<article id="index">
<articleinfo>
<title>D-Bus Specification</title>
- <releaseinfo>Version 0.15</releaseinfo>
- <date>3 November 2010</date>
+ <releaseinfo>Version 0.17</releaseinfo>
+ <date>(not final)</date>
<authorgroup>
<author>
<firstname>Havoc</firstname>
</address>
</affiliation>
</author>
+ <author>
+ <firstname>Sven</firstname>
+ <surname>Herzberg</surname>
+ <affiliation>
+ <orgname>Imendio AB</orgname>
+ <address>
+ <email>sven@imendio.com</email>
+ </address>
+ </affiliation>
+ </author>
</authorgroup>
<revhistory>
<revision>
<revremark></revremark>
</revision>
<revision>
+ <revnumber>0.16</revnumber>
+ <date>11 April 2011</date>
+ <authorinitials></authorinitials>
+ <revremark>add path_namespace, arg0namespace; argNpath matches object
+ paths</revremark>
+ </revision>
+ <revision>
<revnumber>0.15</revnumber>
<date>3 November 2010</date>
<authorinitials></authorinitials>
</row><row>
<entry><literal>STRUCT</literal></entry>
<entry>114 (ASCII 'r'), 40 (ASCII '('), 41 (ASCII ')')</entry>
- <entry>Struct</entry>
+ <entry>Struct; type code 114 'r' is reserved for use in
+ bindings and implementations to represent the general
+ concept of a struct, and must not appear in signatures
+ used on D-Bus.</entry>
</row><row>
<entry><literal>VARIANT</literal></entry>
<entry>118 (ASCII 'v') </entry>
</row><row>
<entry><literal>DICT_ENTRY</literal></entry>
<entry>101 (ASCII 'e'), 123 (ASCII '{'), 125 (ASCII '}') </entry>
- <entry>Entry in a dict or map (array of key-value pairs)</entry>
+ <entry>Entry in a dict or map (array of key-value pairs).
+ Type code 101 'e' is reserved for use in bindings and
+ implementations to represent the general concept of a
+ dict or dict-entry, and must not appear in signatures
+ used on D-Bus.</entry>
</row><row>
<entry><literal>UNIX_FD</literal></entry>
<entry>104 (ASCII 'h')</entry>
<entry>Unix file descriptor</entry>
</row>
+ <row>
+ <entry>(reserved)</entry>
+ <entry>109 (ASCII 'm')</entry>
+ <entry>Reserved for <ulink
+ url="https://bugs.freedesktop.org/show_bug.cgi?id=27857">a
+ 'maybe' type compatible with the one in GVariant</ulink>,
+ and must not appear in signatures used on D-Bus until
+ specified here</entry>
+ </row>
+ <row>
+ <entry>(reserved)</entry>
+ <entry>42 (ASCII '*')</entry>
+ <entry>Reserved for use in bindings/implementations to
+ represent any <firstterm>single complete type</firstterm>,
+ and must not appear in signatures used on D-Bus.</entry>
+ </row>
+ <row>
+ <entry>(reserved)</entry>
+ <entry>63 (ASCII '?')</entry>
+ <entry>Reserved for use in bindings/implementations to
+ represent any <firstterm>basic type</firstterm>, and must
+ not appear in signatures used on D-Bus.</entry>
+ </row>
+ <row>
+ <entry>(reserved)</entry>
+ <entry>64 (ASCII '@'), 38 (ASCII '&'),
+ 94 (ASCII '^')</entry>
+ <entry>Reserved for internal use by bindings/implementations,
+ and must not appear in signatures used on D-Bus.
+ GVariant uses these type-codes to encode calling
+ conventions.</entry>
+ </row>
</tbody>
</tgroup>
</informaltable>
</itemizedlist>
</para>
+ <para>
+ Object paths are often namespaced by starting with a reversed
+ domain name and containing an interface version number, in the
+ same way as
+ <link linkend="message-protocol-names-interface">interface
+ names</link> and
+ <link linkend="message-protocol-names-bus">well-known
+ bus names</link>.
+ This makes it possible to implement more than one service, or
+ more than one version of a service, in the same process,
+ even if the services share a connection but cannot otherwise
+ co-operate (for instance, if they are implemented by different
+ plugins).
+ </para>
+
+ <para>
+ For instance, if the owner of <literal>example.com</literal> is
+ developing a D-Bus API for a music player, they might use the
+ hierarchy of object paths that start with
+ <literal>/com/example/MusicPlayer1</literal> for its objects.
