/*
- * Copyright 2005 Freescale Semiconductor.
+ * Copyright (C) Freescale Semiconductor,Inc.
+ * 2005, 2006. All rights reserved.
+ *
* Ed Swarthout (ed.swarthout@freescale.com)
+ * Jason Jin (Jason.jin@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*/
/*
- * PEX Configuration space access support for MPC85xx PEX Bridge
+ * PCIE Configuration space access support for PCIE Bridge
*/
#include <common.h>
#include <pci.h>
-
#if defined(CONFIG_PCI)
-
void
pci_mpc86xx_init(struct pci_controller *hose)
{
- volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
- volatile ccsr_pex_t *pex1 = &immap->im_pex1;
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_pex_t *pcie1 = &immap->im_pex1;
+ u16 temp16;
+ u32 temp32;
+
volatile ccsr_gur_t *gur = &immap->im_gur;
uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pex1_host = (host1_agent == 2) || (host1_agent == 3);
-
- u16 reg16, reg16_1, reg16_2, reg16_3;
- u32 reg32, i;
-
- ulong addr, data;
-
-
- uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
-
- if ((io_sel==2 || io_sel==3 || io_sel==5 || io_sel==6 || io_sel==7 || io_sel==0xF ) && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){
- printf ("PCI-EXPRESS 1: Configured as %s \n",
- pex1_agent ? "Agent" : "Host");
- printf (" Scanning PCI bus");
- debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det);
- if (pex1->pme_msg_det) {
- pex1->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pex1->pme_msg_det);
- }
- debug ("\n");
- }
-
-
- hose->first_busno = 0;
- hose->last_busno = 0x7f;
+ uint pcie1_host = (host1_agent == 2) || (host1_agent == 3);
+ uint pcie1_agent = (host1_agent == 0) || (host1_agent == 1);
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+
+ if ((io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 6 ||
+ io_sel == 7 || io_sel == 0xf)
+ && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+ printf("PCI-EXPRESS 1: Configured as %s \n",
+ pcie1_agent ? "Agent" : "Host");
+ if (pcie1_agent)
+ return; /*Don't scan bus when configured as agent */
+ printf(" Scanning PCIE bus");
+ debug("0x%08x=0x%08x ",
+ &pcie1->pme_msg_det,
+ pcie1->pme_msg_det);
+ if (pcie1->pme_msg_det) {
+ pcie1->pme_msg_det = 0xffffffff;
+ debug(" with errors. Clearing. Now 0x%08x",
+ pcie1->pme_msg_det);
+ }
+ debug("\n");
+ } else {
+ printf("PCI-EXPRESS 1 disabled!\n");
+ return;
+ }
+
+ /*
+ * Set first_bus=0 only skipped B0:D0:F0 which is
+ * a reserved device in M1575, but make it easy for
+ * most of the scan process.
+ */
+ hose->first_busno = 0x00;
+ hose->last_busno = 0xfe;
+
+ pcie_setup_indirect(hose, (CFG_IMMR + 0x8000), (CFG_IMMR + 0x8004));
+
+ pci_hose_read_config_word(hose,
+ PCI_BDF(0, 0, 0), PCI_COMMAND, &temp16);
+ temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+ pci_hose_write_config_word(hose,
+ PCI_BDF(0, 0, 0), PCI_COMMAND, temp16);
+
+ pci_hose_write_config_word(hose, PCI_BDF(0, 0, 0), PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose,
+ PCI_BDF(0, 0, 0), PCI_LATENCY_TIMER, 0x80);
+
+ pci_hose_read_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
+ &temp32);
+ temp32 = (temp32 & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
+ pci_hose_write_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
+ temp32);
+
+ pcie1->powar1 = 0;
+ pcie1->powar2 = 0;
+ pcie1->piwar1 = 0;
+ pcie1->piwar1 = 0;
+
+ pcie1->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+ pcie1->powar1 = 0x8004401c; /* 512M MEM space */
+ pcie1->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+ pcie1->potear1 = 0x00000000;
+
+ pcie1->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+ pcie1->powar2 = 0x80088017; /* 16M IO space */
+ pcie1->potar2 = 0x00000000;
+ pcie1->potear2 = 0x00000000;
+
+ pcie1->pitar1 = 0x00000000;
+ pcie1->piwbar1 = 0x00000000;
+ /* Enable, Prefetch, Local Mem, * Snoop R/W, 2G */
+ pcie1->piwar1 = 0xa0f5501e;
pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ pci_set_region(hose->regions + 1,
CFG_PCI1_MEM_BASE,
CFG_PCI1_MEM_PHYS,
CFG_PCI1_MEM_SIZE,
PCI_REGION_MEM);
- pci_set_region(hose->regions + 1,
+ pci_set_region(hose->regions + 2,
CFG_PCI1_IO_BASE,
CFG_PCI1_IO_PHYS,
CFG_PCI1_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 2;
+ hose->region_count = 3;
- pci_setup_indirect(hose,
- (CFG_IMMR+0x8000),
- (CFG_IMMR+0x8004));
-
- /*
- * Hose scan.
