-/* -*- mode: C; c-file-style: "gnu" -*- */
+/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */
/* dbus-protocol.h D-Bus protocol constants
*
* Copyright (C) 2002, 2003 CodeFactory AB
+ * Copyright (C) 2004, 2005 Red Hat, Inc.
+ *
+ * Licensed under the Academic Free License version 2.1
*
- * Licensed under the Academic Free License version 1.2
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef __cplusplus
extern "C" {
+#if 0
+} /* avoids confusing emacs indentation */
+#endif
#endif
+/* Normally docs are in .c files, but there isn't a .c file for this. */
+/**
+ * @defgroup DBusProtocol Protocol constants
+ * @ingroup DBus
+ *
+ * @brief Defines constants which are part of the D-Bus protocol
+ *
+ * This header is intended for use by any library, not only libdbus.
+ *
+ * @{
+ */
+
+
/* Message byte order */
-#define DBUS_LITTLE_ENDIAN ('l') /* LSB first */
-#define DBUS_BIG_ENDIAN ('B') /* MSB first */
-
-/* Protocol version */
-#define DBUS_MAJOR_PROTOCOL_VERSION 0
-
-/* Data types */
-#define DBUS_TYPE_INVALID 0
-#define DBUS_TYPE_NIL 1
-#define DBUS_TYPE_INT32 2
-#define DBUS_TYPE_UINT32 3
-#define DBUS_TYPE_DOUBLE 4
-#define DBUS_TYPE_STRING 5
-#define DBUS_TYPE_INT32_ARRAY 6
-#define DBUS_TYPE_UINT32_ARRAY 7
-#define DBUS_TYPE_DOUBLE_ARRAY 8
-#define DBUS_TYPE_BYTE_ARRAY 9
-#define DBUS_TYPE_STRING_ARRAY 10
-
+#define DBUS_LITTLE_ENDIAN ('l') /**< Code marking LSB-first byte order in the wire protocol. */
+#define DBUS_BIG_ENDIAN ('B') /**< Code marking MSB-first byte order in the wire protocol. */
+
+/** Protocol version. */
+#define DBUS_MAJOR_PROTOCOL_VERSION 1
+
+/** Type code that is never equal to a legitimate type code */
+#define DBUS_TYPE_INVALID ((int) '\0')
+/** #DBUS_TYPE_INVALID as a string literal instead of a int literal */
+#define DBUS_TYPE_INVALID_AS_STRING "\0"
+
+/* Primitive types */
+/** Type code marking an 8-bit unsigned integer */
+#define DBUS_TYPE_BYTE ((int) 'y')
+/** #DBUS_TYPE_BYTE as a string literal instead of a int literal */
+#define DBUS_TYPE_BYTE_AS_STRING "y"
+/** Type code marking a boolean */
+#define DBUS_TYPE_BOOLEAN ((int) 'b')
+/** #DBUS_TYPE_BOOLEAN as a string literal instead of a int literal */
+#define DBUS_TYPE_BOOLEAN_AS_STRING "b"
+/** Type code marking a 16-bit signed integer */
+#define DBUS_TYPE_INT16 ((int) 'n')
+/** #DBUS_TYPE_INT16 as a string literal instead of a int literal */
+#define DBUS_TYPE_INT16_AS_STRING "n"
+/** Type code marking a 16-bit unsigned integer */
+#define DBUS_TYPE_UINT16 ((int) 'q')
+/** #DBUS_TYPE_UINT16 as a string literal instead of a int literal */
+#define DBUS_TYPE_UINT16_AS_STRING "q"
+/** Type code marking a 32-bit signed integer */
+#define DBUS_TYPE_INT32 ((int) 'i')
+/** #DBUS_TYPE_INT32 as a string literal instead of a int literal */
+#define DBUS_TYPE_INT32_AS_STRING "i"
+/** Type code marking a 32-bit unsigned integer */
+#define DBUS_TYPE_UINT32 ((int) 'u')
+/** #DBUS_TYPE_UINT32 as a string literal instead of a int literal */
+#define DBUS_TYPE_UINT32_AS_STRING "u"
