Overall ROM image size is controlled by CONFIG_ROM_SIZE.
+Note that the debug version of the FSP is bigger in size. If this version
+is used, CONFIG_FSP_ADDR needs to be configured to 0xfffb0000 instead of
+the default value 0xfffc0000.
+
---
Intel Galileo instructions for bare mode:
- Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5))
- Keep VESA framebuffer
+And include coreboot_fb.dtsi in your board's device tree source file, like:
+
+ /include/ "coreboot_fb.dtsi"
+
At present it seems that for Minnowboard Max, coreboot does not pass through
the video information correctly (it always says the resolution is 0x0). This
works correctly for link though.
+Note: coreboot framebuffer driver does not work on QEMU. The reason is unknown
+at this point. Patches are welcome if you figure out anything wrong.
+
Test with QEMU for bare mode
----------------------------
QEMU is a fancy emulator that can enable us to test U-Boot without access to
Here the kernel (bzImage) is loaded to 01000000 and initrd is to 04000000. Then,
'zboot' can be used to boot the kernel:
-=> zboot 02000000 - 04000000 1b1ab50
+=> zboot 01000000 - 04000000 1b1ab50
CPU Microcode
-------------
* S3 (Suspend to RAM), S4 (Suspend to Disk).
Features that are optional:
- * ACPI global NVS support. We may need it to simplify ASL code logic if
- utilizing NVS variables. Most likely we will need this sooner or later.
* Dynamic AML bytecodes insertion at run-time. We may need this to support
SSDT table generation and DSDT fix up.
* SMI support. Since U-Boot is a modern bootloader, we don't want to bring
For other platform boards, ACPI support status can be checked by examining their
board defconfig files to see if CONFIG_GENERATE_ACPI_TABLE is set to y.
+EFI Support
+-----------
+U-Boot supports booting as a 32-bit or 64-bit EFI payload, e.g. with UEFI.
+This is enabled with CONFIG_EFI_STUB. U-Boot can also run as an EFI
+application, with CONFIG_EFI_APP. The CONFIG_EFI_LOADER option, where U-Booot
+provides an EFI environment to the kernel (i.e. replaces UEFI completely but
+provides the same EFI run-time services) is not currently supported on x86.
+
+See README.efi for details of EFI support in U-Boot.
+
+64-bit Support
+--------------
+U-Boot supports booting a 64-bit kernel directly and is able to change to
+64-bit mode to do so. It also supports (with CONFIG_EFI_STUB) booting from
+both 32-bit and 64-bit UEFI. However, U-Boot itself is currently always built
+in 32-bit mode. Some access to the full memory range is provided with
+arch_phys_memset().
+
+The development work to make U-Boot itself run in 64-bit mode has not yet
+been attempted. The best approach would likely be to build a 32-bit SPL
+image for U-Boot, with CONFIG_SPL_BUILD. This could then handle the early CPU
+init in 16-bit and 32-bit mode, running the FSP and any other binaries that
+are needed. Then it could change to 64-bit model and jump to U-Boot proper.
+
+Given U-Boot's extensive 64-bit support this has not been a high priority,
+but it would be a nice addition.
+
TODO List
---------
- Audio
- Chrome OS verified boot
+- Building U-Boot to run in 64-bit mode
References
----------