/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_ddr_t *ddr = &immap->im_ddr;
- volatile ccsr_gur_t *gur = &immap->im_gur;
spd_eeprom_t spd;
unsigned int n_ranks;
unsigned int rank_density;
- unsigned int odt_rd_cfg, odt_wr_cfg;
+ unsigned int odt_rd_cfg, odt_wr_cfg, ba_bits;
unsigned int odt_cfg, mode_odt_enable;
unsigned int refresh_clk;
#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
unsigned int max_data_rate, effective_data_rate;
unsigned int busfreq;
unsigned sdram_cfg;
- unsigned int memsize;
+ unsigned int memsize = 0;
unsigned char caslat, caslat_ctrl;
unsigned int trfc, trfc_clk, trfc_low, trfc_high;
unsigned int trcd_clk;
unsigned int mode_caslat;
unsigned char sdram_type;
unsigned char d_init;
+ unsigned int bnds;
+
+ /*
+ * Skip configuration if already configured.
+ * memsize is determined from last configured chip select.
+ */
+ if (ddr->cs0_config & 0x80000000) {
+ debug(" cs0 already configured, bnds=%x\n",ddr->cs0_bnds);
+ bnds = 0xfff & ddr->cs0_bnds;
+ if (bnds < 0xff) { /* do not add if at top of 4G */
+ memsize = (bnds + 1) << 4;
+ }
+ }
+ if (ddr->cs1_config & 0x80000000) {
+ debug(" cs1 already configured, bnds=%x\n",ddr->cs1_bnds);
+ bnds = 0xfff & ddr->cs1_bnds;
+ if (bnds < 0xff) { /* do not add if at top of 4G */
+ memsize = (bnds + 1) << 4; /* assume ordered bnds */
+ }
+ }
+ if (ddr->cs2_config & 0x80000000) {
+ debug(" cs2 already configured, bnds=%x\n",ddr->cs2_bnds);
+ bnds = 0xfff & ddr->cs2_bnds;
+ if (bnds < 0xff) { /* do not add if at top of 4G */
+ memsize = (bnds + 1) << 4;
+ }
+ }
+ if (ddr->cs3_config & 0x80000000) {
+ debug(" cs3 already configured, bnds=%x\n",ddr->cs3_bnds);
+ bnds = 0xfff & ddr->cs3_bnds;
+ if (bnds < 0xff) { /* do not add if at top of 4G */
+ memsize = (bnds + 1) << 4;
+ }
+ }
+
+ if (memsize) {
+ printf(" Reusing current %dMB configuration\n",memsize);
+ memsize = setup_laws_and_tlbs(memsize);
+ return memsize << 20;
+ }
/*
* Read SPD information.
return 0;
}
+#ifdef CONFIG_MPC8548
/*
- * Adjust DDR II IO voltage biasing. It just makes it work.
+ * Adjust DDR II IO voltage biasing.
+ * Only 8548 rev 1 needs the fix
*/
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- gur->ddrioovcr = (0
- | 0x80000000 /* Enable */
- | 0x10000000 /* VSEL to 1.8V */
- );
+ if ((SVR_VER(get_svr()) == SVR_8548_E) &&
+ (SVR_MJREV(get_svr()) == 1) &&
+ (spd.mem_type == SPD_MEMTYPE_DDR2)) {
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ gur->ddrioovcr = (0x80000000 /* Enable */
+ | 0x10000000);/* VSEL to 1.8V */
}
+#endif
/*
* Determine the size of each Rank in bytes.
#endif
}
+ ba_bits = 0;
+ if (spd.nbanks == 0x8)
+ ba_bits = 1;
+
ddr->cs0_config = ( 1 << 31
| (odt_rd_cfg << 20)
| (odt_wr_cfg << 16)
+ | (ba_bits << 14)
| (spd.nrow_addr - 12) << 8
| (spd.ncol_addr - 8) );
debug("\n");
*/
cpo = 0;
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- if (effective_data_rate == 266 || effective_data_rate == 333) {
+ if (effective_data_rate <= 333) {
cpo = 0x7; /* READ_LAT + 5/4 */
- } else if (effective_data_rate == 400) {
- cpo = 0x9; /* READ_LAT + 7/4 */
} else {
- /* Pure speculation */
- cpo = 0xb;
+ cpo = 0x9; /* READ_LAT + 7/4 */
}
}
* Determine Refresh Rate.
*/
refresh_clk = determine_refresh_rate(spd.refresh & 0x7);
-
+
/*
* Set BSTOPRE to 0x100 for page mode
* If auto-charge is used, set BSTOPRE = 0
* Is this an ECC DDR chip?
* But don't mess with it if the DDR controller will init mem.
*/
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+#ifdef CONFIG_DDR_ECC
if (spd.config == 0x02) {
+#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER
ddr->err_disable = 0x0000000d;
+#endif
ddr->err_sbe = 0x00ff0000;
}
+
debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
-#endif
+#endif /* CONFIG_DDR_ECC */
asm("sync;isync;msync");
udelay(500);
if (spd.mem_type == SPD_MEMTYPE_DDR)
clk_adjust = 0x6;
else
+#ifdef CONFIG_MPC8568
+ /* Empirally setting clk_adjust */
+ clk_adjust = 0x6;
+#else
clk_adjust = 0x7;
+#endif
ddr->sdram_clk_cntl = (0
| 0x80000000
break;
case 256:
case 512:
+ tlb_size = BOOKE_PAGESZ_256M;
+ break;
case 1024:
case 2048:
- tlb_size = BOOKE_PAGESZ_256M;
+ if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx))
+ tlb_size = BOOKE_PAGESZ_1G;
+ else
+ tlb_size = BOOKE_PAGESZ_256M;
break;
default:
puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n");
/*
* The memory was not able to be mapped.
+ * Default to a small size.
*/
- return 0;
+ tlb_size = BOOKE_PAGESZ_64M;
+ memsize=64;
break;
}
projects / platform / kernel / u-boot.git / blobdiff