+/** Type code marking a 64-bit signed integer */
+#define DBUS_TYPE_INT64 ((int) 'x')
+/** #DBUS_TYPE_INT64 as a string literal instead of a int literal */
+#define DBUS_TYPE_INT64_AS_STRING "x"
+/** Type code marking a 64-bit unsigned integer */
+#define DBUS_TYPE_UINT64 ((int) 't')
+/** #DBUS_TYPE_UINT64 as a string literal instead of a int literal */
+#define DBUS_TYPE_UINT64_AS_STRING "t"
+/** Type code marking an 8-byte double in IEEE 754 format */
+#define DBUS_TYPE_DOUBLE ((int) 'd')
+/** #DBUS_TYPE_DOUBLE as a string literal instead of a int literal */
+#define DBUS_TYPE_DOUBLE_AS_STRING "d"
+/** Type code marking a UTF-8 encoded, nul-terminated Unicode string */
+#define DBUS_TYPE_STRING ((int) 's')
+/** #DBUS_TYPE_STRING as a string literal instead of a int literal */
+#define DBUS_TYPE_STRING_AS_STRING "s"
+/** Type code marking a D-Bus object path */
+#define DBUS_TYPE_OBJECT_PATH ((int) 'o')
+/** #DBUS_TYPE_OBJECT_PATH as a string literal instead of a int literal */
+#define DBUS_TYPE_OBJECT_PATH_AS_STRING "o"
+/** Type code marking a D-Bus type signature */
+#define DBUS_TYPE_SIGNATURE ((int) 'g')
+/** #DBUS_TYPE_SIGNATURE as a string literal instead of a int literal */
+#define DBUS_TYPE_SIGNATURE_AS_STRING "g"
+/** Type code marking a unix file descriptor */
+#define DBUS_TYPE_UNIX_FD ((int) 'h')
+/** #DBUS_TYPE_UNIX_FD as a string literal instead of a int literal */
+#define DBUS_TYPE_UNIX_FD_AS_STRING "h"
+
+/* Compound types */
+/** Type code marking a D-Bus array type */
+#define DBUS_TYPE_ARRAY ((int) 'a')
+/** #DBUS_TYPE_ARRAY as a string literal instead of a int literal */
+#define DBUS_TYPE_ARRAY_AS_STRING "a"
+/** Type code marking a D-Bus variant type */
+#define DBUS_TYPE_VARIANT ((int) 'v')
+/** #DBUS_TYPE_VARIANT as a string literal instead of a int literal */
+#define DBUS_TYPE_VARIANT_AS_STRING "v"
+
+/** STRUCT and DICT_ENTRY are sort of special since their codes can't
+ * appear in a type string, instead
+ * DBUS_STRUCT_BEGIN_CHAR/DBUS_DICT_ENTRY_BEGIN_CHAR have to appear
+ */
+/** Type code used to represent a struct; however, this type code does not appear
+ * in type signatures, instead #DBUS_STRUCT_BEGIN_CHAR and #DBUS_STRUCT_END_CHAR will
+ * appear in a signature.
+ */
+#define DBUS_TYPE_STRUCT ((int) 'r')
+/** #DBUS_TYPE_STRUCT as a string literal instead of a int literal */
+#define DBUS_TYPE_STRUCT_AS_STRING "r"
+/** Type code used to represent a dict entry; however, this type code does not appear
+ * in type signatures, instead #DBUS_DICT_ENTRY_BEGIN_CHAR and #DBUS_DICT_ENTRY_END_CHAR will
+ * appear in a signature.
+ */
+#define DBUS_TYPE_DICT_ENTRY ((int) 'e')
+/** #DBUS_TYPE_DICT_ENTRY as a string literal instead of a int literal */
+#define DBUS_TYPE_DICT_ENTRY_AS_STRING "e"
+
+/** Does not include #DBUS_TYPE_INVALID, #DBUS_STRUCT_BEGIN_CHAR, #DBUS_STRUCT_END_CHAR,
+ * #DBUS_DICT_ENTRY_BEGIN_CHAR, or #DBUS_DICT_ENTRY_END_CHAR - i.e. it is the number of
+ * valid types, not the number of distinct characters that may appear in a type signature.
