bar region.
+ * @dontinclude progressbar_example.c
+ * @skip pb with label
+ * @until pb2
+ *
+ * Next, comes a progress bar with an @b icon, a primary label and a
+ * @b custom unit label set. It's also made to grow its bar in an
+ * @b inverted manner, so check that out during the timer's progression:
+ * @dontinclude progressbar_example.c
+ * @skip ic1 =
+ * @until pb3
+ * Another important thing in this one is the call to
+ * elm_progressbar_span_size_set() -- this is how we forcefully set a
+ * minimum horizontal size to our whole window! We're not resizing it
+ * manually, as you can see in the @ref progressbar_example_c
+ * "complete code".
+ *
+ * The next three progress bars are just variants on the ones already
+ * shown, but now all being @b vertical. Another time we use one of
+ * than to give the window a minimum vertical size, with
+ * elm_progressbar_span_size_set(). To demonstrate this trick once
+ * more, the fifth one, which is also set to pulse, has a smaller
+ * hardcoded span size:
+ * @dontinclude progressbar_example.c
+ * @skip vertical pb, with pulse
+ * @until pb5
+ *
+ * We end the widget demonstration by showing a progress bar with the
+ * special @b "wheel" progress bar style. One does @b not need to set
+ * it to pulse, with elm_progressbar_pulse_set(), explicitly, because
+ * its theme does not take it in account:
+ * @dontinclude progressbar_example.c
+ * @skip "wheel"
+ * @until pb7
+ *
+ * The two buttons exercising the bars, the facto, follow:
+ * @dontinclude progressbar_example.c
+ * @skip elm_button_add
+ * @until evas_object_show(bt)
+ * @until evas_object_show(bt)
+ *
+ * The first of the callbacks will, for the progress bars set to
+ * pulse, start the pulsing animation at that time. For the others, a
+ * timer callback will take care of updating the values:
+ * @dontinclude progressbar_example.c
+ * @skip static Eina_Bool
+ * @until }
+ * @until }
+ * @until }
+ *
+ * Finally, the callback to stop the progress timer will stop the
+ * pulsing on the pulsing progress bars and, for the others, to delete
+ * the timer which was acting on their values:
+ * @dontinclude progressbar_example.c
+ * @skip end of show
+ * @until }
+ * @until }
+ *
+ * This is how the example program's window looks like:
+ * @image html screenshots/progressbar_example.png
+ * @image latex screenshots/progressbar_example.eps width=\textwidth
+ *
+ * See the full @ref progressbar_example_c "source code" for
+ * this example.
+ *
+ * @example progressbar_example.c
+ */
+
+/**
+ * @page tutorial_notify Notify example
+ * @dontinclude notify_example_01.c
+ *
+ * In this example we will have 3 notifys in 3 different positions. The first of
+ * which will dissapear after 5 seconds or when a click outside it occurs, the
+ * second and third will not dissapear and differ from each other only in
+ * position.
+ *
+ * We start our example with the usual stuff you've seen in other examples:
+ * @until show(bx)
+ *
+ * We now create a label to use as the content of our first notify:
+ * @until show
+ *
+ * Having the label we move to creating our notify, telling it to block events,
+ * setting its timeout(to autohide it):
+ * @until pack_end
+ *
+ * To have the notify dissapear when a click outside its area occur we have to
+ * listen to its "block,clicked" signal:
+ * @until smart_callback
+ *
+ * Our callback will look like this:
+ * @skip static
+ * @until }
+ * @dontinclude notify_example_01.c
+ *
+ * Next we create another label and another notify. Note, however, that this
+ * time we don't set a timeout and don't have it block events. What we do is set
+ * the orient so that this notify will appear in the bottom of its parent:
+ * @skip smart_callback
+ * @skip content
+ * @until pack_end
+ *
+ * For our third notify the only change is the orient which is now center:
+ * @until pack_end
+ *
+ * Now we tell the main loop to run:
+ * @until ELM_MAIN
+ *
+ * Our example will initially look like this:
+ *
+ * @image html screenshots/notify_example_01.png
+ * @image latex screenshots/notify_example_01.eps width=\textwidth
+ *
+ * Once the first notify is hidden:
+ *
+ * @image html screenshots/notify_example_01_a.png
+ * @image latex screenshots/notify_example_01_a.eps width=\textwidth
+ *
+ * @example notify_example_01.c
+ */
+
+/**
+ * @page tutorial_frame Frame example
+ * @dontinclude frame_example_01.c
+ *
+ * In this example we are going to create 4 Frames with different styles and
+ * add a rectangle of different color in each.
+ *
+ * We start we the usual setup code:
+ * @until show(bg)
+ *
+ * And then create one rectangle:
+ * @until show
+ *
+ * To add it in our first frame, which since it doesn't have it's style
+ * specifically set uses the default style:
+ * @until show
+ *
+ * And then create another rectangle:
+ * @until show
+ *
+ * To add it in our second frame, which uses the "pad_small" style, note that
+ * even tough we are setting a text for this frame it won't be show, only the
+ * default style shows the Frame's title:
+ * @until show
+ * @note The "pad_small", "pad_medium", "pad_large" and "pad_huge" styles are
+ * very similar, their only difference is the size of the empty area around
+ * the content of the frame.
+ *
+ * And then create yet another rectangle:
+ * @until show
+ *
+ * To add it in our third frame, which uses the "outdent_top" style, note
+ * that even tough we are setting a text for this frame it won't be show,
+ * only the default style shows the Frame's title:
+ * @until show
+ *
+ * And then create one last rectangle:
+ * @until show
+ *
+ * To add it in our fourth and final frame, which uses the "outdent_bottom"
+ * style, note that even tough we are setting a text for this frame it won't
+ * be show, only the default style shows the Frame's title:
+ * @until show
+ *
+ * And now we are left with just some more setup code:
+ * @until ELM_MAIN()
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/frame_example_01.png
+ * @image latex screenshots/frame_example_01.eps width=\textwidth
+ *
+ * @example frame_example_01.c
+ */
+
+/**
+ * @page tutorial_anchorblock_example Anchorblock/Anchorview example
+ * This example will show both Anchorblock and @ref Anchorview,
+ * since both are very similar and it's easier to show them once and side
+ * by side, so the difference is more clear.
+ *
+ * We'll show the relevant snippets of the code here, but the full example
+ * can be found here... sorry, @ref anchorblock_example_01.c "here".
