#include <ppc4xx.h>
#include <asm/processor.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#define ONE_BILLION 1000000000
-
+#ifdef DEBUG
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
}
- sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
- sysInfo->freqProcessor = (sysInfo->freqVCOMhz * 1000000) / sysInfo->pllFwdDiv;
- sysInfo->freqPLB = (sysInfo->freqVCOMhz * 1000000) /
- (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
} else {
/*
* Check pllFwdDiv to see if running in bypass mode where the CPU speed
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
} else {
- sysInfo->freqVCOMhz = ( 1000000 *
- sysInfo->pllFwdDiv *
- sysInfo->pllFbkDiv *
- sysInfo->pllPlbDiv
- ) / sysClkPeriodPs;
- if (sysInfo->freqVCOMhz >= VCO_MIN
- && sysInfo->freqVCOMhz <= VCO_MAX) {
- sysInfo->freqPLB = (ONE_BILLION /
- ((sysClkPeriodPs * 10) /
- sysInfo->pllFbkDiv)) * 10000;
- sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
- } else {
- printf ("\nInvalid VCO frequency calculated : %ld MHz \a\n",
- sysInfo->freqVCOMhz);
- printf ("It must be between %d-%d MHz \a\n",
- VCO_MIN, VCO_MAX);
- printf ("PLL Mode reg : %8.8lx\a\n",
- pllmr);
- hang ();
- }
+ sysInfo->freqVCOHz = ( 1000000000000LL *
+ (unsigned long long)sysInfo->pllFwdDiv *
+ (unsigned long long)sysInfo->pllFbkDiv *
+ (unsigned long long)sysInfo->pllPlbDiv
+ ) / (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
+ sysInfo->pllFbkDiv)) * 10000;
+ sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
}
}
}
#elif defined(CONFIG_440)
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+void get_sys_info (sys_info_t *sysInfo)
+{
+ unsigned long temp;
+ unsigned long reg;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+ /*
+ WARNING: ASSUMES the following:
+ ENG=1
+ PRADV0=1
+ PRBDV0=1
+ */
+
+ /* Decode CPR0_PLLD0 for divisors */
+ mfclk(clk_plld, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ sysInfo->pllFwdDivA = temp ? temp : 16;
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ lfdiv = reg & PLLD_LFBDV_MASK;
+
+ mfclk(clk_opbd, reg);
+ temp = (reg & OPBDDV_MASK) >> 24;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ mfclk(clk_perd, reg);
+ temp = (reg & PERDV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+ mfclk(clk_primbd, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+
+ mfclk(clk_spcid, reg);
+ temp = (reg & SPCID_MASK) >> 24;
+ sysInfo->pllPciDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfsdr(sdr_sdstp0, reg);
+ temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ mfclk(clk_pllc, reg);
+ temp = (reg & PLLC_SRC_MASK) >> 29;
+ if (!temp) /* PLLOUTA */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else /* PLLOUTB */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+
+ /* Figure which timer source to use */
+ if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
+ if (CONFIG_SYS_CLK_FREQ > temp)
+ sysInfo->freqTmrClk = temp;
+ else
+ sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+ }
+ else /* Internal clock */
+ sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ sys_info_t sys_info;
+ get_sys_info (&sys_info);
+ return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
+ if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+ sysInfo->freqPLB >>= 1;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
}
+#else
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long temp1;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+
+#if defined(CONFIG_YUCCA)
+ unsigned long sys_freq;
+ unsigned long sys_per=0;
+ unsigned long msr;
+ unsigned long pci_clock_per;
+ unsigned long sdr_ddrpll;
+
+ /*-------------------------------------------------------------------------+
+ | Get the system clock period.
+ +-------------------------------------------------------------------------*/
+ sys_per = determine_sysper();
+
+ msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
+
+ /*-------------------------------------------------------------------------+
+ | Calculate the system clock speed from the period.