+ */
+#define DBUS_NUMBER_OF_TYPES (16)
+
+/* characters other than typecodes that appear in type signatures */
+
+/** Code marking the start of a struct type in a type signature */
+#define DBUS_STRUCT_BEGIN_CHAR ((int) '(')
+/** #DBUS_STRUCT_BEGIN_CHAR as a string literal instead of a int literal */
+#define DBUS_STRUCT_BEGIN_CHAR_AS_STRING "("
+/** Code marking the end of a struct type in a type signature */
+#define DBUS_STRUCT_END_CHAR ((int) ')')
+/** #DBUS_STRUCT_END_CHAR a string literal instead of a int literal */
+#define DBUS_STRUCT_END_CHAR_AS_STRING ")"
+/** Code marking the start of a dict entry type in a type signature */
+#define DBUS_DICT_ENTRY_BEGIN_CHAR ((int) '{')
+/** #DBUS_DICT_ENTRY_BEGIN_CHAR as a string literal instead of a int literal */
+#define DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING "{"
+/** Code marking the end of a dict entry type in a type signature */
+#define DBUS_DICT_ENTRY_END_CHAR ((int) '}')
+/** #DBUS_DICT_ENTRY_END_CHAR as a string literal instead of a int literal */
+#define DBUS_DICT_ENTRY_END_CHAR_AS_STRING "}"
+
+/** Max length in bytes of a bus name, interface, or member (not object
+ * path, paths are unlimited). This is limited because lots of stuff
+ * is O(n) in this number, plus it would be obnoxious to type in a
+ * paragraph-long method name so most likely something like that would
+ * be an exploit.
+ */
+#define DBUS_MAXIMUM_NAME_LENGTH 255
+
+/** This one is 255 so it fits in a byte */
+#define DBUS_MAXIMUM_SIGNATURE_LENGTH 255
+
+/** Max length of a match rule string; to keep people from hosing the
+ * daemon with some huge rule
+ */
+#define DBUS_MAXIMUM_MATCH_RULE_LENGTH 1024
+
+/** Max arg number you can match on in a match rule, e.g.
+ * arg0='hello' is OK, arg3489720987='hello' is not
+ */
+#define DBUS_MAXIMUM_MATCH_RULE_ARG_NUMBER 63
+
+/** Max length of a marshaled array in bytes (64M, 2^26) We use signed
+ * int for lengths so must be INT_MAX or less. We need something a
+ * bit smaller than INT_MAX because the array is inside a message with
+ * header info, etc. so an INT_MAX array wouldn't allow the message
+ * overhead. The 64M number is an attempt at a larger number than
+ * we'd reasonably ever use, but small enough that your bus would chew
+ * through it fairly quickly without locking up forever. If you have
+ * data that's likely to be larger than this, you should probably be
+ * sending it in multiple incremental messages anyhow.
+ */
+#define DBUS_MAXIMUM_ARRAY_LENGTH (67108864)
+/** Number of bits you need in an unsigned to store the max array size */
+#define DBUS_MAXIMUM_ARRAY_LENGTH_BITS 26
+
+/** The maximum total message size including header and body; similar
+ * rationale to max array size.
+ */
+#define DBUS_MAXIMUM_MESSAGE_LENGTH (DBUS_MAXIMUM_ARRAY_LENGTH * 2)
+/** Number of bits you need in an unsigned to store the max message size */
+#define DBUS_MAXIMUM_MESSAGE_LENGTH_BITS 27
+
+/** The maximum total number of unix fds in a message. Similar
+ * rationale as DBUS_MAXIMUM_MESSAGE_LENGTH. However we divide by four
+ * given that one fd is an int and hence at least 32 bits.
+ */
+#define DBUS_MAXIMUM_MESSAGE_UNIX_FDS (DBUS_MAXIMUM_MESSAGE_LENGTH/4)
+/** Number of bits you need in an unsigned to store the max message unix fds */
+#define DBUS_MAXIMUM_MESSAGE_UNIX_FDS_BITS (DBUS_MAXIMUM_MESSAGE_LENGTH_BITS-2)
+
+/** Depth of recursion in the type tree. This is automatically limited
+ * to DBUS_MAXIMUM_SIGNATURE_LENGTH since you could only have an array
+ * of array of array of ... that fit in the max signature. But that's
+ * probably a bit too large.
+ */
+#define DBUS_MAXIMUM_TYPE_RECURSION_DEPTH 32
+
+/* Types of message */
+
+/** This value is never a valid message type, see dbus_message_get_type() */
+#define DBUS_MESSAGE_TYPE_INVALID 0
+/** Message type of a method call message, see dbus_message_get_type() */
+#define DBUS_MESSAGE_TYPE_METHOD_CALL 1
+/** Message type of a method return message, see dbus_message_get_type() */
+#define DBUS_MESSAGE_TYPE_METHOD_RETURN 2
+/** Message type of an error reply message, see dbus_message_get_type() */
+#define DBUS_MESSAGE_TYPE_ERROR 3
+/** Message type of a signal message, see dbus_message_get_type() */
+#define DBUS_MESSAGE_TYPE_SIGNAL 4
+
+#define DBUS_NUM_MESSAGE_TYPES 5
+
/* Header flags */
-#define DBUS_HEADER_FLAG_ERROR 0x1
-
+
+/** If set, this flag means that the sender of a message does not care about getting
+ * a reply, so the recipient need not send one. See dbus_message_set_no_reply().
+ */
+#define DBUS_HEADER_FLAG_NO_REPLY_EXPECTED 0x1
+/**
+ * If set, this flag means that even if the message bus knows how to start an owner for
+ * the destination bus name (see dbus_message_set_destination()), it should not
+ * do so. If this flag is not set, the bus may launch a program to process the
+ * message.
+ */
+#define DBUS_HEADER_FLAG_NO_AUTO_START 0x2
+
/* Header fields */
-#define DBUS_HEADER_FIELD_NAME "name"
-#define DBUS_HEADER_FIELD_SERVICE "srvc"
-#define DBUS_HEADER_FIELD_REPLY "rply"
-#define DBUS_HEADER_FIELD_SENDER "sndr"
-
-/* Services */
-#define DBUS_SERVICE_DBUS "org.freedesktop.DBus"
-#define DBUS_SERVICE_BROADCAST "org.freedesktop.DBus.Broadcast"
-
-/* Service owner flags */
-#define DBUS_SERVICE_FLAG_PROHIBIT_REPLACEMENT 0x1
-#define DBUS_SERVICE_FLAG_REPLACE_EXISTING 0x2
-
-/* Service replies */
-#define DBUS_SERVICE_REPLY_PRIMARY_OWNER 0x1
-#define DBUS_SERVICE_REPLY_IN_QUEUE 0x2
-#define DBUS_SERVICE_REPLY_SERVICE_EXISTS 0x4
-#define DBUS_SERVICE_REPLY_ALREADY_OWNER 0x8
-
-/* Messages */
-#define DBUS_MESSAGE_SERVICE_EXISTS "org.freedesktop.DBus.ServiceExists"
-#define DBUS_MESSAGE_HELLO "org.freedesktop.DBus.Hello"
-#define DBUS_MESSAGE_LIST_SERVICES "org.freedesktop.DBus.ListServices"
-#define DBUS_MESSAGE_ACQUIRE_SERVICE "org.freedesktop.DBus.OwnService"
-#define DBUS_MESSAGE_SERVICE_ACQUIRED "org.freedesktop.DBus.ServiceAcquired"
-#define DBUS_MESSAGE_SERVICE_CREATED "org.freedesktop.DBus.ServiceCreated"
-#define DBUS_MESSAGE_SERVICE_DELETED "org.freedesktop.DBus.ServiceDeleted"
-#define DBUS_MESSAGE_SERVICE_LOST "org.freedesktop.DBus.ServiceLost"
-
-
+
+/** Not equal to any valid header field code */
+#define DBUS_HEADER_FIELD_INVALID 0
+/** Header field code for the path - the path is the object emitting a signal or the object receiving a method call.
+ * See dbus_message_set_path().
+ */
+#define DBUS_HEADER_FIELD_PATH 1
+/** Header field code for the interface containing a member (method or signal).
+ * See dbus_message_set_interface().
+ */
+#define DBUS_HEADER_FIELD_INTERFACE 2
+/** Header field code for a member (method or signal). See dbus_message_set_member(). */
+#define DBUS_HEADER_FIELD_MEMBER 3
+/** Header field code for an error name (found in #DBUS_MESSAGE_TYPE_ERROR messages).
+ * See dbus_message_set_error_name().
+ */
+#define DBUS_HEADER_FIELD_ERROR_NAME 4
+/** Header field code for a reply serial, used to match a #DBUS_MESSAGE_TYPE_METHOD_RETURN message with the
+ * message that it's a reply to. See dbus_message_set_reply_serial().
+ */
+#define DBUS_HEADER_FIELD_REPLY_SERIAL 5
+/**
+ * Header field code for the destination bus name of a message. See dbus_message_set_destination().
+ */
+#define DBUS_HEADER_FIELD_DESTINATION 6
+/**
+ * Header field code for the sender of a message; usually initialized by the message bus.
+ * See dbus_message_set_sender().
+ */
+#define DBUS_HEADER_FIELD_SENDER 7
+/**
+ * Header field code for the type signature of a message.
+ */
+#define DBUS_HEADER_FIELD_SIGNATURE 8
+/**
+ * Header field code for the number of unix file descriptors associated
+ * with this message.
+ */
+#define DBUS_HEADER_FIELD_UNIX_FDS 9
+
+
+/**
+ * Value of the highest-numbered header field code, can be used to determine
+ * the size of an array indexed by header field code. Remember though
+ * that unknown codes must be ignored, so check for that before
+ * indexing the array.
+ */
+#define DBUS_HEADER_FIELD_LAST DBUS_HEADER_FIELD_UNIX_FDS
+
+/** Header format is defined as a signature:
+ * byte byte order
+ * byte message type ID
+ * byte flags
+ * byte protocol version
+ * uint32 body length
+ * uint32 serial
+ * array of struct (byte,variant) (field name, value)
+ *
+ * The length of the header can be computed as the
+ * fixed size of the initial data, plus the length of
+ * the array at the end, plus padding to an 8-boundary.
+ */
+#define DBUS_HEADER_SIGNATURE \
+ DBUS_TYPE_BYTE_AS_STRING \
+ DBUS_TYPE_BYTE_AS_STRING \
+ DBUS_TYPE_BYTE_AS_STRING \
+ DBUS_TYPE_BYTE_AS_STRING \
+ DBUS_TYPE_UINT32_AS_STRING \
+ DBUS_TYPE_UINT32_AS_STRING \
+ DBUS_TYPE_ARRAY_AS_STRING \
+ DBUS_STRUCT_BEGIN_CHAR_AS_STRING \
+ DBUS_TYPE_BYTE_AS_STRING \
+ DBUS_TYPE_VARIANT_AS_STRING \
+ DBUS_STRUCT_END_CHAR_AS_STRING
+
+
+/**
+ * The smallest header size that can occur. (It won't be valid due to
+ * missing required header fields.) This is 4 bytes, two uint32, an
+ * array length. This isn't any kind of resource limit, just the
+ * necessary/logical outcome of the header signature.
+ */
+#define DBUS_MINIMUM_HEADER_SIZE 16
+
+/* Errors */
+/* WARNING these get autoconverted to an enum in dbus-glib.h. Thus,
+ * if you change the order it breaks the ABI. Keep them in order.
+ * Also, don't change the formatting since that will break the sed
+ * script.
+ */
+/** A generic error; "something went wrong" - see the error message for more. */
+#define DBUS_ERROR_FAILED "org.freedesktop.DBus.Error.Failed"
+/** There was not enough memory to complete an operation. */
+#define DBUS_ERROR_NO_MEMORY "org.freedesktop.DBus.Error.NoMemory"
+/** The bus doesn't know how to launch a service to supply the bus name you wanted. */
+#define DBUS_ERROR_SERVICE_UNKNOWN "org.freedesktop.DBus.Error.ServiceUnknown"
+/** The bus name you referenced doesn't exist (i.e. no application owns it). */
+#define DBUS_ERROR_NAME_HAS_NO_OWNER "org.freedesktop.DBus.Error.NameHasNoOwner"
+/** No reply to a message expecting one, usually means a timeout occurred. */
+#define DBUS_ERROR_NO_REPLY "org.freedesktop.DBus.Error.NoReply"
+/** Something went wrong reading or writing to a socket, for example. */
+#define DBUS_ERROR_IO_ERROR "org.freedesktop.DBus.Error.IOError"
+/** A D-Bus bus address was malformed. */
+#define DBUS_ERROR_BAD_ADDRESS "org.freedesktop.DBus.Error.BadAddress"
+/** Requested operation isn't supported (like ENOSYS on UNIX). */
+#define DBUS_ERROR_NOT_SUPPORTED "org.freedesktop.DBus.Error.NotSupported"
+/** Some limited resource is exhausted. */
+#define DBUS_ERROR_LIMITS_EXCEEDED "org.freedesktop.DBus.Error.LimitsExceeded"
+/** Security restrictions don't allow doing what you're trying to do. */
+#define DBUS_ERROR_ACCESS_DENIED "org.freedesktop.DBus.Error.AccessDenied"
+/** Authentication didn't work. */
+#define DBUS_ERROR_AUTH_FAILED "org.freedesktop.DBus.Error.AuthFailed"
+/** Unable to connect to server (probably caused by ECONNREFUSED on a socket). */
+#define DBUS_ERROR_NO_SERVER "org.freedesktop.DBus.Error.NoServer"
+/** Certain timeout errors, possibly ETIMEDOUT on a socket.