+ </para>
</sect3>
-
<sect3 id="message-protocol-marshaling-signature">
<title>Valid Signatures</title>
<para>
<listitem><para>Interface names must not exceed the maximum name length.</para></listitem>
</itemizedlist>
</para>
+
+ <para>
+ Interface names should start with the reversed DNS domain name of
+ the author of the interface (in lower-case), like interface names
+ in Java. It is conventional for the rest of the interface name
+ to consist of words run together, with initial capital letters
+ on all words ("CamelCase"). Several levels of hierarchy can be used.
+ It is also a good idea to include the major version of the interface
+ in the name, and increment it if incompatible changes are made;
+ this way, a single object can implement several versions of an
+ interface in parallel, if necessary.
+ </para>
+
+ <para>
+ For instance, if the owner of <literal>example.com</literal> is
+ developing a D-Bus API for a music player, they might define
+ interfaces called <literal>com.example.MusicPlayer1</literal>,
+ <literal>com.example.MusicPlayer1.Track</literal> and
+ <literal>com.example.MusicPlayer1.Seekable</literal>.
+ </para>
+
+ <para>
+ D-Bus does not distinguish between the concepts that would be
+ called classes and interfaces in Java: either can be identified on
+ D-Bus by an interface name.
+ </para>
</sect3>
<sect3 id="message-protocol-names-bus">
<title>Bus names</title>
<para>
Connections have one or more bus names associated with them.
- A connection has exactly one bus name that is a unique connection
- name. The unique connection name remains with the connection for
- its entire lifetime.
+ A connection has exactly one bus name that is a <firstterm>unique
+ connection name</firstterm>. The unique connection name remains
+ with the connection for its entire lifetime.
A bus name is of type <literal>STRING</literal>,
meaning that it must be valid UTF-8. However, there are also
some additional restrictions that apply to bus names
specifically:
<itemizedlist>
<listitem><para>Bus names that start with a colon (':')
- character are unique connection names.
+ character are unique connection names. Other bus names
+ are called <firstterm>well-known bus names</firstterm>.
</para>
</listitem>
<listitem><para>Bus names are composed of 1 or more elements separated by
Note that the hyphen ('-') character is allowed in bus names but
not in interface names.
</para>
+
+ <para>
+ Like <link linkend="message-protocol-names-interface">interface
+ names</link>, well-known bus names should start with the
+ reversed DNS domain name of the author of the interface (in
+ lower-case), and it is conventional for the rest of the well-known
+ bus name to consist of words run together, with initial
+ capital letters. As with interface names, including a version
+ number in well-known bus names is a good idea; it's possible to
+ have the well-known bus name for more than one version
+ simultaneously if backwards compatibility is required.
+ </para>
+
+ <para>
+ If a well-known bus name implies the presence of a "main" interface,
+ that "main" interface is often given the same name as
+ the well-known bus name, and situated at the corresponding object
+ path. For instance, if the owner of <literal>example.com</literal>
+ is developing a D-Bus API for a music player, they might define
+ that any application that takes the well-known name
+ <literal>com.example.MusicPlayer1</literal> should have an object
+ at the object path <literal>/com/example/MusicPlayer1</literal>
+ which implements the interface
+ <literal>com.example.MusicPlayer1</literal>.
+ </para>
</sect3>
<sect3 id="message-protocol-names-member">
<title>Member names</title>
<listitem><para>Must be at least 1 byte in length.</para></listitem>
</itemizedlist>
</para>
+
+ <para>
+ It is conventional for member names on D-Bus to consist of
+ capitalized words with no punctuation ("camel-case").
+ Method names should usually be verbs, such as
+ <literal>GetItems</literal>, and signal names should usually be
+ a description of an event, such as <literal>ItemsChanged</literal>.
+ </para>
</sect3>
<sect3 id="message-protocol-names-error">
<title>Error names</title>
<para>
Error names have the same restrictions as interface names.
</para>
+
+ <para>
+ Error names have the same naming conventions as interface
+ names, and often contain <literal>.Error.</literal>; for instance,
+ the owner of <literal>example.com</literal> might define the
+ errors <literal>com.example.MusicPlayer.Error.FileNotFound</literal>
+ and <literal>com.example.MusicPlayer.Error.OutOfMemory</literal>.
+ The errors defined by D-Bus itself, such as
+ <literal>org.freedesktop.DBus.Error.Failed</literal>, follow a
+ similar pattern.
+ </para>
</sect3>
</sect2>
</sect3>
</sect2>
</sect1>
- <sect1 id="naming-conventions">
- <title>Naming Conventions</title>
-
- <para>
- D-Bus namespaces are all lowercase and correspond to reversed domain
- names, as with Java. e.g. "org.freedesktop"
- </para>
- <para>
- Interface, signal, method, and property names are "WindowsStyleCaps", note
- that the first letter is capitalized, unlike Java.