+ +-------------------------------------------------------------------------*/
+ sys_freq = (ONE_BILLION / sys_per) * 1000;
+#endif
+
+ /* Extract configured divisors */
+ mfsdr( sdr_sdstp0,strp0 );
+ mfsdr( sdr_sdstp1,strp1 );
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
+ sysInfo->pllFwdDivA = temp ? temp : 16 ;
+ temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+ temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+ prbdv0 = (strp0 >> 2) & 0x7;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
+ lfdiv = temp1 ? temp1 : 64;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
+ if (!temp)
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+#if defined(CONFIG_YUCCA)
+ sysInfo->freqVCOMhz = (m * sys_freq) ;
+#else
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
+#endif
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+
+#if defined(CONFIG_YUCCA)
+ /* Determine PCI Clock Period */
+ pci_clock_per = determine_pci_clock_per();
+ sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
+ mfsdr(sdr_ddr0, sdr_ddrpll);
+ sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+#endif
+
+
+}
+
+#endif
+
+#if defined(CONFIG_YUCCA)
+unsigned long determine_sysper(void)
+{
+ unsigned int fpga_clocking_reg;
+ unsigned int master_clock_selection;
+ unsigned long master_clock_per = 0;
+ unsigned long fb_div_selection;
+ unsigned int vco_div_reg_value;
+ unsigned long vco_div_selection;
+ unsigned long sys_per = 0;
+ int extClkVal;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 0 and reg 1 to get FPGA reg information
+ +-------------------------------------------------------------------------*/
+ fpga_clocking_reg = in16(FPGA_REG16);
+
+
+ /* Determine Master Clock Source Selection */
+ master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
+
+ switch(master_clock_selection) {
+ case FPGA_REG16_MASTER_CLK_66_66:
+ master_clock_per = PERIOD_66_66MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_50:
+ master_clock_per = PERIOD_50_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_33_33:
+ master_clock_per = PERIOD_33_33MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_25:
+ master_clock_per = PERIOD_25_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_EXT:
+ if ((extClkVal==EXTCLK_33_33)
+ && (extClkVal==EXTCLK_50)
+ && (extClkVal==EXTCLK_66_66)
+ && (extClkVal==EXTCLK_83)) {
+ /* calculate master clock period from external clock value */
+ master_clock_per=(ONE_BILLION/extClkVal) * 1000;
+ } else {
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ break;
+ default:
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ break;
+ }
+
+ /* Determine FB divisors values */
+ if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_6;
+ else
+ fb_div_selection = FPGA_FB_DIV_12;
+ } else {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_10;
+ else
+ fb_div_selection = FPGA_FB_DIV_20;
+ }
+
+ /* Determine VCO divisors values */
+ vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
+
+ switch(vco_div_reg_value) {
+ case FPGA_REG16_VCO_DIV_4:
+ vco_div_selection = FPGA_VCO_DIV_4;
+ break;
+ case FPGA_REG16_VCO_DIV_6:
+ vco_div_selection = FPGA_VCO_DIV_6;
+ break;
+ case FPGA_REG16_VCO_DIV_8:
+ vco_div_selection = FPGA_VCO_DIV_8;
+ break;
+ case FPGA_REG16_VCO_DIV_10:
+ default:
+ vco_div_selection = FPGA_VCO_DIV_10;
+ break;
+ }
+
+ if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
+ switch(master_clock_per) {
+ case PERIOD_25_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_33_33MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_50_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_50_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_75_00MHZ;
+ }
+ break;
+ case PERIOD_66_66MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_66_66MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_100_00MHZ;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sys_per == 0) {
+ /* Other combinations are not supported */
+ DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ } else {
+ /* calcul system clock without cheking */
+ /* if engineering option clock no check is selected */
+ /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
+ sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
+ }
+
+ return(sys_per);
+}
+
+/*-------------------------------------------------------------------------+
+| determine_pci_clock_per.