- */
pci_register_hose(hose);
- //#define MPC8548_REV1_PEX12_ERRATA
-#ifdef MPC8548_REV1_PEX12_ERRATA
- /* can only read/write 4 bytes */
- pci_read_config_dword (PCI_BDF(0,0,0), PCI_VENDOR_ID, ®32);
- printf("pex_mpc85xx_init: pex cr %2x %8x\n",PCI_VENDOR_ID, reg32);
-
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®32);
- reg32 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg32);
-#else
- pci_read_config_word (PCI_BDF(0,0,0), PCI_VENDOR_ID, ®16);
- debug("pex_mpc86xx_init: read %2x %4x\n",PCI_VENDOR_ID, reg16);
- pci_read_config_word (PCI_BDF(0,0,0), PCI_DEVICE_ID, ®16);
- debug("pex_mpc86xx_init: read %2x %4x\n",PCI_DEVICE_ID, reg16);
-
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
-
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
- debug("pex_mpc86xx_init: read %2x %4x\n",PCI_COMMAND, reg16);
-
-
-#endif
-
- /*
- * Clear non-reserved bits in status register.
- */
- // pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
- // pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
-
- pex1->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
- pex1->powar1 = 0x8004401c; /* 512M MEM space */
- pex1->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
- pex1->potear1 = 0x00000000;
-
- pex1->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
- pex1->powar2 = 0x80088017; /* 16M IO space */
- pex1->potar2 = 0x00000000;
- pex1->potear2 = 0x00000000;
-
-
- if (!pex1->piwar1) {
- pex1->pitar1 = 0x00000000;
- pex1->piwbar1 = (0x80000000 >> 12 ) & 0x000fffff;
- pex1->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local Mem,
- * Snoop R/W, 2G */
- }
-
- pex1->pitar2 = 0x00000000;
- pex1->piwbar2 = (0xe2000000 >> 12 ) & 0x000fffff;
- pex1->piwar2 = 0xa0f5501e; /* Enable, Prefetch, Local Mem,
-
-
-
-/* if (pex1_host) { */
-/* #ifdef MPC8548_REV1_PEX12_ERRATA */
-/* pci_write_config_dword (PCI_BDF(0,0,0), 0x18, 0x00ff0100); */
-/* #else */
-
-
-
- *(u32 *)(0xf8008000)= 0x80000000;
- debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
-
- pci_write_config_byte(PCI_BDF(0,0,0), PCI_PRIMARY_BUS,0x20);
- pci_write_config_byte(PCI_BDF(0,0,0), PCI_SECONDARY_BUS,0x00);
- pci_write_config_byte(PCI_BDF(0,0,0), PCI_SUBORDINATE_BUS,0x1F);
-/* #endif */
-
-
- *(u32 *)(0xf8008000)= 0x80200000;
- debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
- *(u32 *)(0xf8008000)= 0x80200000;
- debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
- *(u32 *)(0xf8008000)= 0x80200000;
- debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
-
-
- hose->last_busno = pci_hose_scan(hose);
- hose->last_busno = 0x21;
- debug("pex_mpc86xx_init: last_busno %x\n",hose->last_busno);
- debug("pex_mpc86xx init: current_busno %x\n ",hose->current_busno);
-
-
- printf("....PCI scan & enumeration done\n");
-
-/* *(u32 *)(0xf8008000)= 0x80000000 | (0x12 << 11); */
-/* printf("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); */
-
-/* if (hose->last_busno < 1) { */
-/* hose->last_busno=1; /\*Hack*\/ */
-/* } else { */
-/* hose->last_busno = 0; */
-/* } */
-/*}*/
-/* pci_read_config_dword (PCI_BDF(1,0,0), 0x18, ®32); */
-/* printf("pex_mpc86xx_init: pex cr %2x %8x\n",0x18, reg32); */
-
+ hose->last_busno = pci_hose_scan(hose);
+ debug("pcie_mpc86xx_init: last_busno %x\n", hose->last_busno);
+ debug("pcie_mpc86xx init: current_busno %x\n ", hose->current_busno);
+ printf("....PCIE1 scan & enumeration done\n");
}
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCI */