#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2007-03-29.01
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
Environment variables:
depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
+ tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
;;
esac
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
depmode=dashmstdout
fi
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
-fi
-
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
+## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
-## Some versions of gcc put a space before the ':'. On the theory
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
+## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
+ # the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
+ tr ' ' '
+' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
# The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
+ tr ' ' '
+' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ >> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
rm -f "$tmpdepfile"
;;
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
+ # current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
+ # Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
+ # `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
;;
icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
- # which is wrong. We want
+ # which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
+ # and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
+
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
+ # dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
done
test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
+ # Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
+ tr ' ' '
+' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no eat=no
- for arg
- do
+ cleared=no
+ for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
- if test $eat = yes; then
- eat=no
- continue
- fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
"$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
IFS=" "
for arg
do
case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
;;
esac
done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
none)
exec "$@"
;;
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
projects / platform / upstream / mpc.git / blobdiff