++-------------------------------------------------------------------------*/
+unsigned long determine_pci_clock_per(void)
+{
+ unsigned long pci_clock_selection, pci_period;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 6 to get PCI 0 FPGA reg information
+ +-------------------------------------------------------------------------*/
+ pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
+
+
+ pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
+
+ switch (pci_clock_selection) {
+ case FPGA_REG16_PCI0_CLK_133_33:
+ pci_period = PERIOD_133_33MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_100:
+ pci_period = PERIOD_100_00MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_66_66:
+ pci_period = PERIOD_66_66MHZ;
+ break;
+ default:
+ pci_period = PERIOD_33_33MHZ;;
+ break;
+ }
+
+ return(pci_period);
+}
+#endif
ulong get_OPB_freq (void)
{
return sys_info.freqOPB;
}
+#elif defined(CONFIG_XILINX_ML300)
+extern void get_sys_info (sys_info_t * sysInfo);
+extern ulong get_PCI_freq (void);
+
+#elif defined(CONFIG_AP1000)
+void get_sys_info (sys_info_t * sysInfo) {
+ sysInfo->freqProcessor = 240 * 1000 * 1000;
+ sysInfo->freqPLB = 80 * 1000 * 1000;
+ sysInfo->freqPCI = 33 * 1000 * 1000;
+}
+
#elif defined(CONFIG_405)
void get_sys_info (sys_info_t * sysInfo) {
/*
* Determine VCO clock frequency
*/
- sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
/*
* Determine CPU clock frequency
*/
pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
if (pllmr1 & PLLMR1_SSCS_MASK) {
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
- / pllmr0_ccdv;
+ /*
+ * This is true if FWDVA == FWDVB:
+ * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
+ * / pllmr0_ccdv;
+ */
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
+ / sysInfo->pllFwdDiv / pllmr0_ccdv;
} else {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
}
* Determine PLB clock frequency
*/
sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
- if (!((sysInfo->freqVCOMhz >= VCO_MIN) && (sysInfo->freqVCOMhz <= VCO_MAX))) {
- printf ("\nInvalid VCO frequency calculated : %ld MHz \a\n",
- sysInfo->freqVCOMhz);
- printf ("It must be between %d-%d MHz \a\n", VCO_MIN, VCO_MAX);
- printf ("PLL Mode reg 0 : %8.8lx\a\n", pllmr0);
- printf ("PLL Mode reg 1 : %8.8lx\a\n", pllmr1);
- hang ();
- }
}
return val;
}
+#elif defined(CONFIG_405EZ)
+void get_sys_info (PPC405_SYS_INFO * sysInfo)
+{
+ unsigned long cpr_plld;
+ unsigned long cpr_pllc;
+ unsigned long cpr_primad;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
+ unsigned long primad_cpudv;
+ unsigned long m;
+
+ /*
+ * Read PLL Mode registers
+ */
+ mfcpr(cprplld, cpr_plld);
+ mfcpr(cprpllc, cpr_pllc);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B
+ */
+ sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+ if (sysInfo->pllFwdDivB == 0)
+ sysInfo->pllFwdDivB = 8;
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+ if (sysInfo->pllFbkDiv == 0)
+ sysInfo->pllFbkDiv = 256;
+
+ /*
+ * Read CPR_PRIMAD register
+ */
+ mfcpr(cprprimad, cpr_primad);
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+ if (sysInfo->pllPlbDiv == 0)
+ sysInfo->pllPlbDiv = 16;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+ if (sysInfo->pllExtBusDiv == 0)
+ sysInfo->pllExtBusDiv = 16;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+ if (sysInfo->pllOpbDiv == 0)
+ sysInfo->pllOpbDiv = 16;
+
+ /*
+ * Determine the M factor
+ */
+ if (cpr_pllc & PLLC_SRC_MASK)
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+ if (primad_cpudv == 0)
+ primad_cpudv = 16;
+
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / primad_cpudv;
+
+ /*
+ * Determine PLB clock frequency
+ */
+ sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
+}
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+ ulong val = 0;
+
+ PPC405_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+ val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv;
+
+ return val;
+}
+
#endif
int get_clocks (void)
{
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
- DECLARE_GLOBAL_DATA_PTR;
-
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_440) || defined(CONFIG_405)
sys_info_t sys_info;
get_sys_info (&sys_info);
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
#ifdef CONFIG_IOP480
- DECLARE_GLOBAL_DATA_PTR;
-
gd->cpu_clk = 66000000;
gd->bus_clk = 66000000;
#endif
{
ulong val;
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_440) || defined(CONFIG_405)
sys_info_t sys_info;
get_sys_info (&sys_info);
projects / platform / kernel / u-boot.git / blobdiff