+ * Note that #DBUS_ERROR_NO_REPLY is used for message reply timeouts.
+ * @warning this is confusingly-named given that #DBUS_ERROR_TIMED_OUT also exists. We can't fix
+ * it for compatibility reasons so just be careful.
+ */
+#define DBUS_ERROR_TIMEOUT "org.freedesktop.DBus.Error.Timeout"
+/** No network access (probably ENETUNREACH on a socket). */
+#define DBUS_ERROR_NO_NETWORK "org.freedesktop.DBus.Error.NoNetwork"
+/** Can't bind a socket since its address is in use (i.e. EADDRINUSE). */
+#define DBUS_ERROR_ADDRESS_IN_USE "org.freedesktop.DBus.Error.AddressInUse"
+/** The connection is disconnected and you're trying to use it. */
+#define DBUS_ERROR_DISCONNECTED "org.freedesktop.DBus.Error.Disconnected"
+/** Invalid arguments passed to a method call. */
+#define DBUS_ERROR_INVALID_ARGS "org.freedesktop.DBus.Error.InvalidArgs"
+/** Missing file. */
+#define DBUS_ERROR_FILE_NOT_FOUND "org.freedesktop.DBus.Error.FileNotFound"
+/** Existing file and the operation you're using does not silently overwrite. */
+#define DBUS_ERROR_FILE_EXISTS "org.freedesktop.DBus.Error.FileExists"
+/** Method name you invoked isn't known by the object you invoked it on. */
+#define DBUS_ERROR_UNKNOWN_METHOD "org.freedesktop.DBus.Error.UnknownMethod"
+/** Object you invoked a method on isn't known. */
+#define DBUS_ERROR_UNKNOWN_OBJECT "org.freedesktop.DBus.Error.UnknownObject"
+/** Interface you invoked a method on isn't known by the object. */
+#define DBUS_ERROR_UNKNOWN_INTERFACE "org.freedesktop.DBus.Error.UnknownInterface"
+/** Property you tried to access isn't known by the object. */
+#define DBUS_ERROR_UNKNOWN_PROPERTY "org.freedesktop.DBus.Error.UnknownProperty"
+/** Property you tried to set is read-only. */
+#define DBUS_ERROR_PROPERTY_READ_ONLY "org.freedesktop.DBus.Error.PropertyReadOnly"
+/** Certain timeout errors, e.g. while starting a service.
+ * @warning this is confusingly-named given that #DBUS_ERROR_TIMEOUT also exists. We can't fix
+ * it for compatibility reasons so just be careful.