+ *
+ * As for the actual example, it's just a simple window with an anchorblock
+ * and an anchorview, both containing the same text. After including
+ * Elementary.h and declaring some functions we'll need, we jump to our
+ * elm_main (see ELM_MAIN) and create our window.
+ * @dontinclude anchorblock_example_01.c
+ * @skip int
+ * @until const char
+ * @until ;
+ *
+ * With the needed variables declared, we'll create the window and a box to
+ * hold our widgets, but we don't need to go through that here.
+ *
+ * In order to make clear where the anchorblock ends and the anchorview
+ * begins, they'll be each inside a @ref Frame. After creating the frame,
+ * the anchorblock follows.
+ * @skip elm_frame_add
+ * @until elm_frame_content_set
+ *
+ * Nothing out of the ordinary there. What's worth mentioning is the call
+ * to elm_anchorblock_hover_parent_set(). We are telling our widget that
+ * when an anchor is clicked, the hover for the popup will cover the entire
+ * window. This affects the area that will be obscured by the hover and
+ * where clicking will dismiss it, as well as the calculations it does to
+ * inform the best locations where to insert the popups content.
+ * Other than that, the code is pretty standard. We also need to set our
+ * callback for when an anchor is clicked, since it's our task to populate
+ * the popup. There's no default for it.
+ *
+ * The anchorview is no different, we only change a few things so it looks
+ * different.
+ * @until elm_frame_content_set
+ *
+ * Then we run, so stuff works and close our main function in the usual way.
+ * @until ELM_MAIN
*
- * So far so good? Great 'cause that's all there is too it, what is left now is
- * just connecting our buttons to the callbacks we defined at the beginning of
- * the example and run the main loop:
+ * Now, a little note. Normally you would use either one of anchorblock or
+ * anchorview, set your one callback to clicks and do your stuff in there.
+ * In this example, however, there are a few tricks to make it easier to
+ * show both widgets in one go (and to save me some typing). So we have
+ * two callbacks, one per widget, that will call a common function to do
+ * the rest. The trick is using ::Elm_Entry_Anchorblock_Info for the
+ * anchorview too, since both are equal, and passing a callback to use
+ * for our buttons to end the hover, because each widget has a different
+ * function for it.
+ * @until _anchorview_clicked_cb
+ * @until }
+ *
+ * The meat of our popup is in the following function. We check what kind
+ * of menu we need to show, based on the name set to the anchor in the
+ * markup text. If there's no type (something went wrong, no valid contact
+ * in the address list) we are just putting a button that does nothing, but
+ * it's perfectly reasonable to just end the hover and call it quits.
+ *
+ * Our popup will consist of one main button in the middle of our hover,
+ * and possibly a secondary button and a list of other options. We'll create
+ * first our main button and check what kind of popup we need afterwards.
+ * @skip static void
+ * @skip static void
+ * @until eina_stringshare_add
+ * @until }
+ *
+ * Each button has two callbacks, one is our hack to close the hover
+ * properly based on which widget it belongs to, the other a simple
+ * printf that will show the action with the anchors own data. This is
+ * not how you would usually do it. Instead, the common case is to have
+ * one callback for the button that will know which function to call to end
+ * things, but since we are doing it this way it's worth noting that
+ * smart callbacks will be called in reverse in respect to the order they
+ * were added, and since our @c btn_end_cb will close the hover, and thus
+ * delete our buttons, the other callback wouldn't be called if we had
+ * added it before.
+ *
+ * After our telephone popup, there are a few others that are practically
+ * the same, so they won't be shown here.
+ *
+ * Once we are done with that, it's time to place our actions into our
+ * hover. Main button goes in the middle without much questioning, and then
+ * we see if we have a secondary button and a box of extra options.
+ * Because I said so, secondary button goes on either side and box of
+ * options either on top or below the main one, but to choose which
+ * exactly, we use the hints our callback info has, which saves us from
+ * having to do the math and see which side has more space available, with
+ * a little special case where we delete our extra stuff if there's nowhere
+ * to place it.
+ * @skip url:
+ * @skip }
+ * @skip evas_object_smart
+ * @until evas_object_del(box)
+ * @until }
+ * @until }
+ *
+ * The example will look like this:
+ *
+ * @image html screenshots/anchorblock_01.png
+ * @image latex screenshots/anchorblock_01.eps width=\textwidth
+ *
+ * @example anchorblock_example_01.c
+ */
+
+/**
+ * @page tutorial_check Check example
+ * @dontinclude check_example_01.c
+ *
+ * This example will show 2 checkboxes, one with just a label and the second
+ * one with both a label and an icon. This example also ilustrates how to
+ * have the checkbox change the value of a variable and how to react to those
+ * changes.
+ *
+ * We will start with the usual setup code:
+ * @until show(bg)
+ *
+ * And now we create our first checkbox, set its label, tell it to change
+ * the value of @p value when the checkbox stats is changed and ask to be
+ * notified of state changes:
+ * @until show
+ *
+ * For our second checkbox we are going to set an icon so we need to create
+ * and icon:
+ * @until show
+ * @note For simplicity we are using a rectangle as icon, but any evas object
+ * can be used.
+ *
+ * And for our second checkbox we set the label, icon and state to true:
+ * @until show
+ *
+ * We now do some more setup:
* @until ELM_MAIN
*
- * Our example will initially look like this:
- * @image html screenshots/hover_example_01.png
- * @image latex screenshots/hover_example_01.eps
+ * And finally implement the callback that will be called when the first
+ * checkbox's state changes. This callback will use @p data to print a
+ * message:
+ * @until }
+ * @note This work because @p data is @p value(from the main function) and @p
+ * value is changed when the checkbox is changed.
*
- * And after you click the "Show hover" button it will look like this:
- * @image html screenshots/hover_example_01_a.png
- * @image latex screenshots/hover_example_01_a.eps
+ * Our example will look like this:
*
- * @example hover_example_01.c
+ * @image html screenshots/check_example_01.png
+ * @image latex screenshots/check_example_01.eps width=\textwidth
+ *
+ * @example check_example_01.c
*/
/**
- * @page tutorial_flip Flip example
- * @dontinclude flip_example_01.c
- *
- * This example will show a flip with two rectangles on it(one blue, one
- * green). Our example will allow the user to choose the animation the flip
- * uses and to interact with it. To allow the user to choose the interaction
- * mode we use radio buttons, we will however not explain them, if you would
- * like to know more about radio buttons see @ref radio.
