arm: dts: ti: k3-am64-main: Add RTI watchdog nodes

[platform/kernel/u-boot.git] / doc / README.nand

diff --git a/doc/README.nand b/doc/README.nand
index ec461b2..ffcea90 100644 (file)
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -175,11 +175,6 @@ Configuration Options:
       flexibility, so that one day we can eliminate the old mechanism.
 
 
-   CONFIG_SYS_NAND_ONFI_DETECTION
-       Enables detection of ONFI compliant devices during probe.
-       And fetching device parameters flashed on device, by parsing
-       ONFI parameter page.
-
 Platform specific options
 =========================
    CONFIG_NAND_OMAP_GPMC
@@ -205,72 +200,6 @@ Platform specific options
        so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
         SPL-NAND driver with software ECC correction support.
 
-   CONFIG_NAND_OMAP_ECCSCHEME
-       On OMAP platforms, this CONFIG specifies NAND ECC scheme.
-       It can take following values:
-       OMAP_ECC_HAM1_CODE_SW
-               1-bit Hamming code using software lib.
-               (for legacy devices only)
-       OMAP_ECC_HAM1_CODE_HW
-               1-bit Hamming code using GPMC hardware.
-               (for legacy devices only)
-       OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
-               4-bit BCH code (unsupported)
-       OMAP_ECC_BCH4_CODE_HW
-               4-bit BCH code (unsupported)
-       OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-               8-bit BCH code with
-               - ecc calculation using GPMC hardware engine,
-               - error detection using software library.
-               - requires CONFIG_BCH to enable software BCH library
-               (For legacy device which do not have ELM h/w engine)
-       OMAP_ECC_BCH8_CODE_HW
-               8-bit BCH code with
-               - ecc calculation using GPMC hardware engine,
-               - error detection using ELM hardware engine.
-       OMAP_ECC_BCH16_CODE_HW
-               16-bit BCH code with
-               - ecc calculation using GPMC hardware engine,
-               - error detection using ELM hardware engine.
-
-       How to select ECC scheme on OMAP and AMxx platforms ?
-       -----------------------------------------------------
-       Though higher ECC schemes have more capability to detect and correct
-       bit-flips, but still selection of ECC scheme is dependent on following
-       - hardware engines present in SoC.
-               Some legacy OMAP SoC do not have ELM h/w engine thus such
-               SoC cannot support BCHx_HW ECC schemes.
-       - size of OOB/Spare region
-               With higher ECC schemes, more OOB/Spare area is required to
-               store ECC. So choice of ECC scheme is limited by NAND oobsize.
-
-       In general following expression can help:
-               NAND_OOBSIZE >= 2 + (NAND_PAGESIZE / 512) * ECC_BYTES
-       where
-               NAND_OOBSIZE    = number of bytes available in
-                               OOB/spare area per NAND page.
-               NAND_PAGESIZE   = bytes in main-area of NAND page.
-               ECC_BYTES       = number of ECC bytes generated to
-                               protect 512 bytes of data, which is:
-                               3 for HAM1_xx ecc schemes
-                               7 for BCH4_xx ecc schemes
-                               14 for BCH8_xx ecc schemes
-                               26 for BCH16_xx ecc schemes
-
-               example to check for BCH16 on 2K page NAND
-               NAND_PAGESIZE = 2048
-               NAND_OOBSIZE = 64
-               2 + (2048 / 512) * 26 = 106 > NAND_OOBSIZE
-               Thus BCH16 cannot be supported on 2K page NAND.
-
-               However, for 4K pagesize NAND
-               NAND_PAGESIZE = 4096
-               NAND_OOBSIZE = 224
-               ECC_BYTES = 26
-               2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
-               Thus BCH16 can be supported on 4K page NAND.
-
-
     CONFIG_NAND_OMAP_GPMC_PREFETCH
        On OMAP platforms that use the GPMC controller
        (CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that