+ */
+#define DBUS_ERROR_TIMED_OUT "org.freedesktop.DBus.Error.TimedOut"
+/** Tried to remove or modify a match rule that didn't exist. */
+#define DBUS_ERROR_MATCH_RULE_NOT_FOUND "org.freedesktop.DBus.Error.MatchRuleNotFound"
+/** The match rule isn't syntactically valid. */
+#define DBUS_ERROR_MATCH_RULE_INVALID "org.freedesktop.DBus.Error.MatchRuleInvalid"
+/** While starting a new process, the exec() call failed. */
+#define DBUS_ERROR_SPAWN_EXEC_FAILED "org.freedesktop.DBus.Error.Spawn.ExecFailed"
+/** While starting a new process, the fork() call failed. */
+#define DBUS_ERROR_SPAWN_FORK_FAILED "org.freedesktop.DBus.Error.Spawn.ForkFailed"
+/** While starting a new process, the child exited with a status code. */
+#define DBUS_ERROR_SPAWN_CHILD_EXITED "org.freedesktop.DBus.Error.Spawn.ChildExited"
+/** While starting a new process, the child exited on a signal. */
+#define DBUS_ERROR_SPAWN_CHILD_SIGNALED "org.freedesktop.DBus.Error.Spawn.ChildSignaled"
+/** While starting a new process, something went wrong. */
+#define DBUS_ERROR_SPAWN_FAILED "org.freedesktop.DBus.Error.Spawn.Failed"
+/** We failed to setup the environment correctly. */
+#define DBUS_ERROR_SPAWN_SETUP_FAILED "org.freedesktop.DBus.Error.Spawn.FailedToSetup"
+/** We failed to setup the config parser correctly. */
+#define DBUS_ERROR_SPAWN_CONFIG_INVALID "org.freedesktop.DBus.Error.Spawn.ConfigInvalid"
+/** Bus name was not valid. */
+#define DBUS_ERROR_SPAWN_SERVICE_INVALID "org.freedesktop.DBus.Error.Spawn.ServiceNotValid"
+/** Service file not found in system-services directory. */
+#define DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND "org.freedesktop.DBus.Error.Spawn.ServiceNotFound"
+/** Permissions are incorrect on the setuid helper. */
+#define DBUS_ERROR_SPAWN_PERMISSIONS_INVALID "org.freedesktop.DBus.Error.Spawn.PermissionsInvalid"
+/** Service file invalid (Name, User or Exec missing). */
+#define DBUS_ERROR_SPAWN_FILE_INVALID "org.freedesktop.DBus.Error.Spawn.FileInvalid"
+/** Tried to get a UNIX process ID and it wasn't available. */
+#define DBUS_ERROR_SPAWN_NO_MEMORY "org.freedesktop.DBus.Error.Spawn.NoMemory"
+/** Tried to get a UNIX process ID and it wasn't available. */
+#define DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN "org.freedesktop.DBus.Error.UnixProcessIdUnknown"
+/** A type signature is not valid. */
+#define DBUS_ERROR_INVALID_SIGNATURE "org.freedesktop.DBus.Error.InvalidSignature"
+/** A file contains invalid syntax or is otherwise broken. */
+#define DBUS_ERROR_INVALID_FILE_CONTENT "org.freedesktop.DBus.Error.InvalidFileContent"
+/** Asked for SELinux security context and it wasn't available. */
+#define DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN "org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown"
+/** Asked for ADT audit data and it wasn't available. */
+#define DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN "org.freedesktop.DBus.Error.AdtAuditDataUnknown"
+/** There's already an object with the requested object path. */
+#define DBUS_ERROR_OBJECT_PATH_IN_USE "org.freedesktop.DBus.Error.ObjectPathInUse"
+/** The message meta data does not match the payload. e.g. expected
+ number of file descriptors were not sent over the socket this message was received on. */
+#define DBUS_ERROR_INCONSISTENT_MESSAGE "org.freedesktop.DBus.Error.InconsistentMessage"
+
+/* XML introspection format */
+
+/** XML namespace of the introspection format version 1.0 */
+#define DBUS_INTROSPECT_1_0_XML_NAMESPACE "http://www.freedesktop.org/standards/dbus"
+/** XML public identifier of the introspection format version 1.0 */
+#define DBUS_INTROSPECT_1_0_XML_PUBLIC_IDENTIFIER "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
+/** XML system identifier of the introspection format version 1.0 */
+#define DBUS_INTROSPECT_1_0_XML_SYSTEM_IDENTIFIER "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd"
+/** XML document type declaration of the introspection format version 1.0 */
+#define DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE "<!DOCTYPE node PUBLIC \"" DBUS_INTROSPECT_1_0_XML_PUBLIC_IDENTIFIER "\"\n\"" DBUS_INTROSPECT_1_0_XML_SYSTEM_IDENTIFIER "\">\n"
+
+/** @} */
+
#ifdef __cplusplus
+#if 0
+{ /* avoids confusing emacs indentation */
+#endif
}
#endif
projects / platform / upstream / dbus.git / blobdiff