- *
- * We start our example with the usual setup and then create the 2 rectangles
- * we will use in our flip:
- * @until show(rect2)
- *
- * The next thing to do is to create our flip and set it's front and back
- * content:
- * @until show
- *
- * The next thing we do is set the interaction mode(which the user can later
- * change) to the page animation:
- * @until PAGE
- *
- * Setting a interaction mode however is not sufficient, we also need to
- * choose which directions we allow interaction from, for this example we
- * will use all of them:
- * @until RIGHT
- *
- * We are also going to set the hitsize to the entire flip(in all directions)
- * to make our flip very easy to interact with:
- * @until RIGHT
- *
- * After that we create our radio buttons and start the main loop:
- * @until ELM_MAIN()
- *
- * When the user clicks a radio button a function that changes the
- * interaction mode and animates the flip is called:
- * @until }
- * @note The elm_flip_go() call here serves no purpose other than to
- * ilustrate that it's possible to animate the flip programmatically.
- *
- * Our example will look like this:
- * @image html screenshots/flip_example_01.png
- * @image latex screenshots/flip_example_01.eps
- * @note Since this is an animated example the screenshot doesn't do it
- * justice, it is a good idea to compile it and see the animations.
- *
- * @example flip_example_01.c
- */
+ * @page tutorial_colorselector Color selector example
+ * @dontinclude colorselector_example_01.c
+ *
+ * This example shows how to change the color of a rectangle using a color
+ * selector. We aren't going to explain a lot of the code since it's the
+ * usual setup code:
+ * @until show(rect)
+ *
+ * Now that we have a window with background and a rectangle we can create
+ * our color_selector and set it's initial color to fully opaque blue:
+ * @until show
+ *
+ * Next we tell ask to be notified whenever the color changes:
+ * @until changed
+ *
+ * We follow that we some more run of the mill setup code:
+ * @until ELM_MAIN()
+ *
+ * And now get to the callback that sets the color of the rectangle:
+ * @until }
+ *
+ * This example will look like this:
+ *
+ * @image html screenshots/colorselector_example_01.png
+ * @image latex screenshots/colorselector_example_01.eps width=\textwidth
+ *
+ * @example colorselector_example_01.c
+ */
- /**
- * @page tutorial_label Label example
- * @dontinclude label_example_01.c
- *
- * In this example we are going to create 6 labels, set some properties on
- * them and see what changes in appearance those properties cause.
- *
- * We start with the setup code that by now you should be familiar with:
- * @until show(bg)
- *
- * For our first label we have a moderately long text(that doesn't fit in the
- * label's width) so we will make it a sliding label. Since the text isn't
- * too long we don't need the animation to be very long, 3 seconds should
- * give us a nice speed:
- * @until show(label
- *
- * For our second label we have the same text, but this time we aren't going
- * to have it slide, we're going to ellipsize it. Because we ask our label
- * widget to ellipsize the text it will first diminsh the fontsize so that it
- * can show as much of the text as possible:
- * @until show(label
- *
- * For the third label we are going to ellipsize the text again, however this
- * time to make sure the fontsize isn't diminshed we will set a line wrap.
- * The wrap won't actually cause a line break because we set the label to
- * ellipsize:
- * @until show(label
- *
- * For our fourth label we will set line wrapping but won't set ellipsis, so
- * that our text will indeed be wrapped instead of ellipsized. For this label
- * we choose character wrap:
- * @until show(label
- *
- * Just two more, for our fifth label we do the same as for the fourth
- * except we set the wrap to word:
- * @until show(label
- *
- * And last but not least for our sixth label we set the style to "marker" and
- * the color to red(the default color is white which would be hard to see on
- * our white background):
- * @until show(label
- *
- * Our example will look like this:
- * @image html screenshots/label_example_01.png
- * @image latex screenshots/label_example_01.eps
- *
- * @example label_example_01.c
- */
+/**
+ * @page slideshow_example Slideshow widget example
+ *
+ * This application is aimed to exemplify the slideshow widget. It
+ * consists of a window with a slideshow widget set as "resize
+ * object", along with a control bar, in the form of a notify. Those
+ * controls will exercise most of the slideshow's API functions.
+ *
+ * We create the slideshow, itself, first, making it @b loop on its
+ * image itens, when in slideshow mode:
+ * @dontinclude slideshow_example.c
+ * @skip slideshow = elm_slideshow_add
+ * @until evas_object_show
+ *
+ * Next, we define the <b>item class</b> for our slideshow
+ * items. Slideshow images are going to be Elementary @ref Photo "photo"
+ * widgets, here, as pointed by our @c get class
+ * function. We'll let the Elementary infrastructure to delete those
+ * objects for us, and, as there's no additional data attached to our
+ * slideshow items, the @c del class function can be left undefined:
+ * @dontinclude slideshow_example.c
+ * @skip itc
+ * @until ;
+ * @dontinclude slideshow_example.c
+ * @skip itc.func
+ * @until = NULL
+ * @dontinclude slideshow_example.c
+ * @skip get our images to make slideshow items
+ * @until }
+ *
+ * We now get to populate the slideshow widget with items. Our images
+ * are going to be some randomly chosen from the Elementary package,
+ * nine of them. For the first eight, we insert them ordered in the
+ * widget, by using elm_slideshow_item_sorted_insert(). The comparing
+ * function will use the image names to sort items. The last item is
+ * inserted at the end of the slideshow's items list, with
+ * elm_slideshow_item_add(). We check out how that list ends with
+ * elm_slideshow_items_get(), than:
+ * @dontinclude slideshow_example.c
+ * @skip static const char *img
+ * @until _2
+ * @dontinclude slideshow_example.c
+ * @skip first =
+ * @until data_get
+ *
+ * Note that we save the pointers to the first and last items in the
+ * slideshow, for future use.