- </para>
- <para>
- Object paths are normally all lowercase with underscores used rather than
- hyphens.
- </para>
- </sect1>
<sect1 id="uuids">
<title>UUIDs</title>
path match is path='/org/freedesktop/Hal/Manager'</entry>
</row>
<row>
- <entry><literal>path_prefix</literal></entry>
- <entry>An object path optionally ending in a slash</entry>
+ <entry><literal>path_namespace</literal></entry>
+ <entry>An object path</entry>
<entry>
<para>
Matches messages which are sent from or to an
- object for which the object path is a descendant of
- the given value. If the prefix ends with a slash, it
- matches all paths starting with that string;
- if it does not end with a slash, it matches either
- that exact path, or that path followed by one or
+ object for which the object path is either the
+ given value, or that value followed by one or
more path components.
</para>
<para>
For example,
- <literal>path_prefix='/com/example/foo'</literal>
+ <literal>path_namespace='/com/example/foo'</literal>
would match signals sent by
<literal>/com/example/foo</literal>
or by
</para>
<para>
- However,
- <literal>path_prefix='/com/example/foo/'</literal>
- would still match signals sent by
- <literal>/com/example/foo/bar</literal>,
- but would not match signals sent by
- <literal>/com/example/foo</literal> or
- <literal>/com/example/foobar</literal>.
+ Using both <literal>path</literal> and
+ <literal>path_namespace</literal> in the same match
+ rule is not allowed.
</para>
+
<para>
<emphasis>
- This match key was added in version 0.15 of the
+ This match key was added in version 0.16 of the
D-Bus specification and implemented by the bus
- daemon in dbus 1.4.7 and later.
+ daemon in dbus 1.5.0 and later.
</emphasis>
</para>
</entry>
argument <literal>"/ca/example/"</literal> to represent atomic modification of
many properties within that directory, and the interested application would be
notified in both cases.</para>
+ <para>
+ <emphasis>
+ This match key was added in version 0.12 of the
+ D-Bus specification, implemented for STRING
+ arguments by the bus daemon in dbus 1.2.0 and later,
+ and implemented for OBJECT_PATH arguments in dbus 1.5.0
+ and later.
+ </emphasis>
+ </para>
</entry>
</row>
<row>
bus name, this can also be used for messages whose
first argument is an interface name.</para>
- <para>If the value has a trailing period, then only bus names or interface names
- within that namespace are matched. If it has no trailing period, an exact
- match is also allowed.</para>
-
<para>For example, the match rule
<literal>member='NameOwnerChanged',arg0namespace='com.example.backend'</literal>
matches name owner changes for bus names such as
<literal>com.example.backend.foo.bar</literal>, and
<literal>com.example.backend</literal> itself.</para>
- <para>On the other hand, the match rule
- <literal>member='NameOwnerChanged',arg0namespace='com.example.backend.'</literal>
- (with a trailing period in the namespace) matches owner changes for
- <literal>com.example.backend.foo</literal> and
- <literal>com.example.backend.foo.bar</literal>, but not for
- <literal>com.example.backend</literal>.
- </para>
-
<para>See also <xref linkend='bus-messages-name-owner-changed'/>.</para>
+ <para>
+ <emphasis>
+ This match key was added in version 0.16 of the
+ D-Bus specification and implemented by the bus
+ daemon in dbus 1.5.0 and later.
+ </emphasis>
+ </para>
</entry>
</row>
</tbody>
<xref linkend="message-bus-types"/>.
</para>
<para>
- [FIXME the file format should be much better specified than "similar to
- .desktop entries" esp. since desktop entries are already
- badly-specified. ;-)] Service description files have the ".service" file
+ Service description files have the ".service" file
extension. The message bus will only load service description files
ending with .service; all other files will be ignored. The file format
is similar to that of <ulink
encoding. To ensure that there will be no name collisions, service files
must be namespaced using the same mechanism as messages and service
names.
+ </para>
+
+ <para>
+ [FIXME the file format should be much better specified than "similar to
+ .desktop entries" esp. since desktop entries are already
+ badly-specified. ;-)]
+ These sections from the specification apply to service files as well:
+
+ <itemizedlist>
+ <listitem><para>General syntax</para></listitem>
+ <listitem><para>Comment format</para></listitem>
+ </itemizedlist>
<figure>
<title>Example service description file</title>
projects / platform / upstream / dbus.git / blobdiff