+ *
+ * What follows is the code creating a notify, to be shown over the
+ * slideshow's viewport, with knobs to act on it. We're not showing
+ * that boilerplate code, but only the callbacks attached to the
+ * interesting smart events of those knobs. The first four are
+ * buttons, which will:
+ * - Select the @b next item in the slideshow
+ * - Select the @b previous item in the slideshow
+ * - Select the @b first item in the slideshow
+ * - Select the @b last item in the slideshow
+ *
+ * Check out the code for those four actions, being the two last @c
+ * data pointers the same @c first and @c last pointers we save
+ * before, respectively:
+ * @dontinclude slideshow_example.c
+ * @skip jump to next
+ * @until }
+ * @until }
+ * @until }
+ * @until }
+ *
+ * What follow are two hoversels, meant for one to change the
+ * slideshow's @b transition and @b layout styles, respectively. We
+ * fetch all the available transition and layout names to populate
+ * those widgets and, when one selects any of them, we apply the
+ * corresponding setters on the slideshow:
+ * @dontinclude slideshow_example.c
+ * @skip hv = elm_hoversel_add
+ * @until show(hv)
+ * @until show(hv)
+ * @dontinclude slideshow_example.c
+ * @skip transition changed
+ * @until }
+ * @until }
+ *
+ * For one to change the transition @b time on the slideshow widget,
+ * we use a spinner widget. We set it to the initial value of 3
+ * (seconds), which will be probed by the next knob -- a button
+ * starting the slideshow, de facto. Note that changing the transition
+ * time while a slideshow is already happening will ajust its
+ * transition time:
+ * @dontinclude slideshow_example.c
+ * @skip spin = elm_spinner_add
+ * @until evas_object_show
+ * @dontinclude slideshow_example.c
+ * @skip slideshow transition time has
+ * @until }
+ *
+ * Finally, we have two buttons which will, respectively, start and
+ * stop the slideshow on our widget. Here are their "clicked"
+ * callbacks:
+ * @dontinclude slideshow_example.c
+ * @skip start the show
+ * @until }
+ * @until }
+ *
+ * This is how the example program's window looks like:
+ * @image html screenshots/slideshow_example.png
+ * @image latex screenshots/slideshow_example.eps width=\textwidth
+ *
+ * See the full @ref slideshow_example_c "source code" for
+ * this example.
+ *
+ * @example slideshow_example.c
+ */
- /**
- * @page tutorial_image Image example
- * @dontinclude image_example_01.c
- *
- * This example is as simple as possible. An image object will be added to the
- * window over a white background, and set to be resizeable together with the
- * window. All the options set through the example will affect the behavior of
- * this image.
- *
- * We start with the code for creating a window and its background, and also
- * add the code to write the path to the image that will be loaded:
- *
- * @skip int
- * @until snprintf
- *
- * Now we create the image object, and set that file to be loaded:
- *
- * @until }
- *
- * We can now go setting our options.
- *
- * elm_image_no_scale_set() is used just to set this value to true (we
- * don't want to scale our image anyway, just resize it).
- *
- * elm_image_scale_set() is used to allow the image to be resized to a size
- * smaller than the original one, but not to a size bigger than it.
- *
- * elm_elm_image_smooth_set() will disable the smooth scaling, so the scale
- * algorithm used to scale the image to the new object size is going to be
- * faster, but with a lower quality.
- *
- * elm_image_orient_set() is used to flip the image around the (1, 0) (0, 1)
- * diagonal.
- *
- * elm_image_aspect_ratio_retained_set() is used to keep the original aspect
- * ratio of the image, even when the window is resized to another aspect ratio.
- *
- * elm_image_fill_outside_set() is used to ensure that the image will fill the
- * entire area available to it, even if keeping the aspect ratio. The image
- * will overflow its width or height (any of them that is necessary) to the
- * object area, instead of resizing the image down until it can fit entirely in
- * this area.
- *
- * elm_image_editable_set() is used just to cover the API, but won't affect
- * this example since we are not using any copy & paste property.
- *
- * This is the code for setting these options:
- *
- * @until editable
- *
- * Now some last touches in our object size hints, window and background, to
- * display this image properly:
- *
- * @until ELM_MAIN
- *
- * This example will look like this:
- *
- * @image html screenshots/image_example_01.png
- * @image latex screenshots/image_example_01.eps
- *
- * @example image_example_01.c
- */
+/**
+ * @page tutorial_photocam Photocam example
+ * @dontinclude photocam_example_01.c
+ *
+ * In this example we will have a photocam and a couple of buttons and slider to
+ * control the photocam. To avoid cluttering we'll only show the parts of the
+ * example that relate to the photocam, the full source code can be seen @ref
+ * photocam_example_01.c "here".
+ *
+ * Creating a photocam is as easy as creating any other widget:
+ * @skipline elm_photocam_add
+ *
+ * A photocam is only useful if we have a image on it, so lets set a file for it
+ * to work with:
+ * @until file_set
+ *
+ * We now set the photocam to not bounce horizontally:
+ * @until bounce_set
+ *
+ * And we want to know when the photocam has finished loading the image so:
+ * @until smart_callback
+ *
+ * The reason to know when the image is loaded is so that we can bring the
+ * center of the image into view:
+ * @skip static
+ * @until }
+ *
+ * As mentioned we have 2 buttons in this example, the "Fit" one will cause
+ * the photocam to go in to a zoom mode that makes the image fit inside the
+ * photocam. Tough this has no effect on the image we also print what region was
+ * being viewed before setting the zoom mode:
+ * @until }
+ * @note When in fit mode our slider(explained below) won't work.
+ *
+ * The second button("Unfit") will bring the photocam back into manual zoom
+ * mode:
+ * @until }
+ *
+ * Our slider controls the level of zoom of the photocam:
+ * @until }
+ * @note It is important to note that this only works when in manual zoom mode.
+ *
+ * Our example will initially look like this:
+ *
+ * @image html screenshots/photocam_example_01.png
+ * @image latex screenshots/photocam_example_01.eps width=\textwidth
+ *
+ * @example photocam_example_01.c
+ */
+
+/**
+ * @page inwin_example_01 Inwin - General overview
+ *
+ * Inwin is a very simple widget to show, so this example will be a very simple
+ * one, just using all of the available API.
+ *
+ * The program is nothing but a window with a lonely button, as shown here.
+ *
+ * @image html screenshots/inwin_example.png
+ * @image latex screenshots/inwin_example.eps width=\textwidth
+ *
+ * And pressing the button makes an inwin appear.
+ *
+ * @image html screenshots/inwin_example_a.png
+ * @image latex screenshots/inwin_example_a.eps width=\textwidth
+ *
+ * And the code is just as simple. We being with some global variables to keep
+ * track of our Inwin.
+ * @dontinclude inwin_example.c
+ * @skip static
+ * @until current_style
+ *
+ * And two callbacks used by the buttons the above screenshot showed. In these,
+ * we check if @c inwin exists and execute the proper action on it. If it's not
+ * there anymore, then we were abandoned to our luck, so we disabled ourselves.
+ * @until _inwin_destroy
+ * @until }
+ * @until }
+ *
+ * The lonely button from the beginning, when clicked, will call the following
+ * function, which begins by checking if an inwin exists, and if it's there,
+ * we bring it back to the front and exit from our function without any further
+ * ado.
+ * @until }
+ *
+ * But if no inwin is there to show, we need to create one. First we need the
+ * top-most window for the program, as no inwin can be created using other
+ * objects as parents. Then we create our popup, set the next style in the list
+ * and show it.
+ * @until current_style =
+ *
+ * As for the content of our inwin, it's just a box with a label and some
+ * buttons inside.
+ * @until _inwin_destroy
+ * @until }
+ *
+ * Now, all the code above shows how every object must always be set as content
+ * for some other object, be it by setting the full content, packing it in a
+ * box or table or working as icon for some other widget. But we didn't do
+ * anything like that for the inwin, this one is just created and shown and
+ * everything works. Other widgets can be used this way, but they would need
+ * to be placed and resized manually or nothing would be shown correctly. The
+ * inwin, however, sets itself as a children of the top-level window and will
+ * be resized as the parent window changes too.
+ *
+ * Another characteristic of Inwin is that when it's shown above everyone else,
+ * it will work kind of like a modal window, blocking any other widget from
+ * receiving events until the window is manually dismissed by pressing some
+ * button to close it or having blocking task signalling its completion so
+ * normal operations can be resumed. This is unlike the @ref Hover widget,
+ * that would show its content on top of the designated target, but clicking
+ * anywhere else would dismiss it automatically.
+ *
+ * To illustrate that last point, when we close the main window and an inwin
+ * is still there, we'll take out the content from the inwin and place it in
+ * a hover.
+ * @until }
+ * @until }
+ *
+ * And the rest of the program doesn't have anything else related to inwin,
+ * so it won't be shown here, but you can find it in
+ * @ref inwin_example.c "inwin_example.c".
+ *
+ * @example inwin_example.c
+ */
/**
- * @page tutorial_hoversel Hoversel example
- * @dontinclude hoversel_example_01.c
+ * @page tutorial_scroller Scroller example
+ * @dontinclude scroller_example_01.c
*
- * In this example we will create a hoversel with 3 items, one with a label but
- * no icon and two with both a label and an icon. Every item that is clicked
- * will be deleted, but everytime the hoversel is activated we will also add an
- * item. In addition our first item will print all items when clicked and our
- * third item will clear all items in the hoversel.
+ * This example is very short and will illustrate one way to use a scroller.
+ * We'll omit the declaration of the @p text variable because it's a very long
+ * @htmlonly<a href="http://lipsum.com/">@endhtmlonly ipsum lorem
+ * @htmlonly</a>@endhtmlonly. If you really want to see the full code, it's @ref
+ * scroller_example_01.c "scroller_example_01.c".
*
- * We will start with the normal creation of window stuff:
+ * We start our example by creating our window and background:
+ * @skip EAPI
* @until show(bg)
*
- * Next we will create a red rectangle to use as the icon of our hoversel:
- * @until show
+ * Next we create a label and set it's text to @p text(very long ipsum lorem):
+ * @until show(label)
+ *
+ * We then create our scroller, ask that it have the same size as the window and
+ * set its content:
+ * @until content_set
+ *
+ * We are now going to set a number of properties in our scroller:
+ * @li We make it bounce horizontally but not vertically.
+ * @li We make both scrollbars always be visible.
+ * @li We have the events be propagated from the content to the scroller.
+ * @li We enforce a page policy vertically(having a page be the size of the
+ * viewport) and leave horizontal scrolling free.
+ * @li And finally we ask the scroller to show us a region starting at 50,50 and
+ * having a width and height of 200px.
+ * @until region_show
+ * @note Observant reader will note that the elm_scroller_region_show() didn't
+ * scroll the view vertically, this is because we told the scroller to only
+ * accept vertical scrolling in pages.
+ *
+ * And now we're done:
+ * @until ELM_MAIN
*
- * And now we create our hoversel and set some of it's properties. We set @p win
- * as its parent, ask it to not be horizontal(be vertical) and give it a label
- * and icon:
- * @until icon_set
+ * Our example will look like this:
*
- * Next we will add our three items, setting a callback to be called for the
- * first and third:
- * @until _rm_items
+ * @image html screenshots/scroller_example_01.png
+ * @image latex screenshots/scroller_example_01.eps width=\textwidth
*
- * We also set a pair of callbacks to be called whenever any item is selected or
- * when the hoversel is activated:
- * @until clicked
+ * @example scroller_example_01.c
+ */
+
+/**
+ * @page tutorial_table_01
*
- * And then ask that our hoversel be shown and run the main loop:
+ * In this example we add four labels to a homogeneous table that has a padding
+ * of 5px between cells.
+ *
+ * The interesting bits from this example are:
+ * @li Where we set the table as homogeneous and the padding:
+ * @dontinclude table_example_01.c
+ * @skip padding_set
+ * @until homogeneous_set
+ * @li Where we add each label to the table:
+ * @skipline elm_table_pack
+ * @skipline elm_table_pack
+ * @skipline elm_table_pack
+ * @skipline elm_table_pack
+ *
+ * Here you can see the full source:
+ * @include table_example_01.c
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/table_example_01.png
+ * @image latex screenshots/table_example_01.eps width=\textwidth
+ *
+ * @example table_example_01.c
+ */
+
+/**
+ * @page tutorial_table_02
+ *
+ * For our second example we'll create a table with 4 rectangles in it. Since
+ * our rectangles are of different sizes our table won't be homogeneous.
+ *
+ * The interesting bits from this example are:
+ * @li Where we set the table as not homogeneous:
+ * @dontinclude table_example_02.c
+ * @skipline homogeneous_set
+ * @li Where we add each rectangle to the table:
+ * @skipline elm_table_pack
+ * @skipline elm_table_pack
+ * @skipline elm_table_pack
+ * @skipline elm_table_pack
+ *
+ * Here you can see the full source:
+ * @include table_example_02.c
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/table_example_02.png
+ * @image latex screenshots/table_example_02.eps width=\textwidth
+ *
+ * @example table_example_02.c
+ */
+
+/**
+ * @page tutorial_menu Menu Example
+ * @dontinclude menu_example_01.c
+ *
+ * This example shows how to create a menu with regular items, object items,
+ * submenus and how to delete items from a menu. The full source for this
+ * example is @ref menu_example_01.c "menu_example_01.c".
+ *
+ * We'll start looking at the menu creation and how to create a very simple
+ * item:
+ * @skip menu_add
+ * @until item_add
+ *
+ * For our next item we are going to add an icon:
+ * @until item_add
+ *
+ * Now we are going to add more items, but these icons are going to have a
+ * parent, which will put them in a sub-menu. First just another item with an
+ * icon:
+ * @until item_add
+ *
+ * Next we are going to add a button to our menu(any elm widget can be added to
+ * a menu):
+ * @until item_add
+ *
+ * We are also going to have the button delete the first item of our
+ * sub-menu when clicked:
+ * @until smart_callback
+ * @dontinclude menu_example_01.c
+ * @skip static
+ * @until }
+ *
+ * We now add a separator and three more regular items:
+ * @until item_add
+ * @until item_add
+ * @until item_add
+ *
+ * We now add another item, however this time it won't go the sub-menu and it'll
+ * be disabled:
+ * @until disabled_set
+ *
+ * To make sure that our menu is shown whenever the window is clicked(and where
+ * clicked) we use the following callback:
+ * @dontinclude menu_example_01.c
+ * @skip static
+ * @skipline static
+ * @until }
+ *
+ * Our example will look like this:
+ *
+ * @image html screenshots/menu_example_01.png
+ * @image latex screenshots/menu_example_01.eps width=\textwidth
+ *
+ * @example menu_example_01.c
+ */
+
+/**
+ * @page win_example_01 Win - General API overview
+ *
+ * For most users of the Elementary API, the @ref Win widget has a lot more
+ * functions than what they need.
+ *
+ * In general, a developer will create a window, set some content on it and
+ * forget about it for the rest of its program's life, letting whatever
+ * Window Manager is there to handle the window. Here, however, we are going
+ * to show how to generally manage a window.
+ *
+ * We'll have a bit more than the usual includes here, since part of the
+ * example requires some low level fiddling.
+ * @dontinclude win_example.c
+ * @skip Elementary.h
+ * @until Ecore_X.h
+ *
+ * The program then, consists of one window with two lists of buttons, each
+ * of which operates on another two windows. One of them is a normal window,
+ * the other has the @c override flag set so the Window Manager ignores it.
+ *
+ * Pressing each button will call the corresponding function to act on the
+ * corresponding window. These are pretty self explanatory, so we'll show
+ * them in one batch.
+ * @skip static void
+ * @until elm_win_sticky_set
+ * @until }
+ *
+ * Next, we handle the main window closing. We have a @c "delete,request"
+ * callback set to ask if really want to quit. If so, we end the main loop,
+ * otherwise just delete the popup message and continue running normally.
+ * @until _no_quit_cb
+ * @until _no_quit_cb
+ * @until }
+ *
+ * The non-managed window, being completely ignored by the Window Manager,
+ * is likely to never receive keyboard focus, even if we click on its entry
+ * to write something. So we have a button on it that will forcefully focus
+ * it by using some lower level functions to act directly on the X window.
+ * Then, each time one of the window is focused, we print some message on a
+ * console to show this more clearly.
+ * @until _win_focused_cb
+ * @until }
+ *
+ * And to finalize, the main function creates a window to hold all the action
+ * buttons and another two to show how (and what) works on each of them.
+ *
+ * First, the main window will be a normal window, we'll enable the focus
+ * highlight regardless of how it is configured so it's easier to navigate
+ * the window with the keyboard. Then we hook our focus and delete callbacks
+ * and set up the rest of the window's content.
+ * @until evas_object_show(box)
+ *
+ * The first of our sub-windows is the managed one. We'll create it as a
+ * dialog, which should make the Window Manager treat it as a non-resizable
+ * window. We are also setting the window to be auto-deleted when the close
+ * button in the titlebar is pressed.
+ * @until evas_object_show(o)
+ *
+ * Now, we added an icon to the window as a resize object. We also set this
+ * icon to not scale, and no weight size hints have been set for it. This way,
+ * even if we hadn't created the window as a dialog, it would still not be
+ * resizable. The window size is defined by its content, so it would never be
+ * smaller than the smallest of its resize objects, and for it to be resizable,
+ * all of those objects have to allow it.
+ *
+ * Next, we add the buttons with the actions to perform on this window. Using
+ * a macro saves us typing and makes the world a happier place.
+ * @until WIN_ACTION(sticky)
+ *
+ * The maximize one is likely to not work, because the Window Manager will
+ * probably not enforce it upon a window that states its maximum size, much
+ * less a dialog. But that can be changed by editting the example to use
+ * #ELM_WIN_BASIC when creating the window and adding the following line to
+ * the icon set as content
+ * @code
+ * evas_object_size_hint_weight_set(o, EVAS_HINT_EXPAND, EVAS_HINT_EXPAND);
+ * @endcode
+ *
+ * Lastly, the second sub-window will have it's override flag set. In it we
+ * have a label with some text, and entry and a button. The entry can be
+ * clicked normally to set focus on it, but whether it actually gets keyboard
+ * input will also depend on the window getting focus, and since the window
+ * is an override one, it will probably not gain it by normal means. The
+ * button is there to force the focus at the X level to go to our window.
+ * And to finish, another list of buttons with actions to perform on this
+ * last window. Remember that most of them are requests or hints for the
+ * Window Manager, so they are likely to do nothing on this window.
+ * Similarly, there won't be any way to move it or resize it, because we
+ * haven't implemented that kind of control on this example and that's
+ * something controlled by Window Managers on windows they are tracking, which
+ * is not the case with this one.
* @until ELM_MAIN
*
- * We now have the callback for our first item which prints all items in the
- * hoversel:
+ * The full code listing of this example can be found at
+ * @ref win_example.c "win_example.c".
+ *
+ * @example win_example.c
+ */
+
+/**
+ * @page web_example_01 Web - Simple example
+ *
+ * WebKit-EFL is independent of any particular toolkit, such as Elementary,
+ * so using it on applications requires that the programmer writes a lot of
+ * boiler plate code to manage to manage the web object.
+ *
+ * For a full featured browser this may make sense, as the programmer will
+ * want to have full control of every aspect of the web object, since it's the
+ * main component of the application. But other programs with simpler
+ * requirements, having to write so much code is undesired.
+ *
+ * This is where elm_web comes in. Its purpose is to provide a simple way
+ * for developers to embed a simple web object in their programs, simplifying
+ * the common use cases.
+ *
+ * This is not to say that a browser can't be made out of it, as this example
+ * shows.
+ *
+ * We'll be making a simple browser, consisting of one window with an URL bar,
+ * a toolbar to be used for the tabs and a pager to show one page at a time.
+ *
+ * When all tabs are closed, we'll be showing a default view with some custom
+ * content, for which we need to get the internal @c ewk_view object and use
+ * some WebKit functions on it, thus we need to include the necessary headers
+ * first.
+ *
+ * @dontinclude web_example.c
+ * @skip include
+ * @until EWebKit
+ *
+ * A struct to keep track of the different widgets in use and the currently
+ * shown tab. There's also an @c exiting flag, used to work around the overly
+ * simplistic way in which this example is written, just to avoid some
+ * warnings when closing the program.
+ *
+ * @skip typedef
+ * @skip typedef
+ * @until App_Data
+ *
+ * Each tab has its own struct too, but there's not much to it.
+ * @until };
+ *
+ * Whenever the currently selected tab changes, we need to update some state
+ * on the application. The back and forward buttons need to be disabled
+ * accordingly and the URL bar needs to show the right address.
+ *
+ * @skip static void
+ * @until pager_content_promote
* @until }
*
- * Next we have the callback for our third item which removes all items from the
- * hoversel:
+ * Other updates happen based on events from the web object, like title change
+ * to update the name shown in the tab, and URL change which will update the
+ * URL bar if the event came from the currently selected tab.
+ *
+ * @skip tab_current_set
+ * @skip static void
+ * @until }
* @until }
*
- * Next we have the callback that is called whenever an item is clicked and
- * deletes that item:
+ * Adding a new tab is just a matter of creating a new web widget, its data
+ * and pushing it into the pager. A lot of the things that we should handle
+ * here, such as how to react to popups and JavaScript dialogs, are done
+ * already in the @c elm_web widget, so we can rely on their default
+ * implementations. For the JavaScript dialogs we are going to avoid having
+ * them open in a new window by setting the @c Inwin mode.
+ *
+ * There is no default implementation, however, for the requests to create a
+ * new window, so we have to handle them by setting a callback function that
+ * will ultimately call this very same function to add a new tab.
+ *
+ * @skip Tab_Data
* @until }
*
- * And the callback that is called when the hoversel is activated and adds an
- * item to the hoversel. Note that since we allocate memory for the item we need
- * to know when the item dies so we can free that memory:
+ * Entering an address in the URL bar will check if a tab exists, and if not,
+ * create one and set the URL for it. The address needs to conform to the URI
+ * format, so we check that it does and add the protocol if it's missing.
+ *
+ * @skip static char
+ * @until eina_stringshare_del
* @until }
*
- * And finally the callback that frees the memory we allocated for items created
- * in the @p _add_item callback:
+ * The navigation buttons are simple enough. As for the refresh, it normally
+ * reloads the page using anything that may exist in the caches if applicable,
+ * but we can press it while holding the @c Shift key to avoid the cache.
+ *
+ * @skip static void
+ * @until web_forward
* @until }
*
- * Our example will initially look like this:
- * @image html screenshots/hoversel_example_01.png
- * @image latex screenshots/hoversel_example_01.eps
+ * The callback set for the new window request creates a new tab and returns
+ * the web widget associated with it. This is important, this function must
+ * return a valid web widget returned by elm_web_add().
*
- * And when the hoversel is clicked it will look like this:
- * @image html screenshots/hoversel_example_01_a.png
- * @image latex screenshots/hoversel_example_01_a.eps
+ * @skip static Evas_Object
+ * @until }
*
- * @example hoversel_example_01.c
+ * Pressing @c Ctrl-F will bring up the search box. Nothing about the box
+ * itself is worth mentioning here, but it works as you would expect from any
+ * other browser. While typing on it, it will highlight all occurrences of the
+ * searched word. Pressing @c Enter will go to the next instance and the two
+ * buttons next to the entry will move forward and backwards through the found
+ * keywords.
+ *
+ * @skip win_del_request
+ * @skip static void
+ * @until win_search_trigger
+ * @until }
+ *
+ * Last, create the main window and put all of the things used above in it. It
+ * contains a default web widget that will be shown when no tabs exist. This
+ * web object is not browsable per se, so history is disabled in it, and we
+ * set the same callback to create new windows, on top of setting some custom
+ * content of our own on it, with some links that will open new tabs to start
+ * browsing quickly.
+ *
+ * @skip static void
+ * @until ELM_MAIN
+ *
+ * Some parts of the code were left out, as they are not relevant to the
+ * example, but the full listing can be found at @ref web_example.c
+ * "web_example.c".
+ *
+ * @example web_example.c
+ */
+
+/**
+ * @page efl_thread_1 EFL Threading example 1
+ *
+ * You can use threads with Elementary (and EFL) but you need to be careful
+ * to only use eina or eet calls inside a thread. Other libraries are not
+ * totally threadsafe except for some specific ecore calls designed for
+ * working from threads like the ecore_pipe_write() and ecore_thread calls.
+ *
+ * Below is an example of how to use EFL calls from a native thread you have
+ * already created. You have to put the EFL calls inside the critical block
+ * between ecore_thread_main_loop_begin() and ecore_thread_main_loop_end()
+ * which ensure you gain a lock on the mainloop. Beware that this requires
+ * that the thread WAIT to synchronize with the mainloop at the beginning of
+ * the critical section. It is highly suggested you use as few of these
+ * in your thread as possible and probably put just a single
+ * ecore_thread_main_loop_begin() / ecore_thread_main_loop_end() section
+ * at the end of the threads calculation or work when it is done and
+ * would otherwise exit to sit idle.
+ *
+ * For a progression of examples that become more complex and show other
+ * ways to use threading with EFL, please see:
+ *
+ * @ref efl_thread_2
+ *
+ * @ref efl_thread_3
+ *
+ * @ref efl_thread_4
+ *
+ * @ref efl_thread_5
+ *
+ * @ref efl_thread_6
+ *
+ * @include efl_thread_1.c
+ */
+
+/**
+ * @page efl_thread_2 EFL Threading example 2
+ *
+ * You can also use ecore_main_loop_thread_safe_call_sync() to call a
+ * specific function that needs to do EFL main loop operations. This call
+ * will block and wait to synchronise to the mainloop just like
+ * ecore_thread_main_loop_begin() / ecore_thread_main_loop_end() will,
+ * but instead you simply provide it the function callback to call instead
+ * of inlining your code.
+ *
+ * @ref efl_thread_3
+ *
+ * @ref efl_thread_4
+ *
+ * @ref efl_thread_5
+ *
+ * @ref efl_thread_6
+ *
+ * @include efl_thread_2.c
+ */
+
+/**
+ * @page efl_thread_3 EFL Threading example 3
+ *
+ * Like with ecore_main_loop_thread_safe_call_sync() you can provide a
+ * callback to call inline in the mainloop, but this time with
+ * ecore_main_loop_thread_safe_call_async() the callback is queued and
+ * called asynchronously, without the thread blocking. The mainloop will
+ * call this function when it comes around to its synchronisation point. This
+ * acts as a "fire and forget" way of having the mainloop do some work
+ * for a thread that has finished processing some data and is read to hand it
+ * off to the mainloop and the thread wants to march on and do some more work
+ * while the main loop deals with "displaying" the results of the previous
+ * calculation.
+ *
+ * @ref efl_thread_4
+ *
+ * @ref efl_thread_5
+ *
+ * @ref efl_thread_6
+ *
+ * @include efl_thread_3.c
+ */
+
+/**
+ * @page efl_thread_4 EFL Threading example 4
+ *
+ * Now when you want to have a thread do some work, send back results to
+ * the mainloop and continue running but the mainloop controls when the
+ * thread should stop working, you need some extra flags. This is an example
+ * of how you might use ecore_main_loop_thread_safe_call_async() and pthreads
+ * to do this.
+ *
+ * @ref efl_thread_5
+ *
+ * @ref efl_thread_6
+ *
+ * @include efl_thread_4.c
+ */
+
+/**
+ * @page efl_thread_5 EFL Threading example 5
+ *
+ * This is the same as @ref efl_thread_4 but now uses the ecore_thread
+ * infrastructure to have a running worker thread that feeds results back
+ * to the mainloop and can easily be cancelled. This saves some code in the
+ * application and makes for fewer problem spots if you forget a mutex.
+ *
+ * @ref efl_thread_6
+ *
+ * @include efl_thread_5.c
+ */
+
+/**
+ * @page efl_thread_6 EFL Threading example 6
+ *
+ * You can also use the ecore_thread infrastructure for compute tasks that
+ * don't send feedback as they go - they are one-shot compute jobs and when
+ * done they will trigger the end callback in the mainloop which is intended
+ * to pick up the results and "display them".
+ *
+ * @include efl_thread_6.c
*/
/**
*/
/**
- * @page animator_example_01_c Animator example 01
- * @include animator_example_01.c
- * @example animator_example_01.c
- */
-
-/**
* @page transit_example_01_c Transit example 1
* @include transit_example_01.c
* @example transit_example_01.c
* @include general_funcs_example.c
* @example general_funcs_example.c
*/
+
+/**
+ * @page clock_example_c Clock example
+ * @include clock_example.c
+ * @example clock_example.c
+ */
+
+/**
+ * @page flipselector_example_c Flipselector example
+ * @include flipselector_example.c
+ * @example flipselector_example.c
+ */
+
+/**
+ * @page fileselector_example_c Fileselector example
+ * @include fileselector_example.c
+ * @example fileselector_example.c
+ */
+
+/**
+ * @page fileselector_button_example_c Fileselector button example
+ * @include fileselector_button_example.c
+ * @example fileselector_button_example.c
+ */
+
+/**
+ * @page fileselector_entry_example_c Fileselector entry example
+ * @include fileselector_entry_example.c
+ * @example fileselector_entry_example.c
+ */
+
+/**
+ * @page index_example_01_c Index example
+ * @include index_example_01.c
+ * @example index_example_01.c
+ */
+
+/**
+ * @page index_example_02_c Index example
+ * @include index_example_02.c
+ * @example index_example_02.c
+ */
+
+/**
+ * @page layout_example_01_c layout_example_01.c
+ * @include layout_example_01.c
+ * @example layout_example_01.c
+ */
+
+/**
+ * @page layout_example_02_c layout_example_02.c
+ * @include layout_example_02.c
+ * @example layout_example_02.c
+ */
+
+/**
+ * @page layout_example_03_c layout_example_03.c
+ * @include layout_example_03.c
+ * @example layout_example_03.c
+ */
+
+/**
+ * @page layout_example_edc An example of layout theme file
+ *
+ * This theme file contains two groups. Each of them is a different theme, and
+ * can be used by an Elementary Layout widget. A theme can be used more than
+ * once by many different Elementary Layout widgets too.
+ *
+ * @include layout_example.edc
+ * @example layout_example.edc
+ */
+
+/**
+ * @page gengrid_example_c Gengrid example
+ * @include gengrid_example.c
+ * @example gengrid_example.c
+ */
+
+/**
+ * @page genlist_example_01_c genlist_example_01.c
+ * @include genlist_example_01.c
+ * @example genlist_example_01.c
+ */
+
+/**
+ * @page genlist_example_02_c genlist_example_02.c
+ * @include genlist_example_02.c
+ * @example genlist_example_02.c
+ */
+
+/**
+ * @page genlist_example_04_c genlist_example_04.c
+ * @include genlist_example_04.c
+ * @example genlist_example_04.c
+ */
+
+/**
+ * @page genlist_example_05_c genlist_example_05.c
+ * @include genlist_example_05.c
+ * @example genlist_example_05.c
+ */
+
+/**
+ * @page thumb_example_01_c thumb_example_01.c
+ * @include thumb_example_01.c
+ * @example thumb_example_01.c
+ */
+
+/**
+ * @page progressbar_example_c Progress bar example
+ * @include progressbar_example.c
+ * @example progressbar_example.c
+ */
+
+/**
+ * @page slideshow_example_c Slideshow example
+ * @include slideshow_example.c
+ * @example slideshow_example.c
+ */
+
+/**
+ * @page efl_thread_1_c EFL Threading example 1
+ * @include efl_thread_1.c
+ * @example efl_thread_1.c
+ */
+
+/**
+ * @page efl_thread_2_c EFL Threading example 2
+ * @include efl_thread_2.c
+ * @example efl_thread_2.c
+ */
+
+/**
+ * @page efl_thread_3_c EFL Threading example 3
+ * @include efl_thread_3.c
+ * @example efl_thread_3.c
+ */
+
+/**
+ * @page efl_thread_4_c EFL Threading example 4
+ * @include efl_thread_4.c
+ * @example efl_thread_4.c
+ */
+
+/**
+ * @page efl_thread_5_c EFL Threading example 5
+ * @include efl_thread_5.c
+ * @example efl_thread_5.c
+ */
+
+/**
+ * @page efl_thread_6_c EFL Threading example 6
+ * @include efl_thread_6.c
+ * @example efl_thread_6